All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: x86@kernel.org, jpoimboe@redhat.com, andrew.cooper3@citrix.com
Cc: linux-kernel@vger.kernel.org, peterz@infradead.org,
	alexei.starovoitov@gmail.com, ndesaulniers@google.com,
	bpf@vger.kernel.org
Subject: [PATCH v3 04/16] objtool,x86: Replace alternatives with .retpoline_sites
Date: Tue, 26 Oct 2021 14:01:36 +0200	[thread overview]
Message-ID: <20211026120309.850007165@infradead.org> (raw)
In-Reply-To: 20211026120132.613201817@infradead.org

Instead of writing complete alternatives, simply provide a list of all
the retpoline thunk calls. Then the kernel is free to do with them as
it pleases. Simpler code all-round.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 arch/x86/kernel/vmlinux.lds.S       |   14 +++
 tools/objtool/arch/x86/decode.c     |  120 --------------------------------
 tools/objtool/check.c               |  132 +++++++++++++++++++++++++-----------
 tools/objtool/elf.c                 |   84 ----------------------
 tools/objtool/include/objtool/elf.h |    1 
 tools/objtool/special.c             |    8 --
 6 files changed, 107 insertions(+), 252 deletions(-)

--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -272,6 +272,20 @@ SECTIONS
 		__parainstructions_end = .;
 	}
 
+#ifdef CONFIG_RETPOLINE
+	/*
+	 * List of instructions that call/jmp/jcc to retpoline thunks
+	 * __x86_indirect_thunk_*(). These instructions can be patched along
+	 * with alternatives, after which the section can be freed.
+	 */
+	. = ALIGN(8);
+	.retpoline_sites : AT(ADDR(.retpoline_sites) - LOAD_OFFSET) {
+		__retpoline_sites = .;
+		*(.retpoline_sites)
+		__retpoline_sites_end = .;
+	}
+#endif
+
 	/*
 	 * struct alt_inst entries. From the header (alternative.h):
 	 * "Alternative instructions for different CPU types or capabilities"
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -711,126 +711,6 @@ const char *arch_ret_insn(int len)
 	return ret[len-1];
 }
 
-/* asm/alternative.h ? */
-
-#define ALTINSTR_FLAG_INV	(1 << 15)
-#define ALT_NOT(feat)		((feat) | ALTINSTR_FLAG_INV)
-
-struct alt_instr {
-	s32 instr_offset;	/* original instruction */
-	s32 repl_offset;	/* offset to replacement instruction */
-	u16 cpuid;		/* cpuid bit set for replacement */
-	u8  instrlen;		/* length of original instruction */
-	u8  replacementlen;	/* length of new instruction */
-} __packed;
-
-static int elf_add_alternative(struct elf *elf,
-			       struct instruction *orig, struct symbol *sym,
-			       int cpuid, u8 orig_len, u8 repl_len)
-{
-	const int size = sizeof(struct alt_instr);
-	struct alt_instr *alt;
-	struct section *sec;
-	Elf_Scn *s;
-
-	sec = find_section_by_name(elf, ".altinstructions");
-	if (!sec) {
-		sec = elf_create_section(elf, ".altinstructions",
-					 SHF_ALLOC, 0, 0);
-
-		if (!sec) {
-			WARN_ELF("elf_create_section");
-			return -1;
-		}
-	}
-
-	s = elf_getscn(elf->elf, sec->idx);
-	if (!s) {
-		WARN_ELF("elf_getscn");
-		return -1;
-	}
-
-	sec->data = elf_newdata(s);
-	if (!sec->data) {
-		WARN_ELF("elf_newdata");
-		return -1;
-	}
-
-	sec->data->d_size = size;
-	sec->data->d_align = 1;
-
-	alt = sec->data->d_buf = malloc(size);
-	if (!sec->data->d_buf) {
-		perror("malloc");
-		return -1;
-	}
-	memset(sec->data->d_buf, 0, size);
-
-	if (elf_add_reloc_to_insn(elf, sec, sec->sh.sh_size,
-				  R_X86_64_PC32, orig->sec, orig->offset)) {
-		WARN("elf_create_reloc: alt_instr::instr_offset");
-		return -1;
-	}
-
-	if (elf_add_reloc(elf, sec, sec->sh.sh_size + 4,
-			  R_X86_64_PC32, sym, 0)) {
-		WARN("elf_create_reloc: alt_instr::repl_offset");
-		return -1;
-	}
-
-	alt->cpuid = bswap_if_needed(cpuid);
-	alt->instrlen = orig_len;
-	alt->replacementlen = repl_len;
-
-	sec->sh.sh_size += size;
-	sec->changed = true;
-
-	return 0;
-}
-
-#define X86_FEATURE_RETPOLINE                ( 7*32+12)
-
-int arch_rewrite_retpolines(struct objtool_file *file)
-{
-	struct instruction *insn;
-	struct reloc *reloc;
-	struct symbol *sym;
-	char name[32] = "";
-
-	list_for_each_entry(insn, &file->retpoline_call_list, call_node) {
-
-		if (insn->type != INSN_JUMP_DYNAMIC &&
-		    insn->type != INSN_CALL_DYNAMIC)
-			continue;
-
-		if (!strcmp(insn->sec->name, ".text.__x86.indirect_thunk"))
-			continue;
-
-		reloc = insn->reloc;
-
-		sprintf(name, "__x86_indirect_alt_%s_%s",
-			insn->type == INSN_JUMP_DYNAMIC ? "jmp" : "call",
-			reloc->sym->name + 21);
-
-		sym = find_symbol_by_name(file->elf, name);
-		if (!sym) {
-			sym = elf_create_undef_symbol(file->elf, name);
-			if (!sym) {
-				WARN("elf_create_undef_symbol");
-				return -1;
-			}
-		}
-
-		if (elf_add_alternative(file->elf, insn, sym,
-					ALT_NOT(X86_FEATURE_RETPOLINE), 5, 5)) {
-			WARN("elf_add_alternative");
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
 int arch_decode_hint_reg(u8 sp_reg, int *base)
 {
 	switch (sp_reg) {
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -683,6 +683,52 @@ static int create_static_call_sections(s
 	return 0;
 }
 
+static int create_retpoline_sites_sections(struct objtool_file *file)
+{
+	struct instruction *insn;
+	struct section *sec;
+	int idx;
+
+	sec = find_section_by_name(file->elf, ".retpoline_sites");
+	if (sec) {
+		WARN("file already has .retpoline_sites, skipping");
+		return 0;
+	}
+
+	idx = 0;
+	list_for_each_entry(insn, &file->retpoline_call_list, call_node)
+		idx++;
+
+	if (!idx)
+		return 0;
+
+	sec = elf_create_section(file->elf, ".retpoline_sites", 0,
+				 sizeof(int), idx);
+	if (!sec) {
+		WARN("elf_create_section: .retpoline_sites");
+		return -1;
+	}
+
+	idx = 0;
+	list_for_each_entry(insn, &file->retpoline_call_list, call_node) {
+
+		int *site = (int *)sec->data->d_buf + idx;
+		*site = 0;
+
+		if (elf_add_reloc_to_insn(file->elf, sec,
+					  idx * sizeof(int),
+					  R_X86_64_PC32,
+					  insn->sec, insn->offset)) {
+			WARN("elf_add_reloc_to_insn: .retpoline_sites");
+			return -1;
+		}
+
+		idx++;
+	}
+
+	return 0;
+}
+
 static int create_mcount_loc_sections(struct objtool_file *file)
 {
 	struct section *sec;
@@ -1013,6 +1059,11 @@ static void annotate_call_site(struct ob
 		return;
 	}
 
+	if (sym->retpoline_thunk) {
+		list_add_tail(&insn->call_node, &file->retpoline_call_list);
+		return;
+	}
+
 	/*
 	 * Many compilers cannot disable KCOV with a function attribute
 	 * so they need a little help, NOP out any KCOV calls from noinstr
@@ -1073,6 +1124,39 @@ static void add_call_dest(struct objtool
 	annotate_call_site(file, insn, sibling);
 }
 
+static void add_retpoline_call(struct objtool_file *file, struct instruction *insn)
+{
+	/*
+	 * Retpoline calls/jumps are really dynamic calls/jumps in disguise,
+	 * so convert them accordingly.
+	 */
+	switch (insn->type) {
+	case INSN_CALL:
+		insn->type = INSN_CALL_DYNAMIC;
+		break;
+	case INSN_JUMP_UNCONDITIONAL:
+		insn->type = INSN_JUMP_DYNAMIC;
+		break;
+	case INSN_JUMP_CONDITIONAL:
+		insn->type = INSN_JUMP_DYNAMIC_CONDITIONAL;
+		break;
+	default:
+		return;
+	}
+
+	insn->retpoline_safe = true;
+
+	/*
+	 * Whatever stack impact regular CALLs have, should be undone
+	 * by the RETURN of the called function.
+	 *
+	 * Annotated intra-function calls retain the stack_ops but
+	 * are converted to JUMP, see read_intra_function_calls().
+	 */
+	remove_insn_ops(insn);
+
+	annotate_call_site(file, insn, false);
+}
 /*
  * Find the destination instructions for all jumps.
  */
@@ -1095,19 +1179,7 @@ static int add_jump_destinations(struct
 			dest_sec = reloc->sym->sec;
 			dest_off = arch_dest_reloc_offset(reloc->addend);
 		} else if (reloc->sym->retpoline_thunk) {
-			/*
-			 * Retpoline jumps are really dynamic jumps in
-			 * disguise, so convert them accordingly.
-			 */
-			if (insn->type == INSN_JUMP_UNCONDITIONAL)
-				insn->type = INSN_JUMP_DYNAMIC;
-			else
-				insn->type = INSN_JUMP_DYNAMIC_CONDITIONAL;
-
-			list_add_tail(&insn->call_node,
-				      &file->retpoline_call_list);
-
-			insn->retpoline_safe = true;
+			add_retpoline_call(file, insn);
 			continue;
 		} else if (insn->func) {
 			/* internal or external sibling call (with reloc) */
@@ -1236,18 +1308,7 @@ static int add_call_destinations(struct
 			add_call_dest(file, insn, dest, false);
 
 		} else if (reloc->sym->retpoline_thunk) {
-			/*
-			 * Retpoline calls are really dynamic calls in
-			 * disguise, so convert them accordingly.
-			 */
-			insn->type = INSN_CALL_DYNAMIC;
-			insn->retpoline_safe = true;
-
-			list_add_tail(&insn->call_node,
-				      &file->retpoline_call_list);
-
-			remove_insn_ops(insn);
-			continue;
+			add_retpoline_call(file, insn);
 
 		} else
 			add_call_dest(file, insn, reloc->sym, false);
@@ -1972,11 +2033,6 @@ static void mark_rodata(struct objtool_f
 	file->rodata = found;
 }
 
-__weak int arch_rewrite_retpolines(struct objtool_file *file)
-{
-	return 0;
-}
-
 static int decode_sections(struct objtool_file *file)
 {
 	int ret;
@@ -2049,15 +2105,6 @@ static int decode_sections(struct objtoo
 	if (ret)
 		return ret;
 
-	/*
-	 * Must be after add_special_section_alts(), since this will emit
-	 * alternatives. Must be after add_{jump,call}_destination(), since
-	 * those create the call insn lists.
-	 */
-	ret = arch_rewrite_retpolines(file);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 
@@ -3460,6 +3507,13 @@ int check(struct objtool_file *file)
 		goto out;
 	warnings += ret;
 
+	if (retpoline) {
+		ret = create_retpoline_sites_sections(file);
+		if (ret < 0)
+			goto out;
+		warnings += ret;
+	}
+
 	if (mcount) {
 		ret = create_mcount_loc_sections(file);
 		if (ret < 0)
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -741,90 +741,6 @@ static int elf_add_string(struct elf *el
 	return len;
 }
 
-struct symbol *elf_create_undef_symbol(struct elf *elf, const char *name)
-{
-	struct section *symtab, *symtab_shndx;
-	struct symbol *sym;
-	Elf_Data *data;
-	Elf_Scn *s;
-
-	sym = malloc(sizeof(*sym));
-	if (!sym) {
-		perror("malloc");
-		return NULL;
-	}
-	memset(sym, 0, sizeof(*sym));
-
-	sym->name = strdup(name);
-
-	sym->sym.st_name = elf_add_string(elf, NULL, sym->name);
-	if (sym->sym.st_name == -1)
-		return NULL;
-
-	sym->sym.st_info = GELF_ST_INFO(STB_GLOBAL, STT_NOTYPE);
-	// st_other 0
-	// st_shndx 0
-	// st_value 0
-	// st_size 0
-
-	symtab = find_section_by_name(elf, ".symtab");
-	if (!symtab) {
-		WARN("can't find .symtab");
-		return NULL;
-	}
-
-	s = elf_getscn(elf->elf, symtab->idx);
-	if (!s) {
-		WARN_ELF("elf_getscn");
-		return NULL;
-	}
-
-	data = elf_newdata(s);
-	if (!data) {
-		WARN_ELF("elf_newdata");
-		return NULL;
-	}
-
-	data->d_buf = &sym->sym;
-	data->d_size = sizeof(sym->sym);
-	data->d_align = 1;
-	data->d_type = ELF_T_SYM;
-
-	sym->idx = symtab->sh.sh_size / sizeof(sym->sym);
-
-	symtab->sh.sh_size += data->d_size;
-	symtab->changed = true;
-
-	symtab_shndx = find_section_by_name(elf, ".symtab_shndx");
-	if (symtab_shndx) {
-		s = elf_getscn(elf->elf, symtab_shndx->idx);
-		if (!s) {
-			WARN_ELF("elf_getscn");
-			return NULL;
-		}
-
-		data = elf_newdata(s);
-		if (!data) {
-			WARN_ELF("elf_newdata");
-			return NULL;
-		}
-
-		data->d_buf = &sym->sym.st_size; /* conveniently 0 */
-		data->d_size = sizeof(Elf32_Word);
-		data->d_align = 4;
-		data->d_type = ELF_T_WORD;
-
-		symtab_shndx->sh.sh_size += 4;
-		symtab_shndx->changed = true;
-	}
-
-	sym->sec = find_section_by_index(elf, 0);
-
-	elf_add_symbol(elf, sym);
-
-	return sym;
-}
-
 struct section *elf_create_section(struct elf *elf, const char *name,
 				   unsigned int sh_flags, size_t entsize, int nr)
 {
--- a/tools/objtool/include/objtool/elf.h
+++ b/tools/objtool/include/objtool/elf.h
@@ -142,7 +142,6 @@ int elf_write_insn(struct elf *elf, stru
 		   unsigned long offset, unsigned int len,
 		   const char *insn);
 int elf_write_reloc(struct elf *elf, struct reloc *reloc);
-struct symbol *elf_create_undef_symbol(struct elf *elf, const char *name);
 int elf_write(struct elf *elf);
 void elf_close(struct elf *elf);
 
--- a/tools/objtool/special.c
+++ b/tools/objtool/special.c
@@ -109,14 +109,6 @@ static int get_alt_entry(struct elf *elf
 			return -1;
 		}
 
-		/*
-		 * Skip retpoline .altinstr_replacement... we already rewrite the
-		 * instructions for retpolines anyway, see arch_is_retpoline()
-		 * usage in add_{call,jump}_destinations().
-		 */
-		if (arch_is_retpoline(new_reloc->sym))
-			return 1;
-
 		reloc_to_sec_off(new_reloc, &alt->new_sec, &alt->new_off);
 
 		/* _ASM_EXTABLE_EX hack */



  parent reply	other threads:[~2021-10-26 12:05 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-26 12:01 [PATCH v3 00/16] x86: Rewrite the retpoline rewrite logic Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 01/16] objtool: Classify symbols Peter Zijlstra
2021-10-28  3:58   ` Josh Poimboeuf
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 02/16] objtool: Explicitly avoid self modifying code in .altinstr_replacement Peter Zijlstra
2021-10-28  4:01   ` Josh Poimboeuf
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 03/16] objtool: Shrink struct instruction Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` Peter Zijlstra [this message]
2021-10-29  8:03   ` [tip: objtool/core] objtool,x86: Replace alternatives with .retpoline_sites tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 05/16] x86/retpoline: Remove unused replacement symbols Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 06/16] x86/asm: Fix register order Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 07/16] x86/asm: Fixup odd GEN-for-each-reg.h usage Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 08/16] x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 09/16] x86/retpoline: Create a retpoline thunk array Peter Zijlstra
2021-10-29  8:03   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 10/16] x86/alternative: Implement .retpoline_sites support Peter Zijlstra
2021-10-27 17:38   ` Borislav Petkov
2021-10-27 19:10     ` Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 11/16] x86/alternative: Handle Jcc __x86_indirect_thunk_\reg Peter Zijlstra
2021-10-28  9:29   ` Borislav Petkov
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 12/16] x86/alternative: Try inline spectre_v2=retpoline,amd Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 13/16] x86/alternative: Add debug prints to apply_retpolines() Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 14/16] x86,bugs: Unconditionally allow spectre_v2=retpoline,amd Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 15/16] bpf, x86: Simplify computing label offsets Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] bpf,x86: " tip-bot2 for Peter Zijlstra
2021-10-26 12:01 ` [PATCH v3 16/16] bpf,x86: Respect X86_FEATURE_RETPOLINE* Peter Zijlstra
2021-10-29  8:02   ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
2021-10-26 18:26 ` [PATCH v3 00/16] x86: Rewrite the retpoline rewrite logic Alexei Starovoitov
2021-10-26 18:45   ` Peter Zijlstra
2021-10-26 20:00     ` Alexei Starovoitov
2021-10-26 21:05       ` Peter Zijlstra
2021-10-26 21:05         ` Alexei Starovoitov
2021-10-27  9:00           ` Peter Zijlstra
2021-10-27 17:32             ` Alexei Starovoitov
2021-10-28  5:17 ` Josh Poimboeuf
2021-10-28 17:43 ` Borislav Petkov
2021-10-29 12:43 ` Miroslav Benes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211026120309.850007165@infradead.org \
    --to=peterz@infradead.org \
    --cc=alexei.starovoitov@gmail.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=bpf@vger.kernel.org \
    --cc=jpoimboe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.