[PATCH] Bluetooth: hci_sync: Set Privacy Mode when updating the resolving list

[Luiz Augusto von Dentz <luiz.dentz@gmail.com>]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds support for Set Privacy Mode when updating the resolving list
when HCI_LIMITED_PRIVACY so the controller shall use Device Mode for
devices programmed in the resolving list, Device Mode is actually
required when the remote device are not able to use RPA as otherwise the
default mode is Network Privacy Mode in which only RPA are allowed thus
the controller would filter out advertisement using the identity address
for which there is an IRK.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h |  7 ++++++
 net/bluetooth/hci_sync.c    | 48 ++++++++++++++++++++++++++++++++-----
 2 files changed, 49 insertions(+), 6 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 63065bc01b76..aa856dfd5b9f 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1930,6 +1930,13 @@ struct hci_rp_le_read_transmit_power {
 	__s8  max_le_tx_power;
 } __packed;
 
+#define HCI_OP_LE_SET_PRIVACY_MODE	0x204e
+struct hci_cp_le_set_privacy_mode {
+	__u8  bdaddr_type;
+	bdaddr_t  bdaddr;
+	__u8  mode;
+} __packed;
+
 #define HCI_OP_LE_READ_BUFFER_SIZE_V2	0x2060
 struct hci_rp_le_read_buffer_size_v2 {
 	__u8    status;
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b794605dc882..43173d645436 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1580,8 +1580,37 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
 
+/* Set Device Privacy Mode. */
+static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
+					struct hci_conn_params *params)
+{
+	struct hci_cp_le_set_privacy_mode cp;
+	struct smp_irk *irk;
+
+	/* Set Privacy Mode requires the use of resolving list (aka. LL Privacy)
+	 * by default Network Mode is used so only really send the command if
+	 * Device Mode is required (HCI_LIMITED_PRIVACY).
+	 */
+	if (!use_ll_privacy(hdev) ||
+	    !hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY))
+		return 0;
+
+	irk = hci_find_irk_by_addr(hdev, &params->addr, params->addr_type);
+	if (!irk)
+		return 0;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.bdaddr_type = irk->addr_type;
+	bacpy(&cp.bdaddr, &irk->bdaddr);
+	cp.mode = 0x01;
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PRIVACY_MODE,
+				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
+
 /* Adds connection to allow list if needed, if the device uses RPA (has IRK)
- * this attempts to program the device in the resolving list as well.
+ * this attempts to program the device in the resolving list as well and
+ * properly set the privacy mode.
  */
 static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 				       struct hci_conn_params *params,
@@ -1590,11 +1619,6 @@ static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 	struct hci_cp_le_add_to_accept_list cp;
 	int err;
 
-	/* Already in accept list */
-	if (hci_bdaddr_list_lookup(&hdev->le_accept_list, &params->addr,
-				   params->addr_type))
-		return 0;
-
 	/* Select filter policy to accept all advertising */
 	if (*num_entries >= hdev->le_accept_list_size)
 		return -ENOSPC;
@@ -1620,6 +1644,18 @@ static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 		return err;
 	}
 
+	/* Set Privacy Mode */
+	err = hci_le_set_privacy_mode_sync(hdev, params);
+	if (err) {
+		bt_dev_err(hdev, "Unable to set privacy mode: %d", err);
+		return err;
+	}
+
+	/* Check if already in accept list */
+	if (hci_bdaddr_list_lookup(&hdev->le_accept_list, &params->addr,
+				   params->addr_type))
+		return 0;
+
 	*num_entries += 1;
 	cp.bdaddr_type = params->addr_type;
 	bacpy(&cp.bdaddr, &params->addr);
-- 
2.31.1