From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] usb: xhci-mtk: add support ip-sleep wakeup for mt8195
Date: Tue, 2 Nov 2021 14:00:48 +0800 [thread overview]
Message-ID: <20211102060049.1843-2-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20211102060049.1843-1-chunfeng.yun@mediatek.com>
Add support ip-sleep wakeup for mt8195, it's a specific revision for
each USB controller, and not following IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c53f6f276d5c..63f4b6984667 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -95,6 +95,19 @@
#define WC0_SSUSB0_CDEN BIT(6)
#define WC0_IS_SPM_EN BIT(1)
+/* mt8195 */
+#define PERI_WK_CTRL0_8195 0x04
+#define WC0_IS_P_95 BIT(30) /* polarity */
+#define WC0_IS_C_95(x) ((u32)(((x) & 0x7) << 27))
+#define WC0_IS_EN_P3_95 BIT(26)
+#define WC0_IS_EN_P2_95 BIT(25)
+#define WC0_IS_EN_P1_95 BIT(24)
+
+#define PERI_WK_CTRL1_8195 0x20
+#define WC1_IS_C_95(x) ((u32)(((x) & 0xf) << 28))
+#define WC1_IS_P_95 BIT(12)
+#define WC1_IS_EN_P0_95 BIT(6)
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -105,6 +118,10 @@ enum ssusb_uwk_vers {
SSUSB_UWK_V2,
SSUSB_UWK_V1_1 = 101, /* specific revision 1.01 */
SSUSB_UWK_V1_2, /* specific revision 1.2 */
+ SSUSB_UWK_V1_3, /* mt8195 IP0 */
+ SSUSB_UWK_V1_4, /* mt8195 IP1 */
+ SSUSB_UWK_V1_5, /* mt8195 IP2 */
+ SSUSB_UWK_V1_6, /* mt8195 IP3 */
};
/*
@@ -307,6 +324,26 @@ static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
val = enable ? msk : 0;
break;
+ case SSUSB_UWK_V1_3:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL1_8195;
+ msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
+ val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_4:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P1_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P1_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_5:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_6:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
case SSUSB_UWK_V2:
reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] usb: xhci-mtk: add support ip-sleep wakeup for mt8195
Date: Tue, 2 Nov 2021 14:00:48 +0800 [thread overview]
Message-ID: <20211102060049.1843-2-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20211102060049.1843-1-chunfeng.yun@mediatek.com>
Add support ip-sleep wakeup for mt8195, it's a specific revision for
each USB controller, and not following IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c53f6f276d5c..63f4b6984667 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -95,6 +95,19 @@
#define WC0_SSUSB0_CDEN BIT(6)
#define WC0_IS_SPM_EN BIT(1)
+/* mt8195 */
+#define PERI_WK_CTRL0_8195 0x04
+#define WC0_IS_P_95 BIT(30) /* polarity */
+#define WC0_IS_C_95(x) ((u32)(((x) & 0x7) << 27))
+#define WC0_IS_EN_P3_95 BIT(26)
+#define WC0_IS_EN_P2_95 BIT(25)
+#define WC0_IS_EN_P1_95 BIT(24)
+
+#define PERI_WK_CTRL1_8195 0x20
+#define WC1_IS_C_95(x) ((u32)(((x) & 0xf) << 28))
+#define WC1_IS_P_95 BIT(12)
+#define WC1_IS_EN_P0_95 BIT(6)
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -105,6 +118,10 @@ enum ssusb_uwk_vers {
SSUSB_UWK_V2,
SSUSB_UWK_V1_1 = 101, /* specific revision 1.01 */
SSUSB_UWK_V1_2, /* specific revision 1.2 */
+ SSUSB_UWK_V1_3, /* mt8195 IP0 */
+ SSUSB_UWK_V1_4, /* mt8195 IP1 */
+ SSUSB_UWK_V1_5, /* mt8195 IP2 */
+ SSUSB_UWK_V1_6, /* mt8195 IP3 */
};
/*
@@ -307,6 +324,26 @@ static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
val = enable ? msk : 0;
break;
+ case SSUSB_UWK_V1_3:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL1_8195;
+ msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
+ val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_4:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P1_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P1_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_5:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_6:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
case SSUSB_UWK_V2:
reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] usb: xhci-mtk: add support ip-sleep wakeup for mt8195
Date: Tue, 2 Nov 2021 14:00:48 +0800 [thread overview]
Message-ID: <20211102060049.1843-2-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20211102060049.1843-1-chunfeng.yun@mediatek.com>
Add support ip-sleep wakeup for mt8195, it's a specific revision for
each USB controller, and not following IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/host/xhci-mtk.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c53f6f276d5c..63f4b6984667 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -95,6 +95,19 @@
#define WC0_SSUSB0_CDEN BIT(6)
#define WC0_IS_SPM_EN BIT(1)
+/* mt8195 */
+#define PERI_WK_CTRL0_8195 0x04
+#define WC0_IS_P_95 BIT(30) /* polarity */
+#define WC0_IS_C_95(x) ((u32)(((x) & 0x7) << 27))
+#define WC0_IS_EN_P3_95 BIT(26)
+#define WC0_IS_EN_P2_95 BIT(25)
+#define WC0_IS_EN_P1_95 BIT(24)
+
+#define PERI_WK_CTRL1_8195 0x20
+#define WC1_IS_C_95(x) ((u32)(((x) & 0xf) << 28))
+#define WC1_IS_P_95 BIT(12)
+#define WC1_IS_EN_P0_95 BIT(6)
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -105,6 +118,10 @@ enum ssusb_uwk_vers {
SSUSB_UWK_V2,
SSUSB_UWK_V1_1 = 101, /* specific revision 1.01 */
SSUSB_UWK_V1_2, /* specific revision 1.2 */
+ SSUSB_UWK_V1_3, /* mt8195 IP0 */
+ SSUSB_UWK_V1_4, /* mt8195 IP1 */
+ SSUSB_UWK_V1_5, /* mt8195 IP2 */
+ SSUSB_UWK_V1_6, /* mt8195 IP3 */
};
/*
@@ -307,6 +324,26 @@ static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
val = enable ? msk : 0;
break;
+ case SSUSB_UWK_V1_3:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL1_8195;
+ msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
+ val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_4:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P1_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P1_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_5:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
+ case SSUSB_UWK_V1_6:
+ reg = mtk->uwk_reg_base + PERI_WK_CTRL0_8195;
+ msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+ val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
+ break;
case SSUSB_UWK_V2:
reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-02 6:01 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-02 6:00 [PATCH 1/3] dt-bindings: usb: mtk-xhci: add support ip-sleep for mt8195 Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun [this message]
2021-11-02 6:00 ` [PATCH 2/3] usb: xhci-mtk: add support ip-sleep wakeup " Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun
2021-11-17 15:39 ` Matthias Brugger
2021-11-17 15:39 ` Matthias Brugger
2021-11-17 15:39 ` Matthias Brugger
2021-11-26 10:31 ` AngeloGioacchino Del Regno
2021-11-26 10:31 ` AngeloGioacchino Del Regno
2021-11-26 10:31 ` AngeloGioacchino Del Regno
2021-11-02 6:00 ` [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller " Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun
2021-11-02 6:00 ` Chunfeng Yun
2021-11-17 15:40 ` Matthias Brugger
2021-11-17 15:40 ` Matthias Brugger
2021-11-17 15:40 ` Matthias Brugger
2021-11-26 10:36 ` AngeloGioacchino Del Regno
2021-11-26 10:36 ` AngeloGioacchino Del Regno
2021-11-26 10:36 ` AngeloGioacchino Del Regno
2021-12-10 6:33 ` Chunfeng Yun
2021-12-10 6:33 ` Chunfeng Yun
2021-12-10 6:33 ` Chunfeng Yun
2021-11-12 16:57 ` [PATCH 1/3] dt-bindings: usb: mtk-xhci: add support ip-sleep " Rob Herring
2021-11-12 16:57 ` Rob Herring
2021-11-12 16:57 ` Rob Herring
2021-11-13 7:27 ` Chunfeng Yun
2021-11-13 7:27 ` Chunfeng Yun
2021-11-13 7:27 ` Chunfeng Yun
2021-11-26 10:31 ` AngeloGioacchino Del Regno
2021-11-26 10:31 ` AngeloGioacchino Del Regno
2021-11-26 10:31 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211102060049.1843-2-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.