All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v3 2/6] pinctrl: renesas: pinctrl-rzg2l: Rename RZG2L_SINGLE_PIN_GET_PORT macro
Date: Wed, 10 Nov 2021 22:46:18 +0000	[thread overview]
Message-ID: <20211110224622.16022-3-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20211110224622.16022-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

Rename RZG2L_SINGLE_PIN_GET_PORT -> RZG2L_SINGLE_PIN_GET_PORT_OFFSET.

Also, rename port -> port_offset in rzg2l_pinctrl_pinconf_set/get for
readability.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2->v3
* New patch
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 20b2af889ca9..be9af717a497 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -77,7 +77,7 @@
 #define RZG2L_SINGLE_PIN		BIT(31)
 #define RZG2L_SINGLE_PIN_PACK(p, b, f)	(RZG2L_SINGLE_PIN | \
 					 ((p) << 24) | ((b) << 20) | (f))
-#define RZG2L_SINGLE_PIN_GET_PORT(x)	(((x) & GENMASK(30, 24)) >> 24)
+#define RZG2L_SINGLE_PIN_GET_PORT_OFFSET(x)	(((x) & GENMASK(30, 24)) >> 24)
 #define RZG2L_SINGLE_PIN_GET_BIT(x)	(((x) & GENMASK(22, 20)) >> 20)
 #define RZG2L_SINGLE_PIN_GET_CFGS(x)	((x) & GENMASK(19, 0))
 
@@ -432,10 +432,10 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 	enum pin_config_param param = pinconf_to_config_param(*config);
 	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
 	unsigned int *pin_data = pin->drv_data;
+	u32 port_offset = 0, reg;
 	unsigned int arg = 0;
 	unsigned long flags;
 	void __iomem *addr;
-	u32 port = 0, reg;
 	u32 cfg = 0;
 	u8 bit = 0;
 
@@ -443,7 +443,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		return -EINVAL;
 
 	if (*pin_data & RZG2L_SINGLE_PIN) {
-		port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
+		port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
 		cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
 		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
 	}
@@ -454,7 +454,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 			return -EINVAL;
 		spin_lock_irqsave(&pctrl->lock, flags);
 		/* handle _L/_H for 32-bit register read/write */
-		addr = pctrl->base + IEN(port);
+		addr = pctrl->base + IEN(port_offset);
 		if (bit >= 4) {
 			bit -= 4;
 			addr += 4;
@@ -502,9 +502,9 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
 	unsigned int *pin_data = pin->drv_data;
 	enum pin_config_param param;
+	u32 port_offset = 0, reg;
 	unsigned long flags;
 	void __iomem *addr;
-	u32 port = 0, reg;
 	unsigned int i;
 	u32 cfg = 0;
 	u8 bit = 0;
@@ -513,7 +513,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 		return -EINVAL;
 
 	if (*pin_data & RZG2L_SINGLE_PIN) {
-		port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
+		port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
 		cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
 		bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
 	}
@@ -529,7 +529,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 				return -EINVAL;
 
 			/* handle _L/_H for 32-bit register read/write */
-			addr = pctrl->base + IEN(port);
+			addr = pctrl->base + IEN(port_offset);
 			if (bit >= 4) {
 				bit -= 4;
 				addr += 4;
-- 
2.17.1


  parent reply	other threads:[~2021-11-10 22:46 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-10 22:46 [PATCH v3 0/6] RZ/G2L: pinctrl: Support to get/set drive-strength and output-impedance-ohms Lad Prabhakar
2021-11-10 22:46 ` [PATCH v3 1/6] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add output-impedance-ohms property Lad Prabhakar
2021-11-10 22:46 ` Lad Prabhakar [this message]
2021-11-12 14:05   ` [PATCH v3 2/6] pinctrl: renesas: pinctrl-rzg2l: Rename RZG2L_SINGLE_PIN_GET_PORT macro Geert Uytterhoeven
2021-11-10 22:46 ` [PATCH v3 3/6] pinctrl: renesas: pinctrl-rzg2l: Add helper functions to read/write pin config Lad Prabhakar
2021-11-12 14:06   ` Geert Uytterhoeven
2021-11-12 14:17     ` Lad, Prabhakar
2021-11-10 22:46 ` [PATCH v3 4/6] pinctrl: renesas: pinctrl-rzg2l: Add support to get/set pin config for GPIO port pins Lad Prabhakar
2021-11-12 14:07   ` Geert Uytterhoeven
2021-11-10 22:46 ` [PATCH v3 5/6] pinctrl: renesas: pinctrl-rzg2l: Rename PIN_CFG_* macros to match HW manual Lad Prabhakar
2021-11-10 22:46 ` [PATCH v3 6/6] pinctrl: renesas: pinctrl-rzg2l: Add support to get/set drive-strength and output-impedance-ohms Lad Prabhakar
2021-11-12 14:09 ` [PATCH v3 0/6] RZ/G2L: pinctrl: Support " Geert Uytterhoeven
2021-11-12 14:17   ` Lad, Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211110224622.16022-3-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.