From: Wen Gong <quic_wgong@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <quic_wgong@quicinc.com> Subject: [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Date: Thu, 11 Nov 2021 01:53:40 -0500 [thread overview] Message-ID: <20211111065340.20187-1-quic_wgong@quicinc.com> (raw) Currently ath11k only support string type with bus, chip id and board id such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in board-2.bin. For WCN6855, it is not enough to distinguish all different chips. This is to add a new string type which include bus, chip id, board id, vendor, device, subsystem-vendor and subsystem-device for WCN6855. ath11k will first load board-2.bin and search in it for the board data with the above parameters, if matched one board data, then download it to firmware, if not matched any one, then ath11k will download the file board.bin to firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com> --- v2: remove the mask of chip id and board id in ath11k_core_create_board_name() drivers/net/wireless/ath/ath11k/core.c | 27 ++++++++++++++++++++------ drivers/net/wireless/ath/ath11k/core.h | 13 +++++++++++++ drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ 3 files changed, 44 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 2012b0170e3c..3ac0dca997e1 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -473,11 +473,26 @@ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name, scnprintf(variant, sizeof(variant), ",variant=%s", ab->qmi.target.bdf_ext); - scnprintf(name, name_len, - "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s", - ath11k_bus_str(ab->hif.bus), - ab->qmi.target.chip_id, - ab->qmi.target.board_id, variant); + switch (ab->id.bdf_search) { + case ATH11K_BDF_SEARCH_BUS_AND_BOARD: + scnprintf(name, name_len, + "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%04x,qmi-board-id=%04x%s", + ath11k_bus_str(ab->hif.bus), + ab->id.vendor, ab->id.device, + ab->id.subsystem_vendor, + ab->id.subsystem_device, + ab->qmi.target.chip_id, + ab->qmi.target.board_id, + variant); + break; + default: + scnprintf(name, name_len, + "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s", + ath11k_bus_str(ab->hif.bus), + ab->qmi.target.chip_id, + ab->qmi.target.board_id, variant); + break; + } ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot using board name '%s'\n", name); @@ -716,7 +731,7 @@ int ath11k_core_fetch_board_data_api_1(struct ath11k_base *ab, return 0; } -#define BOARD_NAME_SIZE 100 +#define BOARD_NAME_SIZE 200 int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd) { char boardname[BOARD_NAME_SIZE]; diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index dcc54d4cc096..81680da96156 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -54,6 +54,11 @@ enum ath11k_supported_bw { ATH11K_BW_160 = 3, }; +enum ath11k_bdf_search { + ATH11K_BDF_SEARCH_DEFAULT, + ATH11K_BDF_SEARCH_BUS_AND_BOARD, +}; + enum wme_ac { WME_AC_BE, WME_AC_BK, @@ -893,6 +898,14 @@ struct ath11k_base { struct completion htc_suspend; + struct { + enum ath11k_bdf_search bdf_search; + u32 vendor; + u32 device; + u32 subsystem_vendor; + u32 subsystem_device; + } id; + /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); }; diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index f262950ee414..a2acda28d35f 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -1430,6 +1430,15 @@ static int ath11k_pci_probe(struct pci_dev *pdev, goto err_free_core; } + ath11k_dbg(ab, ATH11K_DBG_BOOT, "pci probe %04x:%04x %04x:%04x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device); + + ab->id.vendor = pdev->vendor; + ab->id.device = pdev->device; + ab->id.subsystem_vendor = pdev->subsystem_vendor; + ab->id.subsystem_device = pdev->subsystem_device; + switch (pci_dev->device) { case QCA6390_DEVICE_ID: ath11k_pci_read_hw_version(ab, &soc_hw_version_major, @@ -1452,6 +1461,7 @@ static int ath11k_pci_probe(struct pci_dev *pdev, ab->hw_rev = ATH11K_HW_QCN9074_HW10; break; case WCN6855_DEVICE_ID: + ab->id.bdf_search = ATH11K_BDF_SEARCH_BUS_AND_BOARD; ath11k_pci_read_hw_version(ab, &soc_hw_version_major, &soc_hw_version_minor); switch (soc_hw_version_major) { -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <quic_wgong@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <quic_wgong@quicinc.com> Subject: [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Date: Thu, 11 Nov 2021 01:53:40 -0500 [thread overview] Message-ID: <20211111065340.20187-1-quic_wgong@quicinc.com> (raw) Currently ath11k only support string type with bus, chip id and board id such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for ahb bus chip and "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCIe bus chip in board-2.bin. For WCN6855, it is not enough to distinguish all different chips. This is to add a new string type which include bus, chip id, board id, vendor, device, subsystem-vendor and subsystem-device for WCN6855. ath11k will first load board-2.bin and search in it for the board data with the above parameters, if matched one board data, then download it to firmware, if not matched any one, then ath11k will download the file board.bin to firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com> --- v2: remove the mask of chip id and board id in ath11k_core_create_board_name() drivers/net/wireless/ath/ath11k/core.c | 27 ++++++++++++++++++++------ drivers/net/wireless/ath/ath11k/core.h | 13 +++++++++++++ drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ 3 files changed, 44 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 2012b0170e3c..3ac0dca997e1 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -473,11 +473,26 @@ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name, scnprintf(variant, sizeof(variant), ",variant=%s", ab->qmi.target.bdf_ext); - scnprintf(name, name_len, - "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s", - ath11k_bus_str(ab->hif.bus), - ab->qmi.target.chip_id, - ab->qmi.target.board_id, variant); + switch (ab->id.bdf_search) { + case ATH11K_BDF_SEARCH_BUS_AND_BOARD: + scnprintf(name, name_len, + "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%04x,qmi-board-id=%04x%s", + ath11k_bus_str(ab->hif.bus), + ab->id.vendor, ab->id.device, + ab->id.subsystem_vendor, + ab->id.subsystem_device, + ab->qmi.target.chip_id, + ab->qmi.target.board_id, + variant); + break; + default: + scnprintf(name, name_len, + "bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s", + ath11k_bus_str(ab->hif.bus), + ab->qmi.target.chip_id, + ab->qmi.target.board_id, variant); + break; + } ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot using board name '%s'\n", name); @@ -716,7 +731,7 @@ int ath11k_core_fetch_board_data_api_1(struct ath11k_base *ab, return 0; } -#define BOARD_NAME_SIZE 100 +#define BOARD_NAME_SIZE 200 int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd) { char boardname[BOARD_NAME_SIZE]; diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index dcc54d4cc096..81680da96156 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -54,6 +54,11 @@ enum ath11k_supported_bw { ATH11K_BW_160 = 3, }; +enum ath11k_bdf_search { + ATH11K_BDF_SEARCH_DEFAULT, + ATH11K_BDF_SEARCH_BUS_AND_BOARD, +}; + enum wme_ac { WME_AC_BE, WME_AC_BK, @@ -893,6 +898,14 @@ struct ath11k_base { struct completion htc_suspend; + struct { + enum ath11k_bdf_search bdf_search; + u32 vendor; + u32 device; + u32 subsystem_vendor; + u32 subsystem_device; + } id; + /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); }; diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index f262950ee414..a2acda28d35f 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -1430,6 +1430,15 @@ static int ath11k_pci_probe(struct pci_dev *pdev, goto err_free_core; } + ath11k_dbg(ab, ATH11K_DBG_BOOT, "pci probe %04x:%04x %04x:%04x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device); + + ab->id.vendor = pdev->vendor; + ab->id.device = pdev->device; + ab->id.subsystem_vendor = pdev->subsystem_vendor; + ab->id.subsystem_device = pdev->subsystem_device; + switch (pci_dev->device) { case QCA6390_DEVICE_ID: ath11k_pci_read_hw_version(ab, &soc_hw_version_major, @@ -1452,6 +1461,7 @@ static int ath11k_pci_probe(struct pci_dev *pdev, ab->hw_rev = ATH11K_HW_QCN9074_HW10; break; case WCN6855_DEVICE_ID: + ab->id.bdf_search = ATH11K_BDF_SEARCH_BUS_AND_BOARD; ath11k_pci_read_hw_version(ab, &soc_hw_version_major, &soc_hw_version_minor); switch (soc_hw_version_major) { -- 2.31.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2021-11-11 6:53 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-11 6:53 Wen Gong [this message] 2021-11-11 6:53 ` [PATCH v2] ath11k: add string type to search board data in board-2.bin for WCN6855 Wen Gong 2021-11-15 12:33 ` Kalle Valo 2021-11-15 12:33 ` Kalle Valo 2021-11-17 7:30 ` Kalle Valo 2021-11-17 7:30 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211111065340.20187-1-quic_wgong@quicinc.com \ --to=quic_wgong@quicinc.com \ --cc=ath11k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.