All of lore.kernel.org
 help / color / mirror / Atom feed
From: Artem Lapkin <email2tema@gmail.com>
To: heiko@sntech.de, linux-rockchip@lists.infradead.org
Cc: robh+dt@kernel.org, jbx6244@gmail.com, wenst@chromium.org,
	christianshewitt@gmail.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, art@khadas.com,
	nick@khadas.com, gouwa@khadas.com
Subject: [PATCH v2] arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
Date: Mon, 15 Nov 2021 16:33:21 +0800	[thread overview]
Message-ID: <20211115083321.2627461-1-art@khadas.com> (raw)

Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.

Before (BJTD4R 29.1 GiB):

[    7.001493] mmc2: CQHCI version 5.10
[    7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[    7.207086] mmc2: mmc_select_hs400es failed, error -110
[    7.207129] mmc2: error -110 whilst initialising MMC card
[    7.308893] mmc2: mmc_select_hs400es failed, error -110
[    7.308921] mmc2: error -110 whilst initialising MMC card
[    7.427524] mmc2: mmc_select_hs400es failed, error -110
[    7.427546] mmc2: error -110 whilst initialising MMC card
[    7.590993] mmc2: mmc_select_hs400es failed, error -110
[    7.591012] mmc2: error -110 whilst initialising MMC card

After:

[    6.960785] mmc2: CQHCI version 5.10
[    6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    7.175021] mmc2: Command Queue Engine enabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
[    7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[    7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[    7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[    7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)

Signed-off-by: Artem Lapkin <art@khadas.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
 1 file changed, 1 deletion(-)

V2: update & tidy commit message + put testing information here
(suggested by Christian Hewitt <christianshewitt@gmail.com> )

Testing with a selection of eMMC modules shows no observable performance
difference. For example, testing with DUTA42 116 GiB & BJTD4R 29.1 GiB:

..... mmc-hs400-enhanced-strobe disabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
786432000 bytes (786 MB, 750 MiB) copied, 3 s, 262 MB/s

..... mmc-hs400-enhanced-strobe enabled
[    7.135880] mmc2: Command Queue Engine enabled
[    7.135928] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    7.136992] mmcblk2: mmc2:0001 DUTA42 116 GiB
1048576000 bytes (1.0 GB, 1000 MiB) copied, 4 s, 262 MB/s

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index d5c7648c841d..f1fcc6b5b402 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -705,7 +705,6 @@ &sdmmc {
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Artem Lapkin <email2tema@gmail.com>
To: heiko@sntech.de, linux-rockchip@lists.infradead.org
Cc: robh+dt@kernel.org, jbx6244@gmail.com, wenst@chromium.org,
	christianshewitt@gmail.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, art@khadas.com,
	nick@khadas.com, gouwa@khadas.com
Subject: [PATCH v2] arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
Date: Mon, 15 Nov 2021 16:33:21 +0800	[thread overview]
Message-ID: <20211115083321.2627461-1-art@khadas.com> (raw)

Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.

Before (BJTD4R 29.1 GiB):

[    7.001493] mmc2: CQHCI version 5.10
[    7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[    7.207086] mmc2: mmc_select_hs400es failed, error -110
[    7.207129] mmc2: error -110 whilst initialising MMC card
[    7.308893] mmc2: mmc_select_hs400es failed, error -110
[    7.308921] mmc2: error -110 whilst initialising MMC card
[    7.427524] mmc2: mmc_select_hs400es failed, error -110
[    7.427546] mmc2: error -110 whilst initialising MMC card
[    7.590993] mmc2: mmc_select_hs400es failed, error -110
[    7.591012] mmc2: error -110 whilst initialising MMC card

After:

[    6.960785] mmc2: CQHCI version 5.10
[    6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    7.175021] mmc2: Command Queue Engine enabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
[    7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[    7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[    7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[    7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)

Signed-off-by: Artem Lapkin <art@khadas.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
 1 file changed, 1 deletion(-)

V2: update & tidy commit message + put testing information here
(suggested by Christian Hewitt <christianshewitt@gmail.com> )

Testing with a selection of eMMC modules shows no observable performance
difference. For example, testing with DUTA42 116 GiB & BJTD4R 29.1 GiB:

..... mmc-hs400-enhanced-strobe disabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
786432000 bytes (786 MB, 750 MiB) copied, 3 s, 262 MB/s

..... mmc-hs400-enhanced-strobe enabled
[    7.135880] mmc2: Command Queue Engine enabled
[    7.135928] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    7.136992] mmcblk2: mmc2:0001 DUTA42 116 GiB
1048576000 bytes (1.0 GB, 1000 MiB) copied, 4 s, 262 MB/s

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index d5c7648c841d..f1fcc6b5b402 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -705,7 +705,6 @@ &sdmmc {
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Artem Lapkin <email2tema@gmail.com>
To: heiko@sntech.de, linux-rockchip@lists.infradead.org
Cc: robh+dt@kernel.org, jbx6244@gmail.com, wenst@chromium.org,
	christianshewitt@gmail.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, art@khadas.com,
	nick@khadas.com, gouwa@khadas.com
Subject: [PATCH v2] arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
Date: Mon, 15 Nov 2021 16:33:21 +0800	[thread overview]
Message-ID: <20211115083321.2627461-1-art@khadas.com> (raw)

Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.

Before (BJTD4R 29.1 GiB):

[    7.001493] mmc2: CQHCI version 5.10
[    7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[    7.207086] mmc2: mmc_select_hs400es failed, error -110
[    7.207129] mmc2: error -110 whilst initialising MMC card
[    7.308893] mmc2: mmc_select_hs400es failed, error -110
[    7.308921] mmc2: error -110 whilst initialising MMC card
[    7.427524] mmc2: mmc_select_hs400es failed, error -110
[    7.427546] mmc2: error -110 whilst initialising MMC card
[    7.590993] mmc2: mmc_select_hs400es failed, error -110
[    7.591012] mmc2: error -110 whilst initialising MMC card

After:

[    6.960785] mmc2: CQHCI version 5.10
[    6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    7.175021] mmc2: Command Queue Engine enabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
[    7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[    7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[    7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[    7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)

Signed-off-by: Artem Lapkin <art@khadas.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
 1 file changed, 1 deletion(-)

V2: update & tidy commit message + put testing information here
(suggested by Christian Hewitt <christianshewitt@gmail.com> )

Testing with a selection of eMMC modules shows no observable performance
difference. For example, testing with DUTA42 116 GiB & BJTD4R 29.1 GiB:

..... mmc-hs400-enhanced-strobe disabled
[    7.175053] mmc2: new HS400 MMC card at address 0001
786432000 bytes (786 MB, 750 MiB) copied, 3 s, 262 MB/s

..... mmc-hs400-enhanced-strobe enabled
[    7.135880] mmc2: Command Queue Engine enabled
[    7.135928] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    7.136992] mmcblk2: mmc2:0001 DUTA42 116 GiB
1048576000 bytes (1.0 GB, 1000 MiB) copied, 4 s, 262 MB/s

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index d5c7648c841d..f1fcc6b5b402 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -705,7 +705,6 @@ &sdmmc {
 &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-11-15  8:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-15  8:33 Artem Lapkin [this message]
2021-11-15  8:33 ` [PATCH v2] arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge Artem Lapkin
2021-11-15  8:33 ` Artem Lapkin
2021-11-21 18:52 ` Heiko Stuebner
2021-11-21 18:52   ` Heiko Stuebner
2021-11-21 18:52   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211115083321.2627461-1-art@khadas.com \
    --to=email2tema@gmail.com \
    --cc=art@khadas.com \
    --cc=christianshewitt@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gouwa@khadas.com \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=nick@khadas.com \
    --cc=robh+dt@kernel.org \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.