[PATCH v3 3/9] backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion

[Marijn Suijten <marijn.suijten@somainline.org>]

The kernel already provides appropriate primitives to perform endianness
conversion which should be used in favour of manual bit-wrangling.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/video/backlight/qcom-wled.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index d413b913fef3..9d883e702134 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -231,14 +231,14 @@ struct wled {
 static int wled3_set_brightness(struct wled *wled, u16 brightness)
 {
 	int rc, i;
-	u8 v[2];
+	__le16 v;
 
-	v[0] = brightness & 0xff;
-	v[1] = (brightness >> 8) & 0xf;
+	v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
 
 	for (i = 0;  i < wled->cfg.num_strings; ++i) {
 		rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
-				       WLED3_SINK_REG_BRIGHT(i), v, 2);
+				       WLED3_SINK_REG_BRIGHT(i),
+				       &v, sizeof(v));
 		if (rc < 0)
 			return rc;
 	}
@@ -250,18 +250,18 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
 {
 	int rc, i;
 	u16 low_limit = wled->max_brightness * 4 / 1000;
-	u8 v[2];
+	__le16 v;
 
 	/* WLED4's lower limit of operation is 0.4% */
 	if (brightness > 0 && brightness < low_limit)
 		brightness = low_limit;
 
-	v[0] = brightness & 0xff;
-	v[1] = (brightness >> 8) & 0xf;
+	v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
 
 	for (i = 0;  i < wled->cfg.num_strings; ++i) {
 		rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
-				       WLED4_SINK_REG_BRIGHT(i), v, 2);
+				       WLED4_SINK_REG_BRIGHT(i),
+				       &v, sizeof(v));
 		if (rc < 0)
 			return rc;
 	}
@@ -273,21 +273,20 @@ static int wled5_set_brightness(struct wled *wled, u16 brightness)
 {
 	int rc, offset;
 	u16 low_limit = wled->max_brightness * 1 / 1000;
-	u8 v[2];
+	__le16 v;
 
 	/* WLED5's lower limit is 0.1% */
 	if (brightness < low_limit)
 		brightness = low_limit;
 
-	v[0] = brightness & 0xff;
-	v[1] = (brightness >> 8) & 0x7f;
+	v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B);
 
 	offset = (wled->cfg.mod_sel == MOD_A) ?
 		  WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB :
 		  WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB;
 
 	rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
-			       v, 2);
+			       &v, sizeof(v));
 	return rc;
 }
 
-- 
2.33.1