From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, aisheng.dong@nxp.com, shawnguo@kernel.org, s.hauer@pengutronix.de, ulf.hansson@linaro.org, broonie@kernel.org, linux@roeck-us.net, wim@linux-watchdog.org, linux@rempel-privat.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, daniel.lezcano@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org, linux-watchdog@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP Date: Fri, 26 Nov 2021 15:39:55 +0800 [thread overview] Message-ID: <20211126074002.1535696-1-peng.fan@oss.nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> V6: Rebase to avoid conflict. V5: only fix patch 8/8 'arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board' - Correct bus-width to 8 for eMMC - Drop pinctrl enet which no user Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag V4: https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/696020.html I just pick-up Jacky's work, rebase and send out V4 based on Jacky's V3 patchset. If you prefer to split the patchset and send single patches, I could resend one by one. Note: the V3 has a gpio bindings patch, it has been separated and sent to gpio list in a single one per Linus requested. This patchset is to add i.MX8ULP in dt-bindings, introduce basic i.MX8ULP dtsi and basic evk board support. The detailed version changes are in each patch. There is checkpatch error in patch 8, but that is for device tree macro and we could use use "(xx)". In V4, the changes are in patch 8, 9 when rebasing to linux-next/master ,fix build errors after the clk driver in tree and drop a few nodes that not have bindings. Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP enabled. V3: https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping.bai@nxp.com/T/ Jacky Bai (7): dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 1 + .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ 9 files changed, 1459 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, aisheng.dong@nxp.com, shawnguo@kernel.org, s.hauer@pengutronix.de, ulf.hansson@linaro.org, broonie@kernel.org, linux@roeck-us.net, wim@linux-watchdog.org, linux@rempel-privat.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, daniel.lezcano@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org, linux-watchdog@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP Date: Fri, 26 Nov 2021 15:39:55 +0800 [thread overview] Message-ID: <20211126074002.1535696-1-peng.fan@oss.nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> V6: Rebase to avoid conflict. V5: only fix patch 8/8 'arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board' - Correct bus-width to 8 for eMMC - Drop pinctrl enet which no user Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag V4: https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/696020.html I just pick-up Jacky's work, rebase and send out V4 based on Jacky's V3 patchset. If you prefer to split the patchset and send single patches, I could resend one by one. Note: the V3 has a gpio bindings patch, it has been separated and sent to gpio list in a single one per Linus requested. This patchset is to add i.MX8ULP in dt-bindings, introduce basic i.MX8ULP dtsi and basic evk board support. The detailed version changes are in each patch. There is checkpatch error in patch 8, but that is for device tree macro and we could use use "(xx)". In V4, the changes are in patch 8, 9 when rebasing to linux-next/master ,fix build errors after the clk driver in tree and drop a few nodes that not have bindings. Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP enabled. V3: https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping.bai@nxp.com/T/ Jacky Bai (7): dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 1 + .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ 9 files changed, 1459 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-11-26 7:43 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-26 7:39 Peng Fan (OSS) [this message] 2021-11-26 7:39 ` [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP Peng Fan (OSS) 2021-11-26 7:39 ` [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string Peng Fan (OSS) 2021-11-26 7:39 ` Peng Fan (OSS) 2021-11-29 8:43 ` Wolfram Sang 2021-11-29 8:43 ` Wolfram Sang 2021-11-26 7:39 ` [PATCH V6 2/7] dt-bindings: serial: fsl-lpuart: " Peng Fan (OSS) 2021-11-26 7:39 ` Peng Fan (OSS) 2021-11-26 7:39 ` [PATCH V6 3/7] dt-bindings: timer: tpm-timer: " Peng Fan (OSS) 2021-11-26 7:39 ` Peng Fan (OSS) 2021-11-29 10:02 ` Daniel Lezcano 2021-11-29 10:02 ` Daniel Lezcano 2022-01-10 12:59 ` [tip: timers/core] " tip-bot2 for Jacky Bai 2021-11-26 7:39 ` [PATCH V6 4/7] dt-bindings: watchdog: imx7ulp-wdt: " Peng Fan (OSS) 2021-11-26 7:39 ` Peng Fan (OSS) 2021-11-26 7:40 ` [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk Peng Fan (OSS) 2021-11-26 7:40 ` Peng Fan (OSS) 2021-12-06 3:10 ` Shawn Guo 2021-12-06 3:10 ` Shawn Guo 2021-11-26 7:40 ` [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Peng Fan (OSS) 2021-11-26 7:40 ` Peng Fan (OSS) 2021-12-06 2:17 ` Shawn Guo 2021-12-06 2:17 ` Shawn Guo 2021-12-06 3:01 ` Peng Fan 2021-12-06 3:01 ` Peng Fan 2021-12-06 3:07 ` Shawn Guo 2021-12-06 3:07 ` Shawn Guo 2021-12-06 3:10 ` Shawn Guo 2021-12-06 3:10 ` Shawn Guo 2021-11-26 7:40 ` [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Peng Fan (OSS) 2021-11-26 7:40 ` Peng Fan (OSS) 2021-12-06 3:11 ` Shawn Guo 2021-12-06 3:11 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211126074002.1535696-1-peng.fan@oss.nxp.com \ --to=peng.fan@oss.nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=broonie@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@rempel-privat.de \ --cc=linux@roeck-us.net \ --cc=peng.fan@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=wim@linux-watchdog.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.