From: Simon Horman <simon.horman@corigine.com>
To: netdev@vger.kernel.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>,
Ido Schimmel <idosch@nvidia.com>,
Jamal Hadi Salim <jhs@mojatatu.com>,
Jiri Pirko <jiri@resnulli.us>, Oz Shlomo <ozsh@nvidia.com>,
Roi Dayan <roid@nvidia.com>, Vlad Buslov <vladbu@nvidia.com>,
Baowen Zheng <baowen.zheng@corigine.com>,
Louis Peens <louis.peens@corigine.com>,
oss-drivers@corigine.com,
Simon Horman <simon.horman@corigine.com>
Subject: [PATCH v5 net-next 00/12] allow user to offload tc action to net device
Date: Fri, 3 Dec 2021 13:24:32 +0100 [thread overview]
Message-ID: <20211203122444.11756-1-simon.horman@corigine.com> (raw)
Baowen Zheng says:
Allow use of flow_indr_dev_register/flow_indr_dev_setup_offload to offload
tc actions independent of flows.
The motivation for this work is to prepare for using TC police action
instances to provide hardware offload of OVS metering feature - which calls
for policers that may be used by multiple flows and whose lifecycle is
independent of any flows that use them.
This patch includes basic changes to offload drivers to return EOPNOTSUPP
if this feature is used - it is not yet supported by any driver.
Tc cli command to offload and quote an action:
# tc qdisc del dev $DEV ingress && sleep 1 || true
# tc actions delete action police index 200 || true
# tc qdisc add dev $DEV ingress
# tc qdisc show dev $DEV ingress
# tc actions add action police rate 100mbit burst 10000k index 200 skip_sw
# tc -s -d actions list action police
total acts 1
action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify
overhead 0b linklayer ethernet
ref 1 bind 0 installed 142 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc filter add dev $DEV protocol ip parent ffff: \
flower skip_sw ip_proto tcp action police index 200
# tc -s -d filter show dev $DEV protocol ip parent ffff:
filter pref 49152 flower chain 0
filter pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
skip_sw
in_hw in_hw_count 1
action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action
reclassify overhead 0b linklayer ethernet
ref 2 bind 1 installed 300 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc filter add dev $DEV protocol ipv6 parent ffff: \
flower skip_sw ip_proto tcp action police index 200
# tc -s -d filter show dev $DEV protocol ipv6 parent ffff:
filter pref 49151 flower chain 0
filter pref 49151 flower chain 0 handle 0x1
eth_type ipv6
ip_proto tcp
skip_sw
in_hw in_hw_count 1
action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action
reclassify overhead 0b linklayer ethernet
ref 3 bind 2 installed 761 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc -s -d actions list action police
total acts 1
action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet
ref 3 bind 2 installed 917 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
Changes compared to v4 patches:
* Made changes of code style according to the public review comments.
* Add a fix for unsupported mpls action type in flow action setup stage.
* Add ops to tc_action_ops for flow action setup to facilitate
adding a standalone action module.
* Add notification process when deleting action in reoffload process.
Baowen Zheng (12):
flow_offload: fill flags to action structure
flow_offload: reject to offload tc actions in offload drivers
flow_offload: add index to flow_action_entry structure
flow_offload: return EOPNOTSUPP for the unsupported mpls action type
flow_offload: add ops to tc_action_ops for flow action setup
flow_offload: allow user to offload tc action to net device
flow_offload: add skip_hw and skip_sw to control if offload the action
flow_offload: add process to update action stats from hardware
net: sched: save full flags for tc action
flow_offload: add reoffload process to update hw_count
flow_offload: validate flags of filter and actions
selftests: tc-testing: add action offload selftest for action and
filter
drivers/net/dsa/ocelot/felix_vsc9959.c | 4 +-
drivers/net/dsa/sja1105/sja1105_flower.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 2 +-
.../net/ethernet/freescale/enetc/enetc_qos.c | 6 +-
.../ethernet/mellanox/mlx5/core/en/rep/tc.c | 3 +
.../ethernet/mellanox/mlxsw/spectrum_flower.c | 2 +-
drivers/net/ethernet/mscc/ocelot_flower.c | 2 +-
.../ethernet/netronome/nfp/flower/offload.c | 3 +
include/linux/netdevice.h | 1 +
include/net/act_api.h | 27 +-
include/net/flow_offload.h | 20 +-
include/net/pkt_cls.h | 27 +-
include/net/tc_act/tc_gate.h | 5 -
include/uapi/linux/pkt_cls.h | 9 +-
net/core/flow_offload.c | 46 +-
net/sched/act_api.c | 450 +++++++++++++++++-
net/sched/act_bpf.c | 2 +-
net/sched/act_connmark.c | 2 +-
net/sched/act_csum.c | 19 +
net/sched/act_ct.c | 21 +
net/sched/act_ctinfo.c | 2 +-
net/sched/act_gact.c | 38 ++
net/sched/act_gate.c | 51 +-
net/sched/act_ife.c | 2 +-
net/sched/act_ipt.c | 2 +-
net/sched/act_mirred.c | 50 ++
net/sched/act_mpls.c | 54 ++-
net/sched/act_nat.c | 2 +-
net/sched/act_pedit.c | 36 +-
net/sched/act_police.c | 27 +-
net/sched/act_sample.c | 32 +-
net/sched/act_simple.c | 2 +-
net/sched/act_skbedit.c | 38 +-
net/sched/act_skbmod.c | 2 +-
net/sched/act_tunnel_key.c | 54 +++
net/sched/act_vlan.c | 48 ++
net/sched/cls_api.c | 263 ++--------
net/sched/cls_flower.c | 9 +-
net/sched/cls_matchall.c | 9 +-
net/sched/cls_u32.c | 12 +-
.../tc-testing/tc-tests/actions/police.json | 24 +
.../tc-testing/tc-tests/filters/matchall.json | 24 +
42 files changed, 1144 insertions(+), 290 deletions(-)
--
2.20.1
next reply other threads:[~2021-12-03 12:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-03 12:24 Simon Horman [this message]
2021-12-03 12:24 ` [PATCH v5 net-next 01/12] flow_offload: fill flags to action structure Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 02/12] flow_offload: reject to offload tc actions in offload drivers Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 03/12] flow_offload: add index to flow_action_entry structure Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 04/12] flow_offload: return EOPNOTSUPP for the unsupported mpls action type Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 05/12] flow_offload: add ops to tc_action_ops for flow action setup Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 06/12] flow_offload: allow user to offload tc action to net device Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 07/12] flow_offload: add skip_hw and skip_sw to control if offload the action Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 08/12] flow_offload: add process to update action stats from hardware Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 09/12] net: sched: save full flags for tc action Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 10/12] flow_offload: add reoffload process to update hw_count Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 11/12] flow_offload: validate flags of filter and actions Simon Horman
2021-12-03 12:24 ` [PATCH v5 net-next 12/12] selftests: tc-testing: add action offload selftest for action and filter Simon Horman
2021-12-07 1:32 [PATCH v5 net-next 10/12] flow_offload: add reoffload process to update hw_count kernel test robot
2021-12-07 12:02 ` Dan Carpenter
2021-12-07 12:02 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211203122444.11756-1-simon.horman@corigine.com \
--to=simon.horman@corigine.com \
--cc=baowen.zheng@corigine.com \
--cc=idosch@nvidia.com \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=louis.peens@corigine.com \
--cc=netdev@vger.kernel.org \
--cc=oss-drivers@corigine.com \
--cc=ozsh@nvidia.com \
--cc=roid@nvidia.com \
--cc=vladbu@nvidia.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.