From: Jagan Teki <jagan@amarulasolutions.com> To: Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-amarula@amarulasolutions.com, Matteo Lisi <matteo.lisi@engicam.com>, Jagan Teki <jagan@amarulasolutions.com> Subject: [PATCH v3 3/3] ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF Date: Fri, 3 Dec 2021 22:24:35 +0530 [thread overview] Message-ID: <20211203165435.8042-3-jagan@amarulasolutions.com> (raw) In-Reply-To: <20211203165435.8042-1-jagan@amarulasolutions.com> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM) i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - drop redundent commit details. - fix dtbs_check Changes for v2: - none arch/arm/boot/dts/Makefile | 1 + ...tm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 132 ++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8a2dfdf01ce3..47878c1e878b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1140,6 +1140,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ stm32mp157a-icore-stm32mp1-ctouch2.dtb \ + stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts new file mode 100644 index 000000000000..2a2829283456 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,icore-stm32mp1-ctouch2-of10", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>; + default-on; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight>; + power-supply = <&v3v3>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&dsi { + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&i2c6 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_pins_a>; + pinctrl-1 = <&i2c6_sleep_pins_a>; + status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi84"; + reg = <0x2c>; + enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + data-lanes = <1 2>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-amarula@amarulasolutions.com, Matteo Lisi <matteo.lisi@engicam.com>, Jagan Teki <jagan@amarulasolutions.com> Subject: [PATCH v3 3/3] ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF Date: Fri, 3 Dec 2021 22:24:35 +0530 [thread overview] Message-ID: <20211203165435.8042-3-jagan@amarulasolutions.com> (raw) In-Reply-To: <20211203165435.8042-1-jagan@amarulasolutions.com> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM) i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - drop redundent commit details. - fix dtbs_check Changes for v2: - none arch/arm/boot/dts/Makefile | 1 + ...tm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 132 ++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8a2dfdf01ce3..47878c1e878b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1140,6 +1140,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ stm32mp157a-icore-stm32mp1-ctouch2.dtb \ + stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \ stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts new file mode 100644 index 000000000000..2a2829283456 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame"; + compatible = "engicam,icore-stm32mp1-ctouch2-of10", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>; + default-on; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight>; + power-supply = <&v3v3>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&dsi { + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&i2c6 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_pins_a>; + pinctrl-1 = <&i2c6_sleep_pins_a>; + status = "okay"; + + bridge@2c { + compatible = "ti,sn65dsi84"; + reg = <0x2c>; + enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + data-lanes = <1 2>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-12-03 16:55 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-03 16:54 [PATCH v3 1/3] ARM: dts: stm32: Enable LVDS panel on i.Core STM32MP1 EDIMM2.2 Jagan Teki 2021-12-03 16:54 ` Jagan Teki 2021-12-03 16:54 ` [PATCH v3 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF Jagan Teki 2021-12-03 16:54 ` Jagan Teki 2021-12-03 16:54 ` Jagan Teki [this message] 2021-12-03 16:54 ` [PATCH v3 3/3] ARM: dts: " Jagan Teki 2021-12-13 11:07 ` Alexandre TORGUE 2021-12-13 11:07 ` Alexandre TORGUE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211203165435.8042-3-jagan@amarulasolutions.com \ --to=jagan@amarulasolutions.com \ --cc=alexandre.torgue@foss.st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-amarula@amarulasolutions.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=matteo.lisi@engicam.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.