From: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
To: <linux-kernel@vger.kernel.org>, <jic23@kernel.org>,
<lars@metafoo.de>, <linux-iio@vger.kernel.org>, <git@xilinx.com>,
<michals@xilinx.com>, <gregkh@linuxfoundation.org>,
<rafael@kernel.org>, <linux-acpi@vger.kernel.org>,
<heikki.krogerus@linux.intel.com>
Cc: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Subject: [PATCH v12 4/5] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
Date: Fri, 3 Dec 2021 21:23:57 +0000 [thread overview]
Message-ID: <20211203212358.31444-5-anand.ashok.dumbre@xilinx.com> (raw)
In-Reply-To: <20211203212358.31444-1-anand.ashok.dumbre@xilinx.com>
Xilinx AMS have several ADC channels that can be used for measurement of
different voltages and temperatures. Document the same in the bindings.
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 227 ++++++++++++++++++
1 file changed, 227 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..87992db389b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+ - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+ The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+ that can be used to sample external voltages and monitor on-die operating
+ conditions, such as temperature and supply voltage levels.
+ The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+ PS (Processing System) SYSMON.
+ All designs should have AMS registers, but PS and PL are optional. The
+ AMS controller can work with only PS, only PL and both PS and PL
+ configurations. Please specify registers according to your design. Devicetree
+ should always have AMS module property. Providing PS & PL module is optional.
+
+ AMS Channel Details
+ ```````````````````
+ Sysmon Block |Channel| Details |Measurement
+ |Number | |Type
+ ---------------------------------------------------------------------------------------------------------
+ AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
+ |1 |Battery voltage measurement, VCC_PSBATT. |Voltage
+ |2 |PL Internal voltage measurement, VCCINT. |Voltage
+ |3 |Block RAM voltage measurement, VCCBRAM. |Voltage
+ |4 |PL Aux voltage measurement, VCCAUX. |Voltage
+ |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
+ |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
+ ---------------------------------------------------------------------------------------------------------
+ PS Sysmon |7 |LPD temperature measurement. |Temperature
+ |8 |FPD temperature measurement (REMOTE). |Temperature
+ |9 |VCC PS LPD voltage measurement (supply1). |Voltage
+ |10 |VCC PS FPD voltage measurement (supply2). |Voltage
+ |11 |PS Aux voltage reference (supply3). |Voltage
+ |12 |DDR I/O VCC voltage measurement. |Voltage
+ |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage
+ |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage
+ |15 |VCCO_PSIO1 voltage measurement. |Voltage
+ |16 |VCCO_PSIO2 voltage measurement. |Voltage
+ |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage
+ |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage
+ |19 |VCC_PSADC voltage measurement. |Voltage
+ ---------------------------------------------------------------------------------------------------------
+ PL Sysmon |20 |PL temperature measurement. |Temperature
+ |21 |PL Internal voltage measurement, VCCINT. |Voltage
+ |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage
+ |23 |ADC Reference P+ voltage measurement. |Voltage
+ |24 |ADC Reference N- voltage measurement. |Voltage
+ |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage
+ |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage
+ |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage
+ |28 |PS Auxiliary voltage measurement (supply6). |Voltage
+ |29 |PL VCCADC voltage measurement (vccams). |Voltage
+ |30 |Differential analog input signal voltage measurment. |Voltage
+ |31 |VUser0 voltage measurement (supply7). |Voltage
+ |32 |VUser1 voltage measurement (supply8). |Voltage
+ |33 |VUser2 voltage measurement (supply9). |Voltage
+ |34 |VUser3 voltage measurement (supply10). |Voltage
+ |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage
+ |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage
+ |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage
+ |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage
+ |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage
+ |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage
+ |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage
+ |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage
+ |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage
+ |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage
+ |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage
+ |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage
+ |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage
+ |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage
+ |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage
+ |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage
+ --------------------------------------------------------------------------------------------------------
+
+properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-ams
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ description: AMS Controller register space
+ maxItems: 1
+
+ ranges:
+ description:
+ Maps the child address space for PS and/or PL.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ '#io-channel-cells':
+ const: 1
+
+ ams-ps@0:
+ type: object
+ description: |
+ PS (Processing System) SYSMON is memory mapped to PS. This block has
+ built-in alarm generation logic that is used to interrupt the processor
+ based on condition set.
+
+ properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-ams-ps
+
+ reg:
+ description: Register Space for PS-SYSMON
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+
+ additionalProperties: false
+
+ ams-pl@400:
+ type: object
+ description:
+ PL-SYSMON is capable of monitoring off chip voltage and temperature.
+ PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+ from external master. Out of this interface currently only DRP is
+ supported. This block has alarm generation logic that is used to
+ interrupt the processor based on condition set.
+
+ properties:
+ compatible:
+ items:
+ - enum:
+ - xlnx,zynqmp-ams-pl
+
+ reg:
+ description: Register Space for PL-SYSMON.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^channel@([2-4][0-9]|50)$":
+ type: object
+ description:
+ Describes the external channels connected.
+
+ properties:
+ reg:
+ description:
+ Pair of pins the channel is connected to. This value is
+ same as Channel Number for a particular channel.
+ minimum: 20
+ maximum: 50
+
+ xlnx,bipolar:
+ $ref: /schemas/types.yaml#/definitions/flag
+ type: boolean
+ description:
+ If the set channel is used in bipolar mode.
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ xilinx_ams: ams@ffa50000 {
+ compatible = "xlnx,zynqmp-ams";
+ interrupt-parent = <&gic>;
+ interrupts = <0 56 4>;
+ reg = <0x0 0xffa50000 0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #io-channel-cells = <1>;
+ ranges = <0 0 0xffa50800 0x800>;
+
+ ams_ps: ams-ps@0 {
+ compatible = "xlnx,zynqmp-ams-ps";
+ reg = <0 0x400>;
+ };
+
+ ams_pl: ams-pl@400 {
+ compatible = "xlnx,zynqmp-ams-pl";
+ reg = <0x400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@30 {
+ reg = <30>;
+ xlnx,bipolar;
+ };
+ channel@31 {
+ reg = <31>;
+ };
+ channel@38 {
+ reg = <38>;
+ xlnx,bipolar;
+ };
+ };
+ };
+ };
--
2.17.1
next prev parent reply other threads:[~2021-12-03 21:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-03 21:23 [PATCH v12 0/5] Add Xilinx AMS Driver Anand Ashok Dumbre
2021-12-03 21:23 ` [PATCH v12 1/5] device property: Add fwnode_iomap() Anand Ashok Dumbre
2021-12-16 11:33 ` Jonathan Cameron
2021-12-17 17:52 ` Rafael J. Wysocki
2021-12-18 10:38 ` Jonathan Cameron
2021-12-21 12:30 ` Jonathan Cameron
2021-12-03 21:23 ` [PATCH v12 2/5] arm64: zynqmp: DT: Add Xilinx AMS node Anand Ashok Dumbre
2022-01-19 11:51 ` Michael Tretter
2021-12-03 21:23 ` [PATCH v12 3/5] iio: adc: Add Xilinx AMS driver Anand Ashok Dumbre
2021-12-03 21:23 ` Anand Ashok Dumbre [this message]
2021-12-03 21:23 ` [PATCH v12 5/5] MAINTAINERS: Add maintainer for xilinx-ams Anand Ashok Dumbre
2021-12-15 12:11 ` [PATCH v12 0/5] Add Xilinx AMS Driver Anand Ashok Dumbre
2021-12-16 11:37 ` Jonathan Cameron
2022-01-10 5:17 ` Anand Ashok Dumbre
2022-01-10 13:39 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211203212358.31444-5-anand.ashok.dumbre@xilinx.com \
--to=anand.ashok.dumbre@xilinx.com \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michals@xilinx.com \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.