[PATCH] dt-bindings: convert power domain node for rockchip DW MIPI DSI

[David Heidelberg <david@ixit.cz>]

Convert into YAML format into format, which can be validated.

Changes:
 - drop panel from example

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 .../display/rockchip/dw_mipi_dsi_rockchip.txt |  93 --------
 .../rockchip/rockchip,dw-mipi-dsi.yaml        | 200 ++++++++++++++++++
 2 files changed, 200 insertions(+), 93 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml

diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
deleted file mode 100644
index 39792f051d2d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Rockchip specific extensions to the Synopsys Designware MIPI DSI
-================================
-
-Required properties:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: one of
-	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
-- reg: Represent the physical address range of the controller.
-- interrupts: Represent the controller's interrupt to the CPU(s).
-- clocks, clock-names: Phandles to the controller's pll reference
-  clock(ref) when using an internal dphy and APB clock(pclk).
-  For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
-  are required. As described in [1].
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
-- ports: contain a port node with endpoint definitions as defined in [2].
-  For vopb,set the reg = <0> and set the reg = <1> for vopl.
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Optional properties:
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "dphy" if phys references an external phy.
-- #phy-cells: Defined when used as ISP phy, should be 0.
-- power-domains: a phandle to mipi dsi power domain node.
-- resets: list of phandle + reset specifier pairs, as described in [3].
-- reset-names: string reset name, must be "apb".
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/media/video-interfaces.txt
-[3] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
-	mipi_dsi: mipi@ff960000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
-		reg = <0xff960000 0x4000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
-		clock-names = "ref", "pclk";
-		resets = <&cru SRST_MIPIDSI0>;
-		reset-names = "apb";
-		rockchip,grf = <&grf>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mipi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_mipi>;
-				};
-				mipi_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_mipi>;
-				};
-			};
-
-			mipi_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_out_panel: endpoint {
-					remote-endpoint = <&panel_in_mipi>;
-				};
-			};
-		};
-
-		panel {
-			compatible ="boe,tv080wum-nl0";
-			reg = <0>;
-
-			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&lcd_en>;
-			backlight = <&backlight>;
-
-			port {
-				panel_in_mipi: endpoint {
-					remote-endpoint = <&mipi_out_panel>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..7efa201e0e51
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+  - opensource@rock-chips.com
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-mipi-dsi
+      then:
+        properties:
+          clocks:
+            maxItems: 1
+          clock-names:
+            items:
+              - const: pclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-mipi-dsi
+      then:
+        properties:
+          clocks:
+            maxItems: 2
+          clock-names:
+            items:
+              - const: ref
+              - const: pclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-mipi-dsi
+      then:
+        properties:
+          clocks:
+            minItems: 4
+            maxItems: 4
+          clock-names:
+            items:
+              - const: ref
+              - const: pclk
+              - const: phy_cfg
+              - const: grf
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,px30-mipi-dsi
+              - rockchip,rk3288-mipi-dsi
+              - rockchip,rk3399-mipi-dsi
+          - const: snps,dw-mipi-dsi
+      - items:
+          - const: rockchip,px30-mipi-dsi
+      - items:
+          - const: rockchip,rk3288-mipi-dsi
+      - items:
+          - const: rockchip,rk3399-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys:
+    maxItems: 1
+    description: The external PHY
+
+  phy-names:
+    const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: >
+          Video port for the VOP input.
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Connection to the VOPB
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Connection to the VOPL
+
+        required:
+          - endpoint@0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: >
+          Video port for panel or subsequent encoder
+
+    required:
+      - port@0
+      - port@1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: apb
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the GRF to mux vopl/vopb
+
+  power-domains: true
+
+  '#address-cells':
+    const: 1
+
+  '#phy-cells':
+    const: 0
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - rockchip,grf
+  - ports
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    mipi_dsi: mipi@ff960000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+        reg = <0xff960000 0x4000>;
+        interrupts = <0 83 4>;
+        clocks = <&cru 148>, <&cru PCLK_MIPI_DSI0>;
+        clock-names = "ref", "pclk";
+        resets = <&cru SRST_MIPIDSI0>;
+        reset-names = "apb";
+        rockchip,grf = <&grf>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_in: port@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                mipi_in_vopb: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&vopb_out_mipi>;
+                };
+                mipi_in_vopl: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&vopl_out_mipi>;
+                };
+            };
+
+            mipi_out: port@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                mipi_out_panel: endpoint {
+                    remote-endpoint = <&panel_in_mipi>;
+                };
+            };
+        };
+    };
-- 
2.33.0