All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prathamesh Shete <pshete@nvidia.com>
To: <adrian.hunter@intel.com>, <ulf.hansson@linaro.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<p.zabel@pengutronix.de>, <linux-mmc@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <pshete@nvidia.com>, <anrao@nvidia.com>, <smangipudi@nvidia.com>
Subject: [PATCH v4] mmc: sdhci-tegra: Fix switch to HS400ES mode
Date: Tue, 14 Dec 2021 17:06:53 +0530	[thread overview]
Message-ID: <20211214113653.4631-1-pshete@nvidia.com> (raw)
In-Reply-To: <3dd2473a-00ca-4c62-e17f-9392cf74cda4@intel.com>

When CMD13 is sent after switching to HS400ES mode, the bus
is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR.
To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI
interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
controller CAR clock and the interface clock are rate matched.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
---
 drivers/mmc/host/sdhci-tegra.c | 43 ++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 387ce9cdbd7c..7be6674eebd5 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -354,23 +354,6 @@ static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap)
 	}
 }
 
-static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
-					      struct mmc_ios *ios)
-{
-	struct sdhci_host *host = mmc_priv(mmc);
-	u32 val;
-
-	val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
-
-	if (ios->enhanced_strobe)
-		val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
-	else
-		val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
-
-	sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
-
-}
-
 static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -791,6 +774,32 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	}
 }
 
+static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
+					      struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u32 val;
+
+	val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
+
+	if (ios->enhanced_strobe) {
+		val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
+		/*
+		 * When CMD13 is sent from mmc_select_hs400es() after
+		 * switching to HS400ES mode, the bus is operating at
+		 * either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR.
+		 * To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI
+		 * interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
+		 * controller CAR clock and the interface clock are rate matched.
+		 */
+		tegra_sdhci_set_clock(host, MMC_HS200_MAX_DTR);
+	} else {
+		val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
+	}
+
+	sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
+}
+
 static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-- 
2.17.1


  reply	other threads:[~2021-12-14 11:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-29 11:10 [PATCH] mmc: sdhci-tegra: Add support to enumerate in HS400ES mode Prathamesh Shete
2021-12-02  6:39 ` Adrian Hunter
2021-12-02 13:49   ` [PATCH v2] mmc: sdhci-tegra: Fix switch to " Prathamesh Shete
2021-12-02 14:35     ` Adrian Hunter
2021-12-06 14:05       ` [PATCH v3] " Prathamesh Shete
2021-12-14  6:01         ` Adrian Hunter
2021-12-14 11:36           ` Prathamesh Shete [this message]
2021-12-14 12:06             ` [PATCH v4] " Adrian Hunter
2021-12-14 20:37             ` Ulf Hansson
2021-12-14 11:38           ` [PATCH v3] " Prathamesh Shete
2021-12-06 14:06       ` [PATCH v2] " Prathamesh Shete
2021-12-02 13:50   ` [PATCH] mmc: sdhci-tegra: Add support to enumerate in " Prathamesh Shete

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211214113653.4631-1-pshete@nvidia.com \
    --to=pshete@nvidia.com \
    --cc=adrian.hunter@intel.com \
    --cc=anrao@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=smangipudi@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.