From: Valentin Caron <valentin.caron@foss.st.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Gerald Baeza <gerald.baeza@st.com>, Erwan Le Ray <erwan.leray@foss.st.com>, Valentin Caron <valentin.caron@foss.st.com>, <linux-serial@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 1/4] serial: stm32: move tx dma terminate DMA to shutdown Date: Tue, 4 Jan 2022 19:24:42 +0100 [thread overview] Message-ID: <20220104182445.4195-2-valentin.caron@foss.st.com> (raw) In-Reply-To: <20220104182445.4195-1-valentin.caron@foss.st.com> Terminate DMA transaction and clear CR3_DMAT when shutdown is requested, instead of when remove is requested. If DMA transfer is not stopped in shutdown ops, driver will fail to start a new DMA transfer after next startup ops. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> --- drivers/tty/serial/stm32-usart.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 3244e7f6818c..6cfc3bec6749 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -883,6 +883,11 @@ static void stm32_usart_shutdown(struct uart_port *port) u32 val, isr; int ret; + if (stm32_port->tx_dma_busy) { + dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + } + /* Disable modem control interrupts */ stm32_usart_disable_ms(port); @@ -1570,7 +1575,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) writel_relaxed(cr3, port->membase + ofs->cr3); if (stm32_port->tx_ch) { - dmaengine_terminate_async(stm32_port->tx_ch); stm32_usart_of_dma_tx_remove(stm32_port, pdev); dma_release_channel(stm32_port->tx_ch); } -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Valentin Caron <valentin.caron@foss.st.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Gerald Baeza <gerald.baeza@st.com>, Erwan Le Ray <erwan.leray@foss.st.com>, Valentin Caron <valentin.caron@foss.st.com>, <linux-serial@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 1/4] serial: stm32: move tx dma terminate DMA to shutdown Date: Tue, 4 Jan 2022 19:24:42 +0100 [thread overview] Message-ID: <20220104182445.4195-2-valentin.caron@foss.st.com> (raw) In-Reply-To: <20220104182445.4195-1-valentin.caron@foss.st.com> Terminate DMA transaction and clear CR3_DMAT when shutdown is requested, instead of when remove is requested. If DMA transfer is not stopped in shutdown ops, driver will fail to start a new DMA transfer after next startup ops. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> --- drivers/tty/serial/stm32-usart.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 3244e7f6818c..6cfc3bec6749 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -883,6 +883,11 @@ static void stm32_usart_shutdown(struct uart_port *port) u32 val, isr; int ret; + if (stm32_port->tx_dma_busy) { + dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + } + /* Disable modem control interrupts */ stm32_usart_disable_ms(port); @@ -1570,7 +1575,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev) writel_relaxed(cr3, port->membase + ofs->cr3); if (stm32_port->tx_ch) { - dmaengine_terminate_async(stm32_port->tx_ch); stm32_usart_of_dma_tx_remove(stm32_port, pdev); dma_release_channel(stm32_port->tx_ch); } -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-04 18:26 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-04 18:24 [PATCH 0/4] Add improvements for STM32 USART DMA TX Valentin Caron 2022-01-04 18:24 ` Valentin Caron 2022-01-04 18:24 ` Valentin Caron [this message] 2022-01-04 18:24 ` [PATCH 1/4] serial: stm32: move tx dma terminate DMA to shutdown Valentin Caron 2022-01-04 18:24 ` [PATCH 2/4] serial: stm32: rework TX DMA state condition Valentin Caron 2022-01-04 18:24 ` Valentin Caron 2022-01-04 18:24 ` [PATCH 3/4] serial: stm32: fix flow control transfer in DMA mode Valentin Caron 2022-01-04 18:24 ` Valentin Caron 2022-01-04 18:24 ` [PATCH 4/4] serial: stm32: correct loop for dma error handling Valentin Caron 2022-01-04 18:24 ` Valentin Caron
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220104182445.4195-2-valentin.caron@foss.st.com \ --to=valentin.caron@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=erwan.leray@foss.st.com \ --cc=gerald.baeza@st.com \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.