From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v8 6/7] ARM: dts: imx: Add i.MXRT1050-EVK support Date: Tue, 11 Jan 2022 16:54:14 -0500 [thread overview] Message-ID: <20220111215415.2075257-7-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20220111215415.2075257-1-Mr.Bossman075@gmail.com> From: Giulio Benetti <giulio.benetti@benettiengineering.com> The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MXRT, which features NXP's implementation of the Arm Cortex-M7 core. The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket, USB 2.0 OTG. This patch aims to support the preliminary booting up features as follows: GPIO LPUART SD/MMC Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> [Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl] --- V1->V2: * dtsi: Add clock parent definitions * dtsi: Change hex values to lowercase * dtsi: Move anatop definition from driver * dts: Remove unused pin controll (semc) * dts: Use moved pin controll header * Move aliases from dtsi to dts * Change commit description * Change licence to "GPL-2.0+ OR MIT" V2->V3: * Remove bootargs, comments, unused container * Remove unnecessary new lines * Rename imxrt to imxrt1050 for seiral and mmc * GPT uses own clock * fix memory@0 * Change GPT compatible handles V3->V4: * Remove "fsl,imx-osc" * Add space on serial compatible * Change "iomuxc@" to "pinctrl@" * Change "ccm@" to "clock-controller@" * Change "fsl,imxrt-gpio" to "fsl,imxrt1050-gpio" V4->V5: * Nothing done V5->V6: * Nothing done V6->V7: * Add fixed clock for GPT * Fix lpuart compatible * Add usdhc compatible V7->V8: * Nothing done --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imxrt1050-evk.dts | 72 +++++++++++++ arch/arm/boot/dts/imxrt1050.dtsi | 160 ++++++++++++++++++++++++++++ 3 files changed, 234 insertions(+) create mode 100644 arch/arm/boot/dts/imxrt1050-evk.dts create mode 100644 arch/arm/boot/dts/imxrt1050.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..07acd6189cae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -723,6 +723,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_SOC_IMXRT) += \ + imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts new file mode 100644 index 000000000000..6a9c10decf52 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000000..77b911b06041 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v8 6/7] ARM: dts: imx: Add i.MXRT1050-EVK support Date: Tue, 11 Jan 2022 16:54:14 -0500 [thread overview] Message-ID: <20220111215415.2075257-7-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20220111215415.2075257-1-Mr.Bossman075@gmail.com> From: Giulio Benetti <giulio.benetti@benettiengineering.com> The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MXRT, which features NXP's implementation of the Arm Cortex-M7 core. The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket, USB 2.0 OTG. This patch aims to support the preliminary booting up features as follows: GPIO LPUART SD/MMC Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> [Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl] --- V1->V2: * dtsi: Add clock parent definitions * dtsi: Change hex values to lowercase * dtsi: Move anatop definition from driver * dts: Remove unused pin controll (semc) * dts: Use moved pin controll header * Move aliases from dtsi to dts * Change commit description * Change licence to "GPL-2.0+ OR MIT" V2->V3: * Remove bootargs, comments, unused container * Remove unnecessary new lines * Rename imxrt to imxrt1050 for seiral and mmc * GPT uses own clock * fix memory@0 * Change GPT compatible handles V3->V4: * Remove "fsl,imx-osc" * Add space on serial compatible * Change "iomuxc@" to "pinctrl@" * Change "ccm@" to "clock-controller@" * Change "fsl,imxrt-gpio" to "fsl,imxrt1050-gpio" V4->V5: * Nothing done V5->V6: * Nothing done V6->V7: * Add fixed clock for GPT * Fix lpuart compatible * Add usdhc compatible V7->V8: * Nothing done --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imxrt1050-evk.dts | 72 +++++++++++++ arch/arm/boot/dts/imxrt1050.dtsi | 160 ++++++++++++++++++++++++++++ 3 files changed, 234 insertions(+) create mode 100644 arch/arm/boot/dts/imxrt1050-evk.dts create mode 100644 arch/arm/boot/dts/imxrt1050.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..07acd6189cae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -723,6 +723,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_SOC_IMXRT) += \ + imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts new file mode 100644 index 000000000000..6a9c10decf52 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000000..77b911b06041 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-11 21:54 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-11 21:25 [PATCH v7 0/7] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2022-01-11 21:25 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 1/7] ARM: imx: Add initial support for i.MXRT10xx family Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 2/7] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 3/7] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 4/7] dt-bindings: clock: imx: Add documentation for i.MXRT1050 clock Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 5/7] clk: imx: Add initial support for i.MXRT1050 clock driver Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 6/7] ARM: dts: imx: Add i.MXRT1050-EVK support Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:26 ` [PATCH v7 7/7] ARM: imxrt_defconfig: Add i.MXRT family defconfig Jesse Taube 2022-01-11 21:26 ` Jesse Taube 2022-01-11 21:54 ` [PATCH v8 0/7] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-11 21:54 ` [PATCH v8 1/7] ARM: imx: Add initial support for i.MXRT10xx family Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-28 9:47 ` Shawn Guo 2022-01-28 9:47 ` Shawn Guo 2022-01-11 21:54 ` [PATCH v8 2/7] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-19 14:05 ` Rob Herring 2022-01-19 14:05 ` Rob Herring 2022-01-28 9:49 ` Shawn Guo 2022-01-28 9:49 ` Shawn Guo 2022-01-11 21:54 ` [PATCH v8 3/7] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-12 2:57 ` Stephen Boyd 2022-01-12 2:57 ` Stephen Boyd 2022-01-18 10:16 ` Abel Vesa 2022-01-18 10:16 ` Abel Vesa 2022-01-11 21:54 ` [PATCH v8 4/7] dt-bindings: clock: imx: Add documentation for i.MXRT1050 clock Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-12 2:57 ` Stephen Boyd 2022-01-12 2:57 ` Stephen Boyd 2022-01-18 10:16 ` Abel Vesa 2022-01-18 10:16 ` Abel Vesa 2022-01-11 21:54 ` [PATCH v8 5/7] clk: imx: Add initial support for i.MXRT1050 clock driver Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-12 2:57 ` Stephen Boyd 2022-01-12 2:57 ` Stephen Boyd 2022-01-18 10:17 ` Abel Vesa 2022-01-18 10:17 ` Abel Vesa 2022-01-11 21:54 ` Jesse Taube [this message] 2022-01-11 21:54 ` [PATCH v8 6/7] ARM: dts: imx: Add i.MXRT1050-EVK support Jesse Taube 2022-01-28 11:58 ` Shawn Guo 2022-01-28 11:58 ` Shawn Guo 2022-01-11 21:54 ` [PATCH v8 7/7] ARM: imxrt_defconfig: Add i.MXRT family defconfig Jesse Taube 2022-01-11 21:54 ` Jesse Taube 2022-01-28 11:59 ` Shawn Guo 2022-01-28 11:59 ` Shawn Guo 2022-01-11 21:57 ` [PATCH v7 0/7] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2022-01-11 21:57 ` Jesse Taube
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220111215415.2075257-7-Mr.Bossman075@gmail.com \ --to=mr.bossman075@gmail.com \ --cc=abel.vesa@nxp.com \ --cc=adrian.hunter@intel.com \ --cc=aisheng.dong@nxp.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=giulio.benetti@benettiengineering.com \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mturquette@baylibre.com \ --cc=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.