From: Sam Protsenko <semen.protsenko@linaro.org> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Tomasz Figa <tomasz.figa@gmail.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Linus Walleij <linus.walleij@linaro.org>, Chanho Park <chanho61.park@samsung.com>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios Date: Fri, 14 Jan 2022 22:37:57 +0200 [thread overview] Message-ID: <20220114203757.4860-1-semen.protsenko@linaro.org> (raw) GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT capabilities (like EINT_SVC register), and there are no corresponding interrupts wired to GIC. Instead those blocks have wake-up interrupts for each pin. The ".eint_gpio_init" callbacks were specified by mistake for these blocks, when porting pinctrl code from downstream kernel. That leads to error messages like this: samsung-pinctrl 11850000.pinctrl: irq number not available Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this error. This change doesn't affect proper interrupt handling for related pins, as all those pins are handled in ".eint_wkup_init". Fixes: cdd3d945dcec ("pinctrl: samsung: Add Exynos850 SoC specific data") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index 2e490e7696f4..4102ce955bd7 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -585,13 +585,11 @@ static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = { /* pin-controller instance 0 ALIVE data */ .pin_banks = exynos850_pin_banks0, .nr_banks = ARRAY_SIZE(exynos850_pin_banks0), - .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, }, { /* pin-controller instance 1 CMGP data */ .pin_banks = exynos850_pin_banks1, .nr_banks = ARRAY_SIZE(exynos850_pin_banks1), - .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, }, { /* pin-controller instance 2 AUD data */ -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Sam Protsenko <semen.protsenko@linaro.org> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Tomasz Figa <tomasz.figa@gmail.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Linus Walleij <linus.walleij@linaro.org>, Chanho Park <chanho61.park@samsung.com>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios Date: Fri, 14 Jan 2022 22:37:57 +0200 [thread overview] Message-ID: <20220114203757.4860-1-semen.protsenko@linaro.org> (raw) GPIO_ALIVE and GPIO_CMGP blocks in Exynos850 SoC don't have EINT capabilities (like EINT_SVC register), and there are no corresponding interrupts wired to GIC. Instead those blocks have wake-up interrupts for each pin. The ".eint_gpio_init" callbacks were specified by mistake for these blocks, when porting pinctrl code from downstream kernel. That leads to error messages like this: samsung-pinctrl 11850000.pinctrl: irq number not available Remove ".eint_gpio_init" for pinctrl_alive and pinctrl_gpmc to fix this error. This change doesn't affect proper interrupt handling for related pins, as all those pins are handled in ".eint_wkup_init". Fixes: cdd3d945dcec ("pinctrl: samsung: Add Exynos850 SoC specific data") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index 2e490e7696f4..4102ce955bd7 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -585,13 +585,11 @@ static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = { /* pin-controller instance 0 ALIVE data */ .pin_banks = exynos850_pin_banks0, .nr_banks = ARRAY_SIZE(exynos850_pin_banks0), - .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, }, { /* pin-controller instance 1 CMGP data */ .pin_banks = exynos850_pin_banks1, .nr_banks = ARRAY_SIZE(exynos850_pin_banks1), - .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, }, { /* pin-controller instance 2 AUD data */ -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-01-14 20:38 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-14 20:37 Sam Protsenko [this message] 2022-01-14 20:37 ` [PATCH] pinctrl: samsung: Remove EINT handler for Exynos850 ALIVE and CMGP gpios Sam Protsenko 2022-01-23 11:46 ` Krzysztof Kozlowski 2022-01-23 11:46 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220114203757.4860-1-semen.protsenko@linaro.org \ --to=semen.protsenko@linaro.org \ --cc=chanho61.park@samsung.com \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.