All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair.francis@opensource.wdc.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, LIU Zhiwei <zhiwei_liu@c-sky.com>,
	Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 43/61] target/riscv: Create xl field in env
Date: Fri, 21 Jan 2022 15:58:12 +1000	[thread overview]
Message-ID: <20220121055830.3164408-44-alistair.francis@opensource.wdc.com> (raw)
In-Reply-To: <20220121055830.3164408-1-alistair.francis@opensource.wdc.com>

From: LIU Zhiwei <zhiwei_liu@c-sky.com>

Current xlen has been used in helper functions and many other places.
The computation of current xlen is not so trivial, so that we should
recompute it as little as possible.

Fortunately, xlen only changes in very seldom cases, such as exception,
misa write, mstatus write, cpu reset, migration load. So that we can only
recompute xlen in this places and cache it into CPURISCVState.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220120122050.41546-6-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
 target/riscv/cpu.h        | 31 +++++++++++++++++++++++++++++++
 target/riscv/cpu.c        |  1 +
 target/riscv/cpu_helper.c | 34 ++--------------------------------
 target/riscv/csr.c        |  2 ++
 target/riscv/machine.c    | 10 ++++++++++
 5 files changed, 46 insertions(+), 32 deletions(-)

diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 03552f4aaa..7657e22a56 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -146,6 +146,7 @@ struct CPURISCVState {
     uint32_t misa_mxl_max;  /* max mxl for this cpu */
     uint32_t misa_ext;      /* current extensions */
     uint32_t misa_ext_mask; /* max ext for this cpu */
+    uint32_t xl;            /* current xlen */
 
     /* 128-bit helpers upper part return value */
     target_ulong retxh;
@@ -456,6 +457,36 @@ static inline RISCVMXL riscv_cpu_mxl(CPURISCVState *env)
 }
 #endif
 
+#if defined(TARGET_RISCV32)
+#define cpu_recompute_xl(env)  ((void)(env), MXL_RV32)
+#else
+static inline RISCVMXL cpu_recompute_xl(CPURISCVState *env)
+{
+    RISCVMXL xl = env->misa_mxl;
+#if !defined(CONFIG_USER_ONLY)
+    /*
+     * When emulating a 32-bit-only cpu, use RV32.
+     * When emulating a 64-bit cpu, and MXL has been reduced to RV32,
+     * MSTATUSH doesn't have UXL/SXL, therefore XLEN cannot be widened
+     * back to RV64 for lower privs.
+     */
+    if (xl != MXL_RV32) {
+        switch (env->priv) {
+        case PRV_M:
+            break;
+        case PRV_U:
+            xl = get_field(env->mstatus, MSTATUS64_UXL);
+            break;
+        default: /* PRV_S | PRV_H */
+            xl = get_field(env->mstatus, MSTATUS64_SXL);
+            break;
+        }
+    }
+#endif
+    return xl;
+}
+#endif
+
 /*
  * Encode LMUL to lmul as follows:
  *     LMUL    vlmul    lmul
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index c2b570e904..736cf1d4e7 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -413,6 +413,7 @@ static void riscv_cpu_reset(DeviceState *dev)
     /* mmte is supposed to have pm.current hardwired to 1 */
     env->mmte |= (PM_EXT_INITIAL | MMTE_M_PM_CURRENT);
 #endif
+    env->xl = riscv_cpu_mxl(env);
     cs->exception_index = RISCV_EXCP_NONE;
     env->load_res = -1;
     set_default_nan_mode(1, &env->fp_status);
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index afee770951..8ebcd57af0 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -35,37 +35,6 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch)
 #endif
 }
 
-static RISCVMXL cpu_get_xl(CPURISCVState *env)
-{
-#if defined(TARGET_RISCV32)
-    return MXL_RV32;
-#elif defined(CONFIG_USER_ONLY)
-    return MXL_RV64;
-#else
-    RISCVMXL xl = riscv_cpu_mxl(env);
-
-    /*
-     * When emulating a 32-bit-only cpu, use RV32.
-     * When emulating a 64-bit cpu, and MXL has been reduced to RV32,
-     * MSTATUSH doesn't have UXL/SXL, therefore XLEN cannot be widened
-     * back to RV64 for lower privs.
-     */
-    if (xl != MXL_RV32) {
-        switch (env->priv) {
-        case PRV_M:
-            break;
-        case PRV_U:
-            xl = get_field(env->mstatus, MSTATUS64_UXL);
-            break;
-        default: /* PRV_S | PRV_H */
-            xl = get_field(env->mstatus, MSTATUS64_SXL);
-            break;
-        }
-    }
-    return xl;
-#endif
-}
-
 void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc,
                           target_ulong *cs_base, uint32_t *pflags)
 {
@@ -148,7 +117,7 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc,
     }
 #endif
 
-    flags = FIELD_DP32(flags, TB_FLAGS, XL, cpu_get_xl(env));
+    flags = FIELD_DP32(flags, TB_FLAGS, XL, env->xl);
 
     *pflags = flags;
 }
@@ -364,6 +333,7 @@ void riscv_cpu_set_mode(CPURISCVState *env, target_ulong newpriv)
     }
     /* tlb_flush is unnecessary as mode is contained in mmu_idx */
     env->priv = newpriv;
+    env->xl = cpu_recompute_xl(env);
 
     /*
      * Clear the load reservation - otherwise a reservation placed in one
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 6bc7ee780c..9be2820d2b 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -589,6 +589,7 @@ static RISCVException write_mstatus(CPURISCVState *env, int csrno,
         mstatus = set_field(mstatus, MSTATUS64_UXL, xl);
     }
     env->mstatus = mstatus;
+    env->xl = cpu_recompute_xl(env);
 
     return RISCV_EXCP_NONE;
 }
@@ -704,6 +705,7 @@ static RISCVException write_misa(CPURISCVState *env, int csrno,
     /* flush translation cache */
     tb_flush(env_cpu(env));
     env->misa_ext = val;
+    env->xl = riscv_cpu_mxl(env);
     return RISCV_EXCP_NONE;
 }
 
diff --git a/target/riscv/machine.c b/target/riscv/machine.c
index 098670e680..b76e4db99c 100644
--- a/target/riscv/machine.c
+++ b/target/riscv/machine.c
@@ -214,10 +214,20 @@ static const VMStateDescription vmstate_kvmtimer = {
     }
 };
 
+static int riscv_cpu_post_load(void *opaque, int version_id)
+{
+    RISCVCPU *cpu = opaque;
+    CPURISCVState *env = &cpu->env;
+
+    env->xl = cpu_recompute_xl(env);
+    return 0;
+}
+
 const VMStateDescription vmstate_riscv_cpu = {
     .name = "cpu",
     .version_id = 3,
     .minimum_version_id = 3,
+    .post_load = riscv_cpu_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINTTL_ARRAY(env.gpr, RISCVCPU, 32),
         VMSTATE_UINT64_ARRAY(env.fpr, RISCVCPU, 32),
-- 
2.31.1



  parent reply	other threads:[~2022-01-21  8:34 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-21  5:57 [PULL 00/61] riscv-to-apply queue Alistair Francis
2022-01-21  5:57 ` [PULL 01/61] hw: timer: ibex_timer: Fixup reading w/o register Alistair Francis
2022-01-21  5:57 ` [PULL 02/61] riscv: opentitan: fixup plic stride len Alistair Francis
2022-01-21  5:57 ` [PULL 03/61] hw: timer: ibex_timer: update/add reg address Alistair Francis
2022-01-21  5:57 ` [PULL 04/61] update-linux-headers: Add asm-riscv/kvm.h Alistair Francis
2022-01-21  5:57 ` [PULL 05/61] target/riscv: Add target/riscv/kvm.c to place the public kvm interface Alistair Francis
2022-01-21  5:57 ` [PULL 06/61] target/riscv: Implement function kvm_arch_init_vcpu Alistair Francis
2022-01-21  5:57 ` [PULL 07/61] target/riscv: Implement kvm_arch_get_registers Alistair Francis
2022-01-21  5:57 ` [PULL 08/61] target/riscv: Implement kvm_arch_put_registers Alistair Francis
2022-01-21  5:57 ` [PULL 09/61] target/riscv: Support start kernel directly by KVM Alistair Francis
2022-01-21  5:57 ` [PULL 10/61] target/riscv: Support setting external interrupt " Alistair Francis
2022-01-21  5:57 ` [PULL 11/61] target/riscv: Handle KVM_EXIT_RISCV_SBI exit Alistair Francis
2022-01-21  5:57 ` [PULL 12/61] target/riscv: Add host cpu type Alistair Francis
2022-01-21  5:57 ` [PULL 13/61] target/riscv: Add kvm_riscv_get/put_regs_timer Alistair Francis
2022-01-21  5:57 ` [PULL 14/61] target/riscv: Implement virtual time adjusting with vm state changing Alistair Francis
2022-01-21  5:57 ` [PULL 15/61] target/riscv: Support virtual time context synchronization Alistair Francis
2022-01-21  5:57 ` [PULL 16/61] target/riscv: enable riscv kvm accel Alistair Francis
2022-01-21  5:57 ` [PULL 17/61] softmmu/device_tree: Silence compiler warning with --enable-sanitizers Alistair Francis
2022-01-21  5:57 ` [PULL 18/61] softmmu/device_tree: Remove redundant pointer assignment Alistair Francis
2022-01-21  5:57 ` [PULL 19/61] target/riscv: rvv-1.0: Add Zve64f extension into RISC-V Alistair Francis
2022-01-21  5:57 ` [PULL 20/61] target/riscv: rvv-1.0: Add Zve64f support for configuration insns Alistair Francis
2022-01-21  5:57 ` [PULL 21/61] target/riscv: rvv-1.0: Add Zve64f support for load and store insns Alistair Francis
2022-01-21  5:57 ` [PULL 22/61] target/riscv: rvv-1.0: Add Zve64f support for vmulh variant insns Alistair Francis
2022-01-21  5:57 ` [PULL 23/61] target/riscv: rvv-1.0: Add Zve64f support for vsmul.vv and vsmul.vx insns Alistair Francis
2022-01-21  5:57 ` [PULL 24/61] target/riscv: rvv-1.0: Add Zve64f support for scalar fp insns Alistair Francis
2022-01-21  5:57 ` [PULL 25/61] target/riscv: rvv-1.0: Add Zve64f support for single-width fp reduction insns Alistair Francis
2022-01-21  5:57 ` [PULL 26/61] target/riscv: rvv-1.0: Add Zve64f support for widening type-convert insns Alistair Francis
2022-01-21  5:57 ` [PULL 27/61] target/riscv: rvv-1.0: Add Zve64f support for narrowing " Alistair Francis
2022-01-21  5:57 ` [PULL 28/61] target/riscv: rvv-1.0: Allow Zve64f extension to be turned on Alistair Francis
2022-01-21  5:57 ` [PULL 29/61] target/riscv: rvv-1.0: Add Zve32f extension into RISC-V Alistair Francis
2022-01-21  5:57 ` [PULL 30/61] target/riscv: rvv-1.0: Add Zve32f support for configuration insns Alistair Francis
2022-01-21  5:58 ` [PULL 31/61] target/riscv: rvv-1.0: Add Zve32f support for scalar fp insns Alistair Francis
2022-01-21  5:58 ` [PULL 32/61] target/riscv: rvv-1.0: Add Zve32f support for single-width fp reduction insns Alistair Francis
2022-01-21  5:58 ` [PULL 33/61] target/riscv: rvv-1.0: Add Zve32f support for widening type-convert insns Alistair Francis
2022-01-21  5:58 ` [PULL 34/61] target/riscv: rvv-1.0: Add Zve32f support for narrowing " Alistair Francis
2022-01-21  5:58 ` [PULL 35/61] target/riscv: rvv-1.0: Allow Zve32f extension to be turned on Alistair Francis
2022-01-21  5:58 ` [PULL 36/61] hw/riscv: spike: Allow using binary firmware as bios Alistair Francis
2022-01-21  5:58 ` [PULL 37/61] hw/riscv: Remove macros for ELF BIOS image names Alistair Francis
2022-01-21  5:58 ` [PULL 38/61] roms/opensbi: Remove ELF images Alistair Francis
2022-01-21  5:58 ` [PULL 39/61] target/riscv: Adjust pmpcfg access with mxl Alistair Francis
2022-01-21  5:58 ` [PULL 40/61] target/riscv: Don't save pc when exception return Alistair Francis
2022-01-21  5:58 ` [PULL 41/61] target/riscv: Sign extend link reg for jal and jalr Alistair Francis
2022-01-21  5:58 ` [PULL 42/61] target/riscv: Sign extend pc for different XLEN Alistair Francis
2022-01-21  5:58 ` Alistair Francis [this message]
2022-01-21  5:58 ` [PULL 44/61] target/riscv: Ignore the pc bits above XLEN Alistair Francis
2022-01-21  5:58 ` [PULL 45/61] target/riscv: Extend pc for runtime pc write Alistair Francis
2022-01-21  5:58 ` [PULL 46/61] target/riscv: Use gdb xml according to max mxlen Alistair Francis
2022-01-21  5:58 ` [PULL 47/61] target/riscv: Relax debug check for pm write Alistair Francis
2022-01-21  5:58 ` [PULL 48/61] target/riscv: Adjust csr write mask with XLEN Alistair Francis
2022-01-21  5:58 ` [PULL 49/61] target/riscv: Create current pm fields in env Alistair Francis
2022-01-21  5:58 ` [PULL 50/61] target/riscv: Alloc tcg global for cur_pm[mask|base] Alistair Francis
2022-01-21  5:58 ` [PULL 51/61] target/riscv: Calculate address according to XLEN Alistair Francis
2022-01-21  5:58 ` [PULL 52/61] target/riscv: Split pm_enabled into mask and base Alistair Francis
2022-01-21  5:58 ` [PULL 53/61] target/riscv: Split out the vill from vtype Alistair Francis
2022-01-28 16:10   ` Peter Maydell
2022-02-01  2:12     ` Alistair Francis
2022-02-01  6:47       ` LIU Zhiwei
2022-01-21  5:58 ` [PULL 54/61] target/riscv: Adjust vsetvl according to XLEN Alistair Francis
2022-01-21  5:58 ` [PULL 55/61] target/riscv: Remove VILL field in VTYPE Alistair Francis
2022-01-21  5:58 ` [PULL 56/61] target/riscv: Fix check range for first fault only Alistair Francis
2022-01-21  5:58 ` [PULL 57/61] target/riscv: Adjust vector address with mask Alistair Francis
2022-01-21  5:58 ` [PULL 58/61] target/riscv: Adjust scalar reg in vector with XLEN Alistair Francis
2022-01-21  5:58 ` [PULL 59/61] target/riscv: Set default XLEN for hypervisor Alistair Francis
2022-01-21  5:58 ` [PULL 60/61] target/riscv: Enable uxl field write Alistair Francis
2022-01-21  5:58 ` [PULL 61/61] target/riscv: Relax UXL field for debugging Alistair Francis
2022-01-21 12:58 ` [PULL 00/61] riscv-to-apply queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220121055830.3164408-44-alistair.francis@opensource.wdc.com \
    --to=alistair.francis@opensource.wdc.com \
    --cc=alistair.francis@wdc.com \
    --cc=alistair23@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=zhiwei_liu@c-sky.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.