From: Chris Morgan <macroalpha82@gmail.com> To: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org, thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie, daniel@ffwll.ch, robh+dt@kernel.org, mchehab@kernel.org, emma@anholt.net, mripard@kernel.org, linux-media@vger.kernel.org, Chris Morgan <macromorgan@hotmail.com> Subject: [PATCH 4/6 v2] dt-bindings: display: simple: add Geekworm MZP280 Panel Date: Mon, 24 Jan 2022 10:55:24 -0600 [thread overview] Message-ID: <20220124165526.1104-5-macroalpha82@gmail.com> (raw) In-Reply-To: <20220124165526.1104-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> The Geekworm MZP280 panel is a 480x640 (portrait) panel with a capacitive touch interface and a 40 pin header meant to interface directly with the Raspberry Pi. The screen is 2.8 inches diagonally, and there appear to be at least 4 distinct versions all with the same panel timings. Timings were derived from drivers posted on the github located here: https://github.com/tianyoujian/MZDPI/tree/master/vga Additional details about this panel family can be found here: https://wiki.geekworm.com/2.8_inch_Touch_Screen_for_Pi_zero Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 62f5f050c..3d03d8276 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -148,6 +148,8 @@ properties: - frida,frd350h54004 # FriendlyELEC HD702E 800x1280 LCD panel - friendlyarm,hd702e + # Geekworm MZP280 2.8" 480x640 LCD panel with capacitive touch + - geekworm,mzp280 # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel - giantplus,gpg48273qs5 # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com> To: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org, Chris Morgan <macromorgan@hotmail.com>, emma@anholt.net, airlied@linux.ie, robh+dt@kernel.org, thierry.reding@gmail.com, mchehab@kernel.org, sam@ravnborg.org, linux-media@vger.kernel.org Subject: [PATCH 4/6 v2] dt-bindings: display: simple: add Geekworm MZP280 Panel Date: Mon, 24 Jan 2022 10:55:24 -0600 [thread overview] Message-ID: <20220124165526.1104-5-macroalpha82@gmail.com> (raw) In-Reply-To: <20220124165526.1104-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> The Geekworm MZP280 panel is a 480x640 (portrait) panel with a capacitive touch interface and a 40 pin header meant to interface directly with the Raspberry Pi. The screen is 2.8 inches diagonally, and there appear to be at least 4 distinct versions all with the same panel timings. Timings were derived from drivers posted on the github located here: https://github.com/tianyoujian/MZDPI/tree/master/vga Additional details about this panel family can be found here: https://wiki.geekworm.com/2.8_inch_Touch_Screen_for_Pi_zero Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 62f5f050c..3d03d8276 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -148,6 +148,8 @@ properties: - frida,frd350h54004 # FriendlyELEC HD702E 800x1280 LCD panel - friendlyarm,hd702e + # Geekworm MZP280 2.8" 480x640 LCD panel with capacitive touch + - geekworm,mzp280 # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel - giantplus,gpg48273qs5 # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel -- 2.25.1
next prev parent reply other threads:[~2022-01-24 16:55 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-24 16:55 [PATCH 0/6 v2] Support Geekworm MZP280 Panel for Raspberry Pi Chris Morgan 2022-01-24 16:55 ` Chris Morgan 2022-01-24 16:55 ` [PATCH 1/6 v2] dt-bindings: vendor-prefixes: Add Geekworm Chris Morgan 2022-01-24 16:55 ` Chris Morgan 2022-02-07 22:58 ` Rob Herring 2022-02-07 22:58 ` Rob Herring 2022-01-24 16:55 ` [PATCH 2/6 v2] media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI Chris Morgan 2022-01-24 16:55 ` Chris Morgan 2022-01-24 16:55 ` [PATCH 3/6 v2] media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI Chris Morgan 2022-01-24 16:55 ` Chris Morgan 2022-01-24 16:55 ` Chris Morgan [this message] 2022-01-24 16:55 ` [PATCH 4/6 v2] dt-bindings: display: simple: add Geekworm MZP280 Panel Chris Morgan 2022-02-07 22:58 ` Rob Herring 2022-02-07 22:58 ` Rob Herring 2022-01-24 16:55 ` [PATCH 5/6 v2] drm/panel: " Chris Morgan 2022-01-24 16:55 ` Chris Morgan 2022-01-24 16:55 ` [PATCH 6/6 v2] drm/vc4: dpi: Support DPI interface in mode3 for RGB565 Chris Morgan 2022-01-24 16:55 ` Chris Morgan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220124165526.1104-5-macroalpha82@gmail.com \ --to=macroalpha82@gmail.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=emma@anholt.net \ --cc=linux-media@vger.kernel.org \ --cc=macromorgan@hotmail.com \ --cc=mchehab@kernel.org \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.