All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexey Sheplyakov <asheplyakov@basealt.ru>
To: netdev@vger.kernel.org
Cc: Alexey Sheplyakov <asheplyakov@basealt.ru>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH v2 1/2] net: stmmac: added Baikal-T1/M SoCs glue layer
Date: Fri, 28 Jan 2022 16:16:15 +0400	[thread overview]
Message-ID: <20220128121616.1463317-1-asheplyakov@basealt.ru> (raw)
In-Reply-To: <20220126170042.17ae0ad8@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net>

The gigabit Ethernet controller available in Baikal-T1 and Baikal-M
SoCs is a Synopsys DesignWare MAC IP core, already supported by
the stmmac driver.

This patch implements some SoC specific operations (DMA reset and
speed fixup) necessary for Baikal-T1/M variants.

Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Signed-off-by: Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-baikal.c    | 198 ++++++++++++++++++
 .../ethernet/stmicro/stmmac/dwmac1000_core.c  |   1 +
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |  46 ++--
 .../ethernet/stmicro/stmmac/dwmac1000_dma.h   |  26 +++
 .../net/ethernet/stmicro/stmmac/dwmac_lib.c   |   8 +
 7 files changed, 273 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-baikal.c
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.h

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 929cfc22cd0c..d8e6dcb98e6c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -66,6 +66,17 @@ config DWMAC_ANARION
 
 	  This selects the Anarion SoC glue layer support for the stmmac driver.
 
+config DWMAC_BAIKAL
+	tristate "Baikal Electronics GMAC support"
+	default MIPS_BAIKAL_T1
+	depends on OF && (MIPS || ARM64 || COMPILE_TEST)
+	help
+	  Support for gigabit ethernet controller on Baikal Electronics SoCs.
+
+	  This selects the Baikal Electronics SoCs glue layer support for
+	  the stmmac driver. This driver is used for Baikal-T1 and Baikal-M
+	  SoCs gigabit ethernet controller.
+
 config DWMAC_INGENIC
 	tristate "Ingenic MAC support"
 	default MACH_INGENIC
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index d4e12e9ace4f..ad138062e199 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -14,6 +14,7 @@ stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
 # Ordering matters. Generic driver must be last.
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
 obj-$(CONFIG_DWMAC_ANARION)	+= dwmac-anarion.o
+obj-$(CONFIG_DWMAC_BAIKAL)	+= dwmac-baikal.o
 obj-$(CONFIG_DWMAC_INGENIC)	+= dwmac-ingenic.o
 obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-baikal.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-baikal.c
new file mode 100644
index 000000000000..c5e6169eed65
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-baikal.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Baikal-T1/M SoCs DWMAC glue layer
+ *
+ * Copyright (C) 2015,2016,2021 Baikal Electronics JSC
+ * Copyright (C) 2020-2022 BaseALT Ltd
+ * Authors: Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
+ *          Alexey Sheplyakov <asheplyakov@basealt.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "stmmac.h"
+#include "stmmac_platform.h"
+#include "common.h"
+#include "dwmac_dma.h"
+#include "dwmac1000_dma.h"
+
+#define MAC_GPIO	0x00e0	/* GPIO register */
+#define MAC_GPIO_GPO	BIT(8)	/* Output port */
+
+struct baikal_dwmac {
+	struct device	*dev;
+	struct clk	*tx2_clk;
+};
+
+static int baikal_dwmac_dma_reset(void __iomem *ioaddr)
+{
+	u32 value;
+
+	/* DMA SW reset */
+	value = readl(ioaddr + DMA_BUS_MODE);
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	usleep_range(100, 120);
+
+	/* Clear PHY reset */
+	value = readl(ioaddr + MAC_GPIO);
+	value |= MAC_GPIO_GPO;
+	writel(value, ioaddr + MAC_GPIO);
+
+	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
+				  !(value & DMA_BUS_MODE_SFT_RESET),
+				  10000, 1000000);
+}
+
+static const struct stmmac_dma_ops baikal_dwmac_dma_ops = {
+	.reset = baikal_dwmac_dma_reset,
+	.init = dwmac1000_dma_init,
+	.init_rx_chan = dwmac1000_dma_init_rx,
+	.init_tx_chan = dwmac1000_dma_init_tx,
+	.axi = dwmac1000_dma_axi,
+	.dump_regs = dwmac1000_dump_dma_regs,
+	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
+	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
+	.get_hw_feature = dwmac1000_get_hw_feature,
+	.rx_watchdog = dwmac1000_rx_watchdog
+};
+
+static struct mac_device_info *baikal_dwmac_setup(void *ppriv)
+{
+	struct mac_device_info *mac;
+	struct stmmac_priv *priv = ppriv;
+	int ret;
+	u32 value;
+
+	mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+	if (!mac)
+		return NULL;
+
+	/* Clear PHY reset */
+	value = readl(priv->ioaddr + MAC_GPIO);
+	value |= MAC_GPIO_GPO;
+	writel(value, priv->ioaddr + MAC_GPIO);
+
+	mac->dma = &baikal_dwmac_dma_ops;
+	priv->hw = mac;
+	ret = dwmac1000_setup(priv);
+	if (ret) {
+		dev_err(priv->device, "dwmac1000_setup: error %d", ret);
+		return NULL;
+	}
+
+	return mac;
+}
+
+static void baikal_dwmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct baikal_dwmac *dwmac = priv;
+	unsigned long tx2_clk_freq;
+
+	switch (speed) {
+	case SPEED_1000:
+		tx2_clk_freq = 250000000;
+		break;
+	case SPEED_100:
+		tx2_clk_freq = 50000000;
+		break;
+	case SPEED_10:
+		tx2_clk_freq = 5000000;
+		break;
+	default:
+		dev_warn(dwmac->dev, "invalid speed: %u\n", speed);
+		return;
+	}
+	dev_dbg(dwmac->dev, "speed %u, setting TX2 clock frequency to %lu\n",
+		speed, tx2_clk_freq);
+	clk_set_rate(dwmac->tx2_clk, tx2_clk_freq);
+}
+
+static int dwmac_baikal_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct baikal_dwmac *dwmac;
+	int ret;
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "no suitable DMA available\n");
+		return ret;
+	}
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat)) {
+		dev_err(&pdev->dev, "dt configuration failed\n");
+		return PTR_ERR(plat_dat);
+	}
+
+	dwmac->dev = &pdev->dev;
+	dwmac->tx2_clk = devm_clk_get_optional(dwmac->dev, "tx2_clk");
+	if (IS_ERR(dwmac->tx2_clk)) {
+		ret = PTR_ERR(dwmac->tx2_clk);
+		dev_err(&pdev->dev, "couldn't get TX2 clock: %d\n", ret);
+		goto err_remove_config_dt;
+	}
+
+	if (dwmac->tx2_clk)
+		plat_dat->fix_mac_speed = baikal_dwmac_fix_mac_speed;
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->has_gmac = 1;
+	plat_dat->enh_desc = 1;
+	plat_dat->tx_coe = 1;
+	plat_dat->rx_coe = 1;
+	plat_dat->clk_csr = 3;
+	plat_dat->setup = baikal_dwmac_setup;
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto err_remove_config_dt;
+
+	return 0;
+
+err_remove_config_dt:
+	stmmac_remove_config_dt(pdev, plat_dat);
+	return ret;
+}
+
+static const struct of_device_id dwmac_baikal_match[] = {
+	{ .compatible = "baikal,dwmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwmac_baikal_match);
+
+static struct platform_driver dwmac_baikal_driver = {
+	.probe	= dwmac_baikal_probe,
+	.remove	= stmmac_pltfr_remove,
+	.driver	= {
+		.name = "baikal-dwmac",
+		.pm = &stmmac_pltfr_pm_ops,
+		.of_match_table = of_match_ptr(dwmac_baikal_match)
+	}
+};
+module_platform_driver(dwmac_baikal_driver);
+
+MODULE_DESCRIPTION("Baikal-T1/M DWMAC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 76edb9b72675..7b8a955d98a9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -563,3 +563,4 @@ int dwmac1000_setup(struct stmmac_priv *priv)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dwmac1000_setup);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index f5581db0ba9b..1782a65cc9af 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -15,8 +15,9 @@
 #include <asm/io.h>
 #include "dwmac1000.h"
 #include "dwmac_dma.h"
+#include "dwmac1000_dma.h"
 
-static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
+void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 {
 	u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
 	int i;
@@ -69,9 +70,10 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 
 	writel(value, ioaddr + DMA_AXI_BUS_MODE);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_axi);
 
-static void dwmac1000_dma_init(void __iomem *ioaddr,
-			       struct stmmac_dma_cfg *dma_cfg, int atds)
+void dwmac1000_dma_init(void __iomem *ioaddr,
+			struct stmmac_dma_cfg *dma_cfg, int atds)
 {
 	u32 value = readl(ioaddr + DMA_BUS_MODE);
 	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
@@ -109,22 +111,25 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 	/* Mask interrupts by writing to CSR7 */
 	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_init);
 
-static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
-				  struct stmmac_dma_cfg *dma_cfg,
-				  dma_addr_t dma_rx_phy, u32 chan)
+void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+			   struct stmmac_dma_cfg *dma_cfg,
+			   dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base address list must be written into DMA CSR3 */
 	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_init_rx);
 
-static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
-				  struct stmmac_dma_cfg *dma_cfg,
-				  dma_addr_t dma_tx_phy, u32 chan)
+void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+			   struct stmmac_dma_cfg *dma_cfg,
+			   dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base address list must be written into DMA CSR4 */
 	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_init_tx);
 
 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
 {
@@ -147,8 +152,8 @@ static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
 	return csr6;
 }
 
-static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
-					    u32 channel, int fifosz, u8 qmode)
+void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+				     u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
 
@@ -174,9 +179,10 @@ static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
 
 	writel(csr6, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_operation_mode_rx);
 
-static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
-					    u32 channel, int fifosz, u8 qmode)
+void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+				     u32 channel, int fifosz, u8 qmode)
 {
 	u32 csr6 = readl(ioaddr + DMA_CONTROL);
 
@@ -207,8 +213,9 @@ static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
 
 	writel(csr6, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dma_operation_mode_tx);
 
-static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
+void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
 {
 	int i;
 
@@ -217,9 +224,10 @@ static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
 			reg_space[DMA_BUS_MODE / 4 + i] =
 				readl(ioaddr + DMA_BUS_MODE + i * 4);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_dump_dma_regs);
 
-static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
-				    struct dma_features *dma_cap)
+int dwmac1000_get_hw_feature(void __iomem *ioaddr,
+			     struct dma_features *dma_cap)
 {
 	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
 
@@ -262,12 +270,14 @@ static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dwmac1000_get_hw_feature);
 
-static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
-				  u32 queue)
+void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
+			   u32 queue)
 {
 	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
 }
+EXPORT_SYMBOL_GPL(dwmac1000_rx_watchdog);
 
 const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.reset = dwmac_dma_reset,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.h
new file mode 100644
index 000000000000..b254a0734447
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __DWMAC1000_DMA_H__
+#define __DWMAC1000_DMA_H__
+#include "dwmac1000.h"
+
+void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi);
+void dwmac1000_dma_init(void __iomem *ioaddr,
+			struct stmmac_dma_cfg *dma_cfg, int atds);
+void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+			   struct stmmac_dma_cfg *dma_cfg,
+			   dma_addr_t dma_rx_phy, u32 chan);
+void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+			   struct stmmac_dma_cfg *dma_cfg,
+			   dma_addr_t dma_tx_phy, u32 chan);
+void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+				     u32 channel, int fifosz, u8 qmode);
+void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+				     u32 channel, int fifosz, u8 qmode);
+void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space);
+
+int  dwmac1000_get_hw_feature(void __iomem *ioaddr,
+			      struct dma_features *dma_cap);
+
+void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt, u32 number_chan);
+#endif /* __DWMAC1000_DMA_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index caa4bfc4c1d6..2d8d1b0e2b98 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -31,6 +31,7 @@ void dwmac_enable_dma_transmission(void __iomem *ioaddr)
 {
 	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
 }
+EXPORT_SYMBOL_GPL(dwmac_enable_dma_transmission);
 
 void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 {
@@ -43,6 +44,7 @@ void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 
 	writel(value, ioaddr + DMA_INTR_ENA);
 }
+EXPORT_SYMBOL_GPL(dwmac_enable_dma_irq);
 
 void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 {
@@ -55,6 +57,7 @@ void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
 
 	writel(value, ioaddr + DMA_INTR_ENA);
 }
+EXPORT_SYMBOL_GPL(dwmac_disable_dma_irq);
 
 void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
 {
@@ -62,6 +65,7 @@ void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
 	value |= DMA_CONTROL_ST;
 	writel(value, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac_dma_start_tx);
 
 void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
 {
@@ -69,6 +73,7 @@ void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
 	value &= ~DMA_CONTROL_ST;
 	writel(value, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac_dma_stop_tx);
 
 void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
 {
@@ -76,6 +81,7 @@ void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
 	value |= DMA_CONTROL_SR;
 	writel(value, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac_dma_start_rx);
 
 void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
 {
@@ -83,6 +89,7 @@ void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
 	value &= ~DMA_CONTROL_SR;
 	writel(value, ioaddr + DMA_CONTROL);
 }
+EXPORT_SYMBOL_GPL(dwmac_dma_stop_rx);
 
 #ifdef DWMAC_DMA_DEBUG
 static void show_tx_process_state(unsigned int status)
@@ -230,6 +237,7 @@ int dwmac_dma_interrupt(void __iomem *ioaddr,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(dwmac_dma_interrupt);
 
 void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
 {
-- 
2.32.0


  reply	other threads:[~2022-01-28 12:17 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-26  8:44 [PATCH 1/2] net: stmmac: added Baikal-T1/M SoCs glue layer Alexey Sheplyakov
2022-01-26  8:44 ` [PATCH 2/2] dt-bindings: dwmac: Add bindings for Baikal-T1/M SoCs Alexey Sheplyakov
2022-01-27  1:00 ` [PATCH 1/2] net: stmmac: added Baikal-T1/M SoCs glue layer Jakub Kicinski
2022-01-28 12:16   ` Alexey Sheplyakov [this message]
2022-01-28 12:16     ` [PATCH v2 2/2] dt-bindings: dwmac: Add bindings for Baikal-T1/M SoCs Alexey Sheplyakov
2022-01-28 17:00   ` [PATCH 1/2] net: stmmac: added Baikal-T1/M SoCs glue layer Alexey Sheplyakov
2022-01-28 15:06 ` Serge Semin
2022-01-28 18:55   ` Alexey Sheplyakov
2022-01-28 20:27     ` Jakub Kicinski
2022-02-01 15:54       ` Serge Semin
2022-02-01 19:08         ` Jakub Kicinski
2022-02-07 15:22           ` Serge Semin
2022-02-03 10:49   ` Alexey Sheplyakov
2022-02-07 17:48     ` Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220128121616.1463317-1-asheplyakov@basealt.ru \
    --to=asheplyakov@basealt.ru \
    --cc=alexandre.torgue@foss.st.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.