From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 5.10.y-cip 08/27] pinctrl: renesas: rzg2l: Add support to get/set drive-strength and output-impedance-ohms
Date: Mon, 31 Jan 2022 12:18:44 +0000 [thread overview]
Message-ID: <20220131121903.8620-9-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220131121903.8620-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
commit adb613f84a9e3638dfcc85975c7d58a4e80eef02 upstream.
RZ/G2L supports two groups of pins Group-A and Group-B. For Group-A
pins drive-strength can be configured and for Group-B output-impedance
can be configured.
This patch splits PIN_CFG_IOLH macro to PIN_CFG_IOLH_A/B and adds
support to get/set drive-strength and output-impedance-ohms for the
supported pins.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211110224622.16022-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 161 +++++++++++++++++-------
1 file changed, 113 insertions(+), 48 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 5ebb9034b572..ccee9c9e2e22 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -35,20 +35,21 @@
#define MUX_FUNC(pinconf) (((pinconf) & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
/* PIN capabilities */
-#define PIN_CFG_IOLH BIT(0)
-#define PIN_CFG_SR BIT(1)
-#define PIN_CFG_IEN BIT(2)
-#define PIN_CFG_PUPD BIT(3)
-#define PIN_CFG_IO_VMC_SD0 BIT(4)
-#define PIN_CFG_IO_VMC_SD1 BIT(5)
-#define PIN_CFG_IO_VMC_QSPI BIT(6)
-#define PIN_CFG_IO_VMC_ETH0 BIT(7)
-#define PIN_CFG_IO_VMC_ETH1 BIT(8)
-#define PIN_CFG_FILONOFF BIT(9)
-#define PIN_CFG_FILNUM BIT(10)
-#define PIN_CFG_FILCLKSEL BIT(11)
-
-#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH | \
+#define PIN_CFG_IOLH_A BIT(0)
+#define PIN_CFG_IOLH_B BIT(1)
+#define PIN_CFG_SR BIT(2)
+#define PIN_CFG_IEN BIT(3)
+#define PIN_CFG_PUPD BIT(4)
+#define PIN_CFG_IO_VMC_SD0 BIT(5)
+#define PIN_CFG_IO_VMC_SD1 BIT(6)
+#define PIN_CFG_IO_VMC_QSPI BIT(7)
+#define PIN_CFG_IO_VMC_ETH0 BIT(8)
+#define PIN_CFG_IO_VMC_ETH1 BIT(9)
+#define PIN_CFG_FILONOFF BIT(10)
+#define PIN_CFG_FILNUM BIT(11)
+#define PIN_CFG_FILCLKSEL BIT(12)
+
+#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH_A | \
PIN_CFG_SR | \
PIN_CFG_PUPD | \
PIN_CFG_FILONOFF | \
@@ -86,6 +87,7 @@
#define PMC(n) (0x0200 + 0x10 + (n))
#define PFC(n) (0x0400 + 0x40 + (n) * 4)
#define PIN(n) (0x0800 + 0x10 + (n))
+#define IOLH(n) (0x1000 + (n) * 8)
#define IEN(n) (0x1800 + (n) * 8)
#define PWPR (0x3014)
#define SD_CH(n) (0x3000 + (n) * 4)
@@ -101,6 +103,7 @@
#define PVDD_MASK 0x01
#define PFC_MASK 0x07
#define IEN_MASK 0x01
+#define IOLH_MASK 0x03
#define PM_INPUT 0x1
#define PM_OUTPUT 0x2
@@ -138,6 +141,9 @@ struct rzg2l_pinctrl {
spinlock_t lock;
};
+static const unsigned int iolh_groupa_mA[] = { 2, 4, 8, 12 };
+static const unsigned int iolh_groupb_oi[] = { 100, 66, 50, 33 };
+
static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
u8 port, u8 pin, u8 func)
{
@@ -532,6 +538,28 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
break;
}
+ case PIN_CONFIG_DRIVE_STRENGTH: {
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_A))
+ return -EINVAL;
+
+ index = rzg2l_read_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK);
+ arg = iolh_groupa_mA[index];
+ break;
+ }
+
+ case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_B))
+ return -EINVAL;
+
+ index = rzg2l_read_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK);
+ arg = iolh_groupb_oi[index];
+ break;
+ }
+
default:
return -ENOTSUPP;
}
@@ -609,6 +637,43 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
spin_unlock_irqrestore(&pctrl->lock, flags);
break;
}
+
+ case PIN_CONFIG_DRIVE_STRENGTH: {
+ unsigned int arg = pinconf_to_config_argument(_configs[i]);
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_A))
+ return -EINVAL;
+
+ for (index = 0; index < ARRAY_SIZE(iolh_groupa_mA); index++) {
+ if (arg == iolh_groupa_mA[index])
+ break;
+ }
+ if (index >= ARRAY_SIZE(iolh_groupa_mA))
+ return -EINVAL;
+
+ rzg2l_rmw_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK, index);
+ break;
+ }
+
+ case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
+ unsigned int arg = pinconf_to_config_argument(_configs[i]);
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_B))
+ return -EINVAL;
+
+ for (index = 0; index < ARRAY_SIZE(iolh_groupb_oi); index++) {
+ if (arg == iolh_groupb_oi[index])
+ break;
+ }
+ if (index >= ARRAY_SIZE(iolh_groupb_oi))
+ return -EINVAL;
+
+ rzg2l_rmw_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK, index);
+ break;
+ }
+
default:
return -EOPNOTSUPP;
}
@@ -935,75 +1000,75 @@ static struct rzg2l_dedicated_configs rzg2l_dedicated_pins[] = {
{ "NMI", RZG2L_SINGLE_PIN_PACK(0x1, 0,
(PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL)) },
{ "TMS/SWDIO", RZG2L_SINGLE_PIN_PACK(0x2, 0,
- (PIN_CFG_SR | PIN_CFG_IOLH | PIN_CFG_IEN)) },
+ (PIN_CFG_SR | PIN_CFG_IOLH_A | PIN_CFG_IEN)) },
{ "TDO", RZG2L_SINGLE_PIN_PACK(0x3, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN)) },
+ (PIN_CFG_IOLH_A | PIN_CFG_SR | PIN_CFG_IEN)) },
{ "AUDIO_CLK1", RZG2L_SINGLE_PIN_PACK(0x4, 0, PIN_CFG_IEN) },
{ "AUDIO_CLK2", RZG2L_SINGLE_PIN_PACK(0x4, 1, PIN_CFG_IEN) },
{ "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x6, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_CMD", RZG2L_SINGLE_PIN_PACK(0x6, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x6, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA0", RZG2L_SINGLE_PIN_PACK(0x7, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA1", RZG2L_SINGLE_PIN_PACK(0x7, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA2", RZG2L_SINGLE_PIN_PACK(0x7, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA3", RZG2L_SINGLE_PIN_PACK(0x7, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA4", RZG2L_SINGLE_PIN_PACK(0x7, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA5", RZG2L_SINGLE_PIN_PACK(0x7, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA6", RZG2L_SINGLE_PIN_PACK(0x7, 6,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA7", RZG2L_SINGLE_PIN_PACK(0x7, 7,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD1_CLK", RZG2L_SINGLE_PIN_PACK(0x8, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD1))},
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_CMD", RZG2L_SINGLE_PIN_PACK(0x8, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA0", RZG2L_SINGLE_PIN_PACK(0x9, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA1", RZG2L_SINGLE_PIN_PACK(0x9, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA2", RZG2L_SINGLE_PIN_PACK(0x9, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA3", RZG2L_SINGLE_PIN_PACK(0x9, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "QSPI0_SPCLK", RZG2L_SINGLE_PIN_PACK(0xa, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO0", RZG2L_SINGLE_PIN_PACK(0xa, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO1", RZG2L_SINGLE_PIN_PACK(0xa, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO2", RZG2L_SINGLE_PIN_PACK(0xa, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO3", RZG2L_SINGLE_PIN_PACK(0xa, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_SSL", RZG2L_SINGLE_PIN_PACK(0xa, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SPCLK", RZG2L_SINGLE_PIN_PACK(0xb, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO0", RZG2L_SINGLE_PIN_PACK(0xb, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO1", RZG2L_SINGLE_PIN_PACK(0xb, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO2", RZG2L_SINGLE_PIN_PACK(0xb, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO3", RZG2L_SINGLE_PIN_PACK(0xb, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SSL", RZG2L_SINGLE_PIN_PACK(0xb, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_RESET#", RZG2L_SINGLE_PIN_PACK(0xc, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_WP#", RZG2L_SINGLE_PIN_PACK(0xc, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_INT#", RZG2L_SINGLE_PIN_PACK(0xc, 2, (PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
- { "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH | PIN_CFG_SR)) },
+ { "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH_A | PIN_CFG_SR)) },
{ "RIIC0_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 0, PIN_CFG_IEN) },
{ "RIIC0_SCL", RZG2L_SINGLE_PIN_PACK(0xe, 1, PIN_CFG_IEN) },
{ "RIIC1_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 2, PIN_CFG_IEN) },
--
2.17.1
next prev parent reply other threads:[~2022-01-31 12:19 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-31 12:18 [PATCH 5.10.y-cip 00/27] Add RPCIF, SCI{F1} support to Renesas RZ/G2L SoC Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 01/27] dt-bindings: pincfg-node: Add "output-impedance-ohms" property Lad Prabhakar
2022-08-13 13:45 ` Pavel Machek
2022-08-14 21:37 ` Prabhakar Mahadev Lad
2022-01-31 12:18 ` [PATCH 5.10.y-cip 02/27] pinctrl: pinconf-generic: Add support for "output-impedance-ohms" to be extracted from DT files Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 03/27] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add output-impedance-ohms property Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 04/27] pinctrl: renesas: rzg2l: Rename RZG2L_SINGLE_PIN_GET_PORT macro Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 05/27] pinctrl: renesas: rzg2l: Add helper functions to read/write pin config Lad Prabhakar
2022-02-01 11:05 ` Pavel Machek
2022-01-31 12:18 ` [PATCH 5.10.y-cip 06/27] pinctrl: renesas: rzg2l: Add support to get/set pin config for GPIO port pins Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 07/27] pinctrl: renesas: rzg2l: Rename PIN_CFG_* macros to match HW manual Lad Prabhakar
2022-01-31 12:18 ` Lad Prabhakar [this message]
2022-01-31 12:18 ` [PATCH 5.10.y-cip 09/27] dt-bindings: memory: renesas,rpc-if: Miscellaneous improvements Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 10/27] dt-bindings: memory: renesas,rpc-if: Add support for the R9A07G044 Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 11/27] dt-bindings: memory: renesas,rpc-if: Add optional interrupts property Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 12/27] mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init() Lad Prabhakar
2022-02-01 3:08 ` nobuhiro1.iwamatsu
2022-01-31 12:18 ` [PATCH 5.10.y-cip 13/27] memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails Lad Prabhakar
2022-02-01 3:10 ` nobuhiro1.iwamatsu
2022-01-31 12:18 ` [PATCH 5.10.y-cip 14/27] memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 15/27] memory: renesas-rpc-if: correct whitespace Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 16/27] memory: renesas-rpc-if: Add support for RZ/G2L Lad Prabhakar
2022-02-01 11:08 ` Pavel Machek
2022-02-01 11:20 ` Pavel Machek
2022-01-31 12:18 ` [PATCH 5.10.y-cip 17/27] clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 18/27] arm64: dts: renesas: r9a07g044: Add SPI Multi I/O Bus controller node Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 19/27] arm64: dts: renesas: rzg2l-smarc-som: Enable serial NOR flash Lad Prabhakar
2022-02-01 11:10 ` Pavel Machek
2022-01-31 12:18 ` [PATCH 5.10.y-cip 20/27] clk: renesas: r9a07g044: Add clock and reset entry for SCI1 Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 21/27] dt-bindings: serial: renesas,scif: Make resets as a required property Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 22/27] dt-bindings: serial: renesas,sci: Document RZ/G2L SoC Lad Prabhakar
2022-01-31 12:18 ` [PATCH 5.10.y-cip 23/27] serial: sh-sci: Add support to deassert/assert reset line Lad Prabhakar
2022-01-31 12:19 ` [PATCH 5.10.y-cip 24/27] arm64: dts: renesas: r9a07g044: Add SCIF[1-4] nodes Lad Prabhakar
2022-01-31 12:19 ` [PATCH 5.10.y-cip 25/27] arm64: dts: renesas: rzg2l-smarc: Enable SCIF2 on carrier board Lad Prabhakar
2022-02-01 11:11 ` Pavel Machek
2022-01-31 12:19 ` [PATCH 5.10.y-cip 26/27] arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodes Lad Prabhakar
2022-01-31 12:19 ` [PATCH 5.10.y-cip 27/27] arm64: dts: renesas: r9a07g044: Sort psci node Lad Prabhakar
2022-02-01 11:22 ` [PATCH 5.10.y-cip 00/27] Add RPCIF, SCI{F1} support to Renesas RZ/G2L SoC Pavel Machek
2022-02-01 18:58 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220131121903.8620-9-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.