From: Ahmad Fatoum <a.fatoum@pengutronix.de> To: Alain Volmat <alain.volmat@foss.st.com>, Mark Brown <broonie@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Dillon Min <dillon.minfei@gmail.com>, kernel@pengutronix.de, Ahmad Fatoum <a.fatoum@pengutronix.de>, linux-spi@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [RFT PATCH] spi: stm32: ignore Rx queue not empty in stm32f4 Tx only mode Date: Tue, 1 Feb 2022 12:51:41 +0100 [thread overview] Message-ID: <20220201115142.3999860-1-a.fatoum@pengutronix.de> (raw) STM32F4_SPI_SR_RXNE and STM32F4_SPI_SR_OVR are distinct bits in the same status register. ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE is thus equal to ~STM32F4_SPI_SR_OVR. The original intention was likely for transmission-only transfers to ignore interrupts both for when the Rx queue has bytes (RXNE) as well as when these bytes haven't been read in time (OVR). Fix the typo by adding the missing parenthesis. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> --- Noticed reading driver code. Untested on actual Hardware. If you can test this, please do. --- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 9bd3fd1652f7..56062f88881d 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -763,7 +763,7 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id) if (!spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)) { /* OVR flag shouldn't be handled for TX only mode */ - sr &= ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE; + sr &= ~(STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE); mask |= STM32F4_SPI_SR_TXE; } -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Ahmad Fatoum <a.fatoum@pengutronix.de> To: Alain Volmat <alain.volmat@foss.st.com>, Mark Brown <broonie@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Dillon Min <dillon.minfei@gmail.com>, kernel@pengutronix.de, Ahmad Fatoum <a.fatoum@pengutronix.de>, linux-spi@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [RFT PATCH] spi: stm32: ignore Rx queue not empty in stm32f4 Tx only mode Date: Tue, 1 Feb 2022 12:51:41 +0100 [thread overview] Message-ID: <20220201115142.3999860-1-a.fatoum@pengutronix.de> (raw) STM32F4_SPI_SR_RXNE and STM32F4_SPI_SR_OVR are distinct bits in the same status register. ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE is thus equal to ~STM32F4_SPI_SR_OVR. The original intention was likely for transmission-only transfers to ignore interrupts both for when the Rx queue has bytes (RXNE) as well as when these bytes haven't been read in time (OVR). Fix the typo by adding the missing parenthesis. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> --- Noticed reading driver code. Untested on actual Hardware. If you can test this, please do. --- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 9bd3fd1652f7..56062f88881d 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -763,7 +763,7 @@ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id) if (!spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)) { /* OVR flag shouldn't be handled for TX only mode */ - sr &= ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE; + sr &= ~(STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE); mask |= STM32F4_SPI_SR_TXE; } -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-02-01 11:52 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-02-01 11:51 Ahmad Fatoum [this message] 2022-02-01 11:51 ` [RFT PATCH] spi: stm32: ignore Rx queue not empty in stm32f4 Tx only mode Ahmad Fatoum 2022-02-22 15:32 ` Mark Brown 2022-02-22 15:32 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220201115142.3999860-1-a.fatoum@pengutronix.de \ --to=a.fatoum@pengutronix.de \ --cc=alain.volmat@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=broonie@kernel.org \ --cc=dillon.minfei@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.