All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Tero Kristo <t-kristo@ti.com>,
	linux-omap@vger.kernel.org
Subject: [PATCH 8/8] clk: ti: Update component clocks to use ti_dt_clk_name()
Date: Fri,  4 Feb 2022 09:14:49 +0200	[thread overview]
Message-ID: <20220204071449.16762-9-tony@atomide.com> (raw)
In-Reply-To: <20220204071449.16762-1-tony@atomide.com>

Let's update all the TI component clocks to use ti_dt_clk_name() instead
of devicetree node name if available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/autoidle.c     | 2 +-
 drivers/clk/ti/clk-dra7-atl.c | 6 ++++--
 drivers/clk/ti/composite.c    | 6 ++++--
 drivers/clk/ti/divider.c      | 6 ++++--
 drivers/clk/ti/fixed-factor.c | 2 +-
 drivers/clk/ti/gate.c         | 4 +++-
 drivers/clk/ti/interface.c    | 4 +++-
 drivers/clk/ti/mux.c          | 4 +++-
 8 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -205,7 +205,7 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 		return -ENOMEM;
 
 	clk->shift = shift;
-	clk->name = node->name;
+	clk->name = ti_dt_clk_name(node);
 	ret = ti_clk_get_reg_addr(node, 0, &clk->reg);
 	if (ret) {
 		kfree(clk);
diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c
--- a/drivers/clk/ti/clk-dra7-atl.c
+++ b/drivers/clk/ti/clk-dra7-atl.c
@@ -173,6 +173,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 	struct dra7_atl_desc *clk_hw = NULL;
 	struct clk_init_data init = { NULL };
 	const char **parent_names = NULL;
+	const char *name;
 	struct clk *clk;
 
 	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
@@ -183,7 +184,8 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 
 	clk_hw->hw.init = &init;
 	clk_hw->divider = 1;
-	init.name = node->name;
+	name = ti_dt_clk_name(node);
+	init.name = name;
 	init.ops = &atl_clk_ops;
 	init.flags = CLK_IGNORE_UNUSED;
 	init.num_parents = of_clk_get_parent_count(node);
@@ -203,7 +205,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 
 	init.parent_names = parent_names;
 
-	clk = ti_clk_register(NULL, &clk_hw->hw, node->name);
+	clk = ti_clk_register(NULL, &clk_hw->hw, name);
 
 	if (!IS_ERR(clk)) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c
--- a/drivers/clk/ti/composite.c
+++ b/drivers/clk/ti/composite.c
@@ -125,6 +125,7 @@ static void __init _register_composite(void *user,
 	struct component_clk *comp;
 	int num_parents = 0;
 	const char **parent_names = NULL;
+	const char *name;
 	int i;
 	int ret;
 
@@ -172,7 +173,8 @@ static void __init _register_composite(void *user,
 		goto cleanup;
 	}
 
-	clk = clk_register_composite(NULL, node->name,
+	name = ti_dt_clk_name(node);
+	clk = clk_register_composite(NULL, name,
 				     parent_names, num_parents,
 				     _get_hw(cclk, CLK_COMPONENT_TYPE_MUX),
 				     &ti_clk_mux_ops,
@@ -182,7 +184,7 @@ static void __init _register_composite(void *user,
 				     &ti_composite_gate_ops, 0);
 
 	if (!IS_ERR(clk)) {
-		ret = ti_clk_add_alias(NULL, clk, node->name);
+		ret = ti_clk_add_alias(NULL, clk, name);
 		if (ret) {
 			clk_unregister(clk);
 			goto cleanup;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -320,10 +320,12 @@ static struct clk *_register_divider(struct device_node *node,
 	struct clk *clk;
 	struct clk_init_data init;
 	const char *parent_name;
+	const char *name;
 
 	parent_name = of_clk_get_parent_name(node, 0);
 
-	init.name = node->name;
+	name = ti_dt_clk_name(node);
+	init.name = name;
 	init.ops = &ti_clk_divider_ops;
 	init.flags = flags;
 	init.parent_names = (parent_name ? &parent_name : NULL);
@@ -332,7 +334,7 @@ static struct clk *_register_divider(struct device_node *node,
 	div->hw.init = &init;
 
 	/* register the clock */
-	clk = ti_clk_register(NULL, &div->hw, node->name);
+	clk = ti_clk_register(NULL, &div->hw, name);
 
 	if (IS_ERR(clk))
 		kfree(div);
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -36,7 +36,7 @@
 static void __init of_ti_fixed_factor_clk_setup(struct device_node *node)
 {
 	struct clk *clk;
-	const char *clk_name = node->name;
+	const char *clk_name = ti_dt_clk_name(node);
 	const char *parent_name;
 	u32 div, mult;
 	u32 flags = 0;
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -138,6 +138,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 	struct clk *clk;
 	const char *parent_name;
 	struct clk_omap_reg reg;
+	const char *name;
 	u8 enable_bit = 0;
 	u32 val;
 	u32 flags = 0;
@@ -164,7 +165,8 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
 		clk_gate_flags |= INVERT_ENABLE;
 
-	clk = _register_gate(NULL, node->name, parent_name, flags, &reg,
+	name = ti_dt_clk_name(node);
+	clk = _register_gate(NULL, name, parent_name, flags, &reg,
 			     enable_bit, clk_gate_flags, ops, hw_ops);
 
 	if (!IS_ERR(clk))
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -72,6 +72,7 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 	const char *parent_name;
 	struct clk_omap_reg reg;
 	u8 enable_bit = 0;
+	const char *name;
 	u32 val;
 
 	if (ti_clk_get_reg_addr(node, 0, &reg))
@@ -86,7 +87,8 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 		return;
 	}
 
-	clk = _register_interface(NULL, node->name, parent_name, &reg,
+	name = ti_dt_clk_name(node);
+	clk = _register_interface(NULL, name, parent_name, &reg,
 				  enable_bit, ops);
 
 	if (!IS_ERR(clk))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -176,6 +176,7 @@ static void of_mux_clk_setup(struct device_node *node)
 	struct clk_omap_reg reg;
 	unsigned int num_parents;
 	const char **parent_names;
+	const char *name;
 	u8 clk_mux_flags = 0;
 	u32 mask = 0;
 	u32 shift = 0;
@@ -213,7 +214,8 @@ static void of_mux_clk_setup(struct device_node *node)
 
 	mask = (1 << fls(mask)) - 1;
 
-	clk = _register_mux(NULL, node->name, parent_names, num_parents,
+	name = ti_dt_clk_name(node);
+	clk = _register_mux(NULL, name, parent_names, num_parents,
 			    flags, &reg, shift, mask, latch, clk_mux_flags,
 			    NULL);
 
-- 
2.35.1

  parent reply	other threads:[~2022-02-04  7:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04  7:14 [PATCH 0/8] Clock changes for TI dts reg and node name issues Tony Lindgren
2022-02-04  7:14 ` [PATCH 1/8] clk: ti: Constify clkctrl_name Tony Lindgren
2022-03-11  3:30   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 2/8] clk: ti: Preserve node in ti_dt_clocks_register() Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 3/8] clk: ti: Optionally parse IO address from parent clock node Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 4/8] clk: ti: Add ti_find_clock_provider() to use clock-output-names Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 5/8] clk: ti: Use clock-output-names for clkctrl Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 6/8] clk: ti: Add ti_dt_clk_name() helper to use clock-output-names Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` [PATCH 7/8] clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() Tony Lindgren
2022-03-11  3:31   ` Stephen Boyd
2022-02-04  7:14 ` Tony Lindgren [this message]
2022-03-11  3:32   ` [PATCH 8/8] clk: ti: Update component " Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220204071449.16762-9-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.