From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Ilan Peer <ilan.peer@intel.com>
Subject: [PATCH v3 04/19] ieee80211: Add EHT (802.11be) definitions
Date: Mon, 14 Feb 2022 17:29:51 +0100 [thread overview]
Message-ID: <20220214173004.928e23cacb2b.Id30a3ef2844b296efbd5486fe1da9ca36a95c5cf@changeid> (raw)
In-Reply-To: <20220214173004.9fd154d2c3c2.Ia0cd152357a373149bab017d479ab7d5ded289c0@changeid>
From: Ilan Peer <ilan.peer@intel.com>
Based on Draft P802.11be_D1.4.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
include/linux/ieee80211.h | 299 ++++++++++++++++++++++++++++++++++++++
1 file changed, 299 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index dfc84680af82..7204bc28ca31 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <linux/if_ether.h>
#include <linux/etherdevice.h>
+#include <linux/bitfield.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
@@ -1925,6 +1926,111 @@ struct ieee80211_mu_edca_param_set {
struct ieee80211_he_mu_edca_param_ac_rec ac_vo;
} __packed;
+#define IEEE80211_EHT_MCS_NSS_RX 0x0f
+#define IEEE80211_EHT_MCS_NSS_TX 0xf0
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_20mhz_only - EHT 20MHz only station max
+ * supported NSS for per MCS.
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs7_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 0 - 7.
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 8 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_20mhz_only {
+ u8 rx_tx_mcs7_max_nss;
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_bw - EHT max supported NSS per MCS (except
+ * 20MHz only stations).
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 0 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_bw {
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_cap_elem_fixed - EHT capabilities fixed data
+ *
+ * This structure is the "EHT Capabilities element" fixed fields as
+ * described in P802.11be_D1.4 section 9.4.2.313.
+ *
+ * @mac_cap_info: MAC capabilities, see IEEE80211_EHT_MAC_CAP*
+ * @phy_cap_info: PHY capabilities, see IEEE80211_EHT_PHY_CAP*
+ */
+struct ieee80211_eht_cap_elem_fixed {
+ u8 mac_cap_info[2];
+ u8 phy_cap_info[9];
+} __packed;
+
+/**
+ * struct ieee80211_eht_cap_elem - EHT capabilities element
+ * @fixed: fixed parts, see &ieee80211_eht_cap_elem_fixed
+ * @optional: optional parts
+ */
+struct ieee80211_eht_cap_elem {
+ struct ieee80211_eht_cap_elem_fixed fixed;
+
+ /*
+ * Followed by:
+ * Supported EHT-MCS And NSS Set field: 4, 3, 6 or 9 octets.
+ * EHT PPE Thresholds field: variable length.
+ */
+ u8 optional[];
+} __packed;
+
+/**
+ * struct ieee80211_eht_operation - eht operation element
+ *
+ * This structure is the "EHT Operation Element" fields as
+ * described in P802.11be_D1.4 section 9.4.2.311
+ *
+ * FIXME: The spec is unclear how big the fields are, and doesn't
+ * indicate the "Disabled Subchannel Bitmap Present" in the
+ * structure (Figure 9-1002a) at all ...
+ */
+struct ieee80211_eht_operation {
+ u8 chan_width;
+ u8 ccfs;
+ u8 present_bm;
+
+ u8 disable_subchannel_bitmap[];
+} __packed;
+
+#define IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT 0x1
+
/* 802.11ac VHT Capabilities */
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001
@@ -2129,6 +2235,8 @@ enum ieee80211_client_reg_power {
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL 0x1e
+
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe
@@ -2622,6 +2730,194 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1)
+/* EHT MAC capabilities as defined in P802.11be_D1.4 section 9.4.2.313.2 */
+#define IEEE80211_EHT_MAC_CAP0_NSEP_PRIO_ACCESS 0x01
+#define IEEE80211_EHT_MAC_CAP0_OM_CONTROL 0x02
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 0x04
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2 0x08
+#define IEEE80211_EHT_MAC_CAP0_RESTRICTED_TWT 0x10
+#define IEEE80211_EHT_MAC_CAP0_SCS_TRAFFIC_DESC 0x20
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_MASK 0xc0
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_3895 0
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_7991 1
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_11454 2
+
+/* EHT PHY capabilities as defined in P802.11be_D1.4 section 9.4.2.313.3 */
+#define IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ 0x02
+#define IEEE80211_EHT_PHY_CAP0_242_TONE_RU_GT20MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI 0x08
+#define IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO 0x10
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER 0x20
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE 0x40
+
+/* EHT beamformee number of spatial streams <= 80MHz is split */
+#define IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK 0x80
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_80MHZ_MASK 0x03
+
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK 0x1c
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK 0xe0
+
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK 0x07
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK 0x38
+
+/* EHT number of sounding dimensions for 320MHz is split */
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP3_SOUNDING_DIM_320MHZ_MASK 0x01
+#define IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK 0x02
+#define IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK 0x04
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK 0x08
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK 0x10
+#define IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK 0x20
+#define IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK 0x40
+#define IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK 0x80
+
+#define IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO 0x01
+#define IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI 0x08
+#define IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK 0xf0
+
+#define IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK 0x01
+#define IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT 0x08
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK 0x30
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_0US 0
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_8US 1
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US 2
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US 3
+
+/* Maximum number of supported EHT LTF is split */
+#define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK 0x07
+
+#define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK 0x78
+#define IEEE80211_EHT_PHY_CAP6_EHT_DUP_6GHZ_SUPP 0x80
+
+#define IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW 0x01
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ 0x02
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ 0x08
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ 0x10
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ 0x20
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ 0x40
+#define IEEE80211_EHT_PHY_CAP7_TB_SOUNDING_FDBK_RATE_LIMIT 0x80
+
+#define IEEE80211_EHT_PHY_CAP8_RX_1024QAM_WIDER_BW_DL_OFDMA 0x01
+#define IEEE80211_EHT_PHY_CAP8_RX_4096QAM_WIDER_BW_DL_OFDMA 0x02
+
+/*
+ * EHT operation channel width as defined in P802.11be_D1.4 section 9.4.2.311
+ */
+#define IEEE80211_EHT_OPER_CHAN_WIDTH 0x7
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_20MHZ 0
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_40MHZ 1
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ 2
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_160MHZ 3
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_320MHZ 4
+
+/* Calculate 802.11be EHT capabilities IE Tx/Rx EHT MCS NSS Support Field size */
+static inline u8
+ieee80211_eht_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap,
+ const struct ieee80211_eht_cap_elem_fixed *eht_cap)
+{
+ u8 count = 0;
+
+ /* on 2.4 GHz, if it supports 40 MHz, the result is 3 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G)
+ return 3;
+
+ /* on 2.4 GHz, these three bits are reserved, so should be 0 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)
+ count += 3;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 3;
+
+ if (eht_cap->phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)
+ count += 3;
+
+ return count ? count : 4;
+}
+
+/* 802.11be EHT PPE Thresholds */
+#define IEEE80211_EHT_PPE_THRES_NSS_POS 0
+#define IEEE80211_EHT_PPE_THRES_NSS_MASK 0xf
+#define IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK 0x1f0
+#define IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE 3
+#define IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE 9
+
+/*
+ * Calculate 802.11be EHT capabilities IE EHT field size
+ */
+static inline u8
+ieee80211_eht_ppe_size(u16 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u32 n;
+
+ if (!(phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT))
+ return 0;
+
+ n = hweight16(ppe_thres_hdr &
+ IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= 1 + u16_get_bits(ppe_thres_hdr, IEEE80211_EHT_PPE_THRES_NSS_MASK);
+
+ /*
+ * Each pair is 6 bits, and we need to add the 9 "header" bits to the
+ * total size.
+ */
+ n = n * IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2 +
+ IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE;
+ return DIV_ROUND_UP(n, 8);
+}
+
+static inline bool
+ieee80211_eht_capa_size_ok(const u8 *he_capa, const u8 *data, u8 len)
+{
+ const struct ieee80211_eht_cap_elem_fixed *elem = (const void *)data;
+ u8 needed = sizeof(struct ieee80211_eht_cap_elem_fixed);
+
+ if (len < needed || !he_capa)
+ return false;
+
+ needed += ieee80211_eht_mcs_nss_size((const void *)he_capa,
+ (const void *)data);
+ if (len < needed)
+ return false;
+
+ if (elem->phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) {
+ u16 ppe_thres_hdr;
+
+ if (len < needed + sizeof(ppe_thres_hdr))
+ return false;
+
+ ppe_thres_hdr = get_unaligned_le16(data + needed);
+ needed += ieee80211_eht_ppe_size(ppe_thres_hdr,
+ elem->phy_cap_info);
+ }
+
+ return len >= needed;
+}
+
+static inline bool
+ieee80211_eht_oper_size_ok(const u8 *data, u8 len)
+{
+ const struct ieee80211_eht_operation *elem = (const void *)data;
+ u8 needed = sizeof(*elem);
+
+ if (len < needed)
+ return false;
+
+ if (elem->present_bm & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)
+ needed += 2;
+
+ return len >= needed;
+}
#define LISTEN_INT_USF GENMASK(15, 14)
#define LISTEN_INT_UI GENMASK(13, 0)
@@ -3077,6 +3373,9 @@ enum ieee80211_eid_ext {
WLAN_EID_EXT_SHORT_SSID_LIST = 58,
WLAN_EID_EXT_HE_6GHZ_CAPA = 59,
WLAN_EID_EXT_UL_MU_POWER_CAPA = 60,
+ WLAN_EID_EXT_EHT_OPERATION = 106,
+ WLAN_EID_EXT_EHT_MULTI_LINK = 107,
+ WLAN_EID_EXT_EHT_CAPABILITY = 108,
};
/* Action category code */
--
2.34.1
next prev parent reply other threads:[~2022-02-14 16:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 16:29 [PATCH v3 01/19] mac80211_hwsim: check TX and STA bandwidth Johannes Berg
2022-02-14 16:29 ` [PATCH v3 02/19] mac80211_hwsim: don't shadow a global variable Johannes Berg
2022-02-14 16:29 ` [PATCH v3 03/19] mac80211_hwsim: Add custom regulatory for 6GHz Johannes Berg
2022-02-14 16:29 ` Johannes Berg [this message]
2022-02-14 16:29 ` [PATCH v3 05/19] ieee80211: add EHT 1K aggregation definitions Johannes Berg
2022-02-14 16:29 ` [PATCH v3 06/19] cfg80211: Add data structures to capture EHT capabilities Johannes Berg
2022-02-14 16:29 ` [PATCH v3 07/19] cfg80211: Add support for EHT 320 MHz channel width Johannes Berg
2022-02-14 16:29 ` [PATCH v3 08/19] nl80211: add EHT MCS support Johannes Berg
2022-02-14 16:29 ` [PATCH v3 09/19] nl80211: add support for 320MHz channel limitation Johannes Berg
2022-02-14 16:29 ` [PATCH v3 10/19] cfg80211: add NO-EHT flag to regulatory Johannes Berg
2022-02-14 16:29 ` [PATCH v3 11/19] cfg80211: Support configuration of station EHT capabilities Johannes Berg
2022-02-14 16:29 ` [PATCH v3 12/19] mac80211: Support parsing EHT elements Johannes Berg
2022-02-14 16:30 ` [PATCH v3 13/19] mac80211: Add initial support for EHT and 320 MHz channels Johannes Berg
2022-02-14 16:30 ` [PATCH v3 14/19] mac80211: Add EHT capabilities to association/probe request Johannes Berg
2022-02-14 16:30 ` [PATCH v3 15/19] mac80211: Handle station association response with EHT Johannes Berg
2022-02-14 16:30 ` [PATCH v3 16/19] mac80211: Add support for storing station EHT capabilities Johannes Berg
2022-02-14 16:30 ` [PATCH v3 17/19] mac80211: calculate max RX NSS for EHT mode Johannes Berg
2022-02-14 16:30 ` [PATCH v3 18/19] mac80211: parse AddBA request with extended AddBA element Johannes Berg
2022-02-14 16:30 ` [PATCH v3 19/19] mac80211_hwsim: Advertise support for EHT capabilities Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214173004.928e23cacb2b.Id30a3ef2844b296efbd5486fe1da9ca36a95c5cf@changeid \
--to=johannes@sipsolutions.net \
--cc=ilan.peer@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.