From: "Marek Behún" <kabel@kernel.org> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Stephen Boyd <sboyd@kernel.org> Cc: "Gregory Clement" <gregory.clement@bootlin.com>, "Pali Rohár" <pali@kernel.org>, linux-clk@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Marek Behún" <kabel@kernel.org> Subject: [PATCH v9 6/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Date: Sat, 19 Feb 2022 16:28:18 +0100 [thread overview] Message-ID: <20220219152818.4319-7-kabel@kernel.org> (raw) In-Reply-To: <20220219152818.4319-1-kabel@kernel.org> From: Pali Rohár <pali@kernel.org> Define DT node for UART clock "marvell,armada-3700-uart-clock" and use this UART clock as a base clock for all UART devices. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 673f4906eef9..da2f6b5c4b20 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -132,10 +132,20 @@ avs: avs@11500 { reg = <0x11500 0x40>; }; + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x18>; - clocks = <&xtalclk>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -147,7 +157,7 @@ uart0: serial@12000 { uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: "Marek Behún" <kabel@kernel.org> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Stephen Boyd <sboyd@kernel.org> Cc: "Gregory Clement" <gregory.clement@bootlin.com>, "Pali Rohár" <pali@kernel.org>, linux-clk@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Marek Behún" <kabel@kernel.org> Subject: [PATCH v9 6/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Date: Sat, 19 Feb 2022 16:28:18 +0100 [thread overview] Message-ID: <20220219152818.4319-7-kabel@kernel.org> (raw) In-Reply-To: <20220219152818.4319-1-kabel@kernel.org> From: Pali Rohár <pali@kernel.org> Define DT node for UART clock "marvell,armada-3700-uart-clock" and use this UART clock as a base clock for all UART devices. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 673f4906eef9..da2f6b5c4b20 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -132,10 +132,20 @@ avs: avs@11500 { reg = <0x11500 0x40>; }; + uartclk: clock-controller@12010 { + compatible = "marvell,armada-3700-uart-clock"; + reg = <0x12010 0x4>, <0x12210 0x4>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", + "TBG-B-S", "xtal"; + #clock-cells = <1>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x18>; - clocks = <&xtalclk>; + clocks = <&uartclk 0>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, @@ -147,7 +157,7 @@ uart0: serial@12000 { uart1: serial@12200 { compatible = "marvell,armada-3700-uart-ext"; reg = <0x12200 0x30>; - clocks = <&xtalclk>; + clocks = <&uartclk 1>; interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-19 15:28 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-02-19 15:28 [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates Marek Behún 2022-02-19 15:28 ` Marek Behún 2022-02-19 15:28 ` [PATCH v9 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Marek Behún 2022-02-19 15:28 ` Marek Behún 2022-02-19 15:28 ` [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Marek Behún 2022-02-19 15:28 ` [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Marek Behún 2022-02-24 23:01 ` [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Stephen Boyd 2022-02-24 23:01 ` [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Stephen Boyd 2022-02-19 15:28 ` [PATCH v9 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Marek Behún 2022-02-19 15:28 ` Marek Behún 2022-02-24 23:02 ` Stephen Boyd 2022-02-24 23:02 ` Stephen Boyd 2022-02-19 15:28 ` [PATCH v9 4/6] dt-bindings: mvebu-uart: update information about UART clock Marek Behún 2022-02-19 15:28 ` Marek Behún 2022-02-24 23:02 ` Stephen Boyd 2022-02-24 23:02 ` Stephen Boyd 2022-02-19 15:28 ` [PATCH v9 5/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd Marek Behún 2022-02-19 15:28 ` Marek Behún 2022-02-19 15:28 ` Marek Behún [this message] 2022-02-19 15:28 ` [PATCH v9 6/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Marek Behún 2022-02-25 19:32 ` [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár 2022-02-25 19:32 ` Pali Rohár 2022-02-25 19:39 ` Marek Behún 2022-02-25 19:39 ` Marek Behún
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220219152818.4319-7-kabel@kernel.org \ --to=kabel@kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=gregory.clement@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=pali@kernel.org \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.