All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>,
	Michael Hennerich <Michael.Hennerich@analog.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Kai-Heng Feng <kai.heng.feng@canonical.com>
Subject: [PATCH v2 1/8] iio: accel: adxl345: Convert to use dev_err_probe()
Date: Tue, 22 Feb 2022 11:00:02 +0200	[thread overview]
Message-ID: <20220222090009.2060-1-andriy.shevchenko@linux.intel.com> (raw)

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: fixed typo (LKP), shorten one line to satisfy checkpatch
 drivers/iio/accel/adxl345_core.c | 26 +++++++++-----------------
 drivers/iio/accel/adxl345_i2c.c  |  7 ++-----
 drivers/iio/accel/adxl345_spi.c  | 15 +++++----------
 3 files changed, 16 insertions(+), 32 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index ef2240e356e0..078e1029e49d 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -222,16 +222,12 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	int ret;
 
 	ret = regmap_read(regmap, ADXL345_REG_DEVID, &regval);
-	if (ret < 0) {
-		dev_err(dev, "Error reading device ID: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Error reading device ID\n");
 
-	if (regval != ADXL345_DEVID) {
-		dev_err(dev, "Invalid device ID: %x, expected %x\n",
-			regval, ADXL345_DEVID);
-		return -ENODEV;
-	}
+	if (regval != ADXL345_DEVID)
+		return dev_err_probe(dev, -ENODEV, "Invalid device ID: %x, expected %x\n",
+				     regval, ADXL345_DEVID);
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
@@ -245,10 +241,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 
 	ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT,
 			   data->data_range);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set data range: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to set data range\n");
 
 	indio_dev->name = name;
 	indio_dev->info = &adxl345_info;
@@ -259,10 +253,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	/* Enable measurement mode */
 	ret = regmap_write(data->regmap, ADXL345_REG_POWER_CTL,
 			   ADXL345_POWER_CTL_MEASURE);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable measurement mode: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to enable measurement mode\n");
 
 	ret = devm_add_action_or_reset(dev, adxl345_powerdown, data->regmap);
 	if (ret < 0)
diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c
index 7bc8324c4f07..e3205dce91b8 100644
--- a/drivers/iio/accel/adxl345_i2c.c
+++ b/drivers/iio/accel/adxl345_i2c.c
@@ -28,11 +28,8 @@ static int adxl345_i2c_probe(struct i2c_client *client,
 		return -ENODEV;
 
 	regmap = devm_regmap_init_i2c(client, &adxl345_i2c_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
-			PTR_ERR(regmap));
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap), "Error initializing regmap\n");
 
 	return adxl345_core_probe(&client->dev, regmap, id->driver_data,
 				  id->name);
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index c752562c5d3b..9223302fdd46 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -26,18 +26,13 @@ static int adxl345_spi_probe(struct spi_device *spi)
 	struct regmap *regmap;
 
 	/* Bail out if max_speed_hz exceeds 5 MHz */
-	if (spi->max_speed_hz > ADXL345_MAX_SPI_FREQ_HZ) {
-		dev_err(&spi->dev, "SPI CLK, %d Hz exceeds 5 MHz\n",
-			spi->max_speed_hz);
-		return -EINVAL;
-	}
+	if (spi->max_speed_hz > ADXL345_MAX_SPI_FREQ_HZ)
+		return dev_err_probe(&spi->dev, -EINVAL, "SPI CLK, %d Hz exceeds 5 MHz\n",
+				     spi->max_speed_hz);
 
 	regmap = devm_regmap_init_spi(spi, &adxl345_spi_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
-			PTR_ERR(regmap));
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
 
 	return adxl345_core_probe(&spi->dev, regmap, id->driver_data, id->name);
 }
-- 
2.34.1


             reply	other threads:[~2022-02-22  8:59 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-22  9:00 Andy Shevchenko [this message]
2022-02-22  9:00 ` [PATCH v2 2/8] iio: accel: adxl345: Set driver_data for OF enumeration Andy Shevchenko
2022-02-22  9:00 ` [PATCH v2 3/8] iio: accel: adxl345: Get rid of name parameter in adxl345_core_probe() Andy Shevchenko
2022-02-26 18:54   ` Jonathan Cameron
2022-02-22  9:00 ` [PATCH v2 4/8] iio: accel: adxl345: Make use of device properties Andy Shevchenko
2022-02-26 19:05   ` Jonathan Cameron
2022-02-27 11:22   ` Jonathan Cameron
2022-02-22  9:00 ` [PATCH v2 5/8] iio: accel: adxl345: Add ACPI HID table Andy Shevchenko
2022-02-22  9:00 ` [PATCH v2 6/8] iio: accel: adxl345: Extract adxl345_powerup() helper Andy Shevchenko
2022-02-22  9:00 ` [PATCH v2 7/8] iio: accel: adxl345: Drop comma in terminator entries Andy Shevchenko
2022-02-22  9:00 ` [PATCH v2 8/8] iio: accel: adxl345: Remove unneeded blank lines Andy Shevchenko
2022-02-23  3:10 ` [PATCH v2 1/8] iio: accel: adxl345: Convert to use dev_err_probe() Kai-Heng Feng
2022-02-26 19:12   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220222090009.2060-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=jic23@kernel.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.