All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wong Vee Khee <vee.khee.wong@linux.intel.com>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/1] stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S
Date: Fri, 25 Feb 2022 10:33:25 +0800	[thread overview]
Message-ID: <20220225023325.474242-1-vee.khee.wong@linux.intel.com> (raw)

Intel AlderLake-S platform is capable of running on 2.5GBps link speed.

This patch enables 2.5Gbps link speed on AlderLake-S platform.

Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 5943ff9f21c2..32ef3df4e266 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -721,6 +721,7 @@ static int tgl_common_data(struct pci_dev *pdev,
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 200000000;
+	plat->speed_mode_2500 = intel_speed_mode_2500;
 
 	plat->safety_feat_cfg->tsoee = 1;
 	plat->safety_feat_cfg->mrxpee = 0;
@@ -740,7 +741,6 @@ static int tgl_sgmii_phy0_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
@@ -755,7 +755,6 @@ static int tgl_sgmii_phy1_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 2;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Wong Vee Khee <vee.khee.wong@linux.intel.com>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/1] stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S
Date: Fri, 25 Feb 2022 10:33:25 +0800	[thread overview]
Message-ID: <20220225023325.474242-1-vee.khee.wong@linux.intel.com> (raw)

Intel AlderLake-S platform is capable of running on 2.5GBps link speed.

This patch enables 2.5Gbps link speed on AlderLake-S platform.

Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 5943ff9f21c2..32ef3df4e266 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -721,6 +721,7 @@ static int tgl_common_data(struct pci_dev *pdev,
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 200000000;
+	plat->speed_mode_2500 = intel_speed_mode_2500;
 
 	plat->safety_feat_cfg->tsoee = 1;
 	plat->safety_feat_cfg->mrxpee = 0;
@@ -740,7 +741,6 @@ static int tgl_sgmii_phy0_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
@@ -755,7 +755,6 @@ static int tgl_sgmii_phy1_data(struct pci_dev *pdev,
 {
 	plat->bus_id = 2;
 	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
-	plat->speed_mode_2500 = intel_speed_mode_2500;
 	plat->serdes_powerup = intel_serdes_powerup;
 	plat->serdes_powerdown = intel_serdes_powerdown;
 	return tgl_common_data(pdev, plat);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-02-25  2:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-25  2:33 Wong Vee Khee [this message]
2022-02-25  2:33 ` [PATCH net-next 1/1] stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S Wong Vee Khee
2022-02-26  6:30 ` patchwork-bot+netdevbpf
2022-02-26  6:30   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220225023325.474242-1-vee.khee.wong@linux.intel.com \
    --to=vee.khee.wong@linux.intel.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.