All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Mark Brown <broonie@kernel.org>
Subject: [PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members
Date: Fri, 25 Feb 2022 19:23:49 +0200	[thread overview]
Message-ID: <20220225172350.69797-10-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220225172350.69797-1-andriy.shevchenko@linux.intel.com>

Instead of using temporary storage, assign the values directly
to the corresponding struct pxa2xx_spi_controller members.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-pci.c | 110 ++++++++++++++++-------------------
 1 file changed, 49 insertions(+), 61 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 2dbe08034ad0..3c5d14affa95 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -28,19 +28,7 @@
 #define PCI_DEVICE_ID_INTEL_LPT1_1		0x9ce6
 
 struct pxa_spi_info {
-	enum pxa_ssp_type type;
-	unsigned int port_id;
-	unsigned int num_chipselect;
-	unsigned long max_clk_rate;
-
-	/* DMA channel request parameters */
-	bool (*dma_filter)(struct dma_chan *chan, void *param);
-	void *tx_param;
-	void *rx_param;
-
-	unsigned int dma_burst_size;
-
-	int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c);
+	int (*setup)(struct pci_dev *pdev, struct pxa2xx_spi_controller *c);
 };
 
 static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
@@ -99,48 +87,49 @@ static void lpss_dma_put_device(void *dma_dev)
 	pci_dev_put(dma_dev);
 }
 
-static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int lpss_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
+	struct ssp_device *ssp = &c->ssp;
 	struct dw_dma_slave *tx, *rx;
 	struct pci_dev *dma_dev;
 	int ret;
 
 	switch (dev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT:
-		c->type = LPSS_BYT_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_BYT_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &byt_tx_param;
 		c->rx_param = &byt_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW0:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &bsw0_tx_param;
 		c->rx_param = &bsw0_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW1:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 1;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 1;
 		c->tx_param = &bsw1_tx_param;
 		c->rx_param = &bsw1_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW2:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 2;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 2;
 		c->tx_param = &bsw2_tx_param;
 		c->rx_param = &bsw2_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_LPT0_0:
 	case PCI_DEVICE_ID_INTEL_LPT1_0:
-		c->type = LPSS_LPT_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_LPT_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &lpt0_tx_param;
 		c->rx_param = &lpt0_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_LPT0_1:
 	case PCI_DEVICE_ID_INTEL_LPT1_1:
-		c->type = LPSS_LPT_SSP;
-		c->port_id = 1;
+		ssp->type = LPSS_LPT_SSP;
+		ssp->port_id = 1;
 		c->tx_param = &lpt1_tx_param;
 		c->rx_param = &lpt1_rx_param;
 		break;
@@ -149,7 +138,10 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 	}
 
 	c->num_chipselect = 1;
-	c->max_clk_rate = 50000000;
+
+	ret = pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
+	if (ret)
+		return ret;
 
 	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
 	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -168,6 +160,7 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 	c->dma_filter = lpss_dma_filter;
 	c->dma_burst_size = 1;
+	c->enable_dma = 1;
 	return 0;
 }
 
@@ -175,41 +168,45 @@ static struct pxa_spi_info lpss_info_config = {
 	.setup = lpss_spi_setup,
 };
 
-static int ce4100_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int ce4100_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
-	c->type = PXA25x_SSP;
-	c->port_id = dev->devfn;
+	struct ssp_device *ssp = &c->ssp;
+
+	ssp->type = PXA25x_SSP;
+	ssp->port_id = dev->devfn;
 	c->num_chipselect = dev->devfn;
-	c->max_clk_rate = 3686400;
 
-	return 0;
+	return pxa2xx_spi_pci_clk_register(dev, ssp, 3686400);
 }
 
 static struct pxa_spi_info ce4100_info_config = {
 	.setup = ce4100_spi_setup,
 };
 
-static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int mrfld_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
+	struct ssp_device *ssp = &c->ssp;
 	struct dw_dma_slave *tx, *rx;
 	struct pci_dev *dma_dev;
 	int ret;
 
+	ssp->type = MRFLD_SSP;
+
 	switch (PCI_FUNC(dev->devfn)) {
 	case 0:
-		c->port_id = 3;
+		ssp->port_id = 3;
 		c->num_chipselect = 1;
 		c->tx_param = &mrfld3_tx_param;
 		c->rx_param = &mrfld3_rx_param;
 		break;
 	case 1:
-		c->port_id = 5;
+		ssp->port_id = 5;
 		c->num_chipselect = 4;
 		c->tx_param = &mrfld5_tx_param;
 		c->rx_param = &mrfld5_rx_param;
 		break;
 	case 2:
-		c->port_id = 6;
+		ssp->port_id = 6;
 		c->num_chipselect = 1;
 		c->tx_param = &mrfld6_tx_param;
 		c->rx_param = &mrfld6_rx_param;
@@ -218,8 +215,9 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 		return -ENODEV;
 	}
 
-	c->type = MRFLD_SSP;
-	c->max_clk_rate = 25000000;
+	ret = pxa2xx_spi_pci_clk_register(dev, ssp, 25000000);
+	if (ret)
+		return ret;
 
 	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
 	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -234,6 +232,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 	c->dma_filter = lpss_dma_filter;
 	c->dma_burst_size = 8;
+	c->enable_dma = 1;
 	return 0;
 }
 
@@ -241,14 +240,15 @@ static struct pxa_spi_info mrfld_info_config = {
 	.setup = mrfld_spi_setup,
 };
 
-static int qrk_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int qrk_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
-	c->type = QUARK_X1000_SSP;
-	c->port_id = dev->devfn;
+	struct ssp_device *ssp = &c->ssp;
+
+	ssp->type = QUARK_X1000_SSP;
+	ssp->port_id = dev->devfn;
 	c->num_chipselect = 1;
-	c->max_clk_rate = 50000000;
 
-	return 0;
+	return pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
 }
 
 static struct pxa_spi_info qrk_info_config = {
@@ -262,8 +262,8 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	int ret;
 	struct platform_device *pdev;
 	struct pxa2xx_spi_controller spi_pdata;
+	struct pxa_spi_info *info;
 	struct ssp_device *ssp;
-	struct pxa_spi_info *c;
 
 	ret = pcim_enable_device(dev);
 	if (ret)
@@ -273,25 +273,17 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	c = (struct pxa_spi_info *)ent->driver_data;
-	ret = c->setup(dev, c);
-	if (ret)
-		return ret;
-
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
-	spi_pdata.num_chipselect = c->num_chipselect;
-	spi_pdata.dma_filter = c->dma_filter;
-	spi_pdata.tx_param = c->tx_param;
-	spi_pdata.rx_param = c->rx_param;
-	spi_pdata.enable_dma = c->rx_param && c->tx_param;
-	spi_pdata.dma_burst_size = c->dma_burst_size;
 
 	ssp = &spi_pdata.ssp;
 	ssp->dev = &dev->dev;
 	ssp->phys_base = pci_resource_start(dev, 0);
 	ssp->mmio_base = pcim_iomap_table(dev)[0];
-	ssp->type = c->type;
-	ssp->port_id = c->port_id;
+
+	info = (struct pxa_spi_info *)ent->driver_data;
+	ret = info->setup(dev, &spi_pdata);
+	if (ret)
+		return ret;
 
 	pci_set_master(dev);
 
@@ -300,10 +292,6 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 		return ret;
 	ssp->irq = pci_irq_vector(dev, 0);
 
-	ret = pxa2xx_spi_pci_clk_register(dev, ssp, c->max_clk_rate);
-	if (ret)
-		return ret;
-
 	memset(&pi, 0, sizeof(pi));
 	pi.fwnode = dev_fwnode(&dev->dev);
 	pi.parent = &dev->dev;
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Mark Brown <broonie@kernel.org>
Subject: [PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members
Date: Fri, 25 Feb 2022 19:23:49 +0200	[thread overview]
Message-ID: <20220225172350.69797-10-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220225172350.69797-1-andriy.shevchenko@linux.intel.com>

Instead of using temporary storage, assign the values directly
to the corresponding struct pxa2xx_spi_controller members.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-pci.c | 110 ++++++++++++++++-------------------
 1 file changed, 49 insertions(+), 61 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 2dbe08034ad0..3c5d14affa95 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -28,19 +28,7 @@
 #define PCI_DEVICE_ID_INTEL_LPT1_1		0x9ce6
 
 struct pxa_spi_info {
-	enum pxa_ssp_type type;
-	unsigned int port_id;
-	unsigned int num_chipselect;
-	unsigned long max_clk_rate;
-
-	/* DMA channel request parameters */
-	bool (*dma_filter)(struct dma_chan *chan, void *param);
-	void *tx_param;
-	void *rx_param;
-
-	unsigned int dma_burst_size;
-
-	int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c);
+	int (*setup)(struct pci_dev *pdev, struct pxa2xx_spi_controller *c);
 };
 
 static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
@@ -99,48 +87,49 @@ static void lpss_dma_put_device(void *dma_dev)
 	pci_dev_put(dma_dev);
 }
 
-static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int lpss_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
+	struct ssp_device *ssp = &c->ssp;
 	struct dw_dma_slave *tx, *rx;
 	struct pci_dev *dma_dev;
 	int ret;
 
 	switch (dev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT:
-		c->type = LPSS_BYT_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_BYT_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &byt_tx_param;
 		c->rx_param = &byt_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW0:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &bsw0_tx_param;
 		c->rx_param = &bsw0_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW1:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 1;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 1;
 		c->tx_param = &bsw1_tx_param;
 		c->rx_param = &bsw1_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_BSW2:
-		c->type = LPSS_BSW_SSP;
-		c->port_id = 2;
+		ssp->type = LPSS_BSW_SSP;
+		ssp->port_id = 2;
 		c->tx_param = &bsw2_tx_param;
 		c->rx_param = &bsw2_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_LPT0_0:
 	case PCI_DEVICE_ID_INTEL_LPT1_0:
-		c->type = LPSS_LPT_SSP;
-		c->port_id = 0;
+		ssp->type = LPSS_LPT_SSP;
+		ssp->port_id = 0;
 		c->tx_param = &lpt0_tx_param;
 		c->rx_param = &lpt0_rx_param;
 		break;
 	case PCI_DEVICE_ID_INTEL_LPT0_1:
 	case PCI_DEVICE_ID_INTEL_LPT1_1:
-		c->type = LPSS_LPT_SSP;
-		c->port_id = 1;
+		ssp->type = LPSS_LPT_SSP;
+		ssp->port_id = 1;
 		c->tx_param = &lpt1_tx_param;
 		c->rx_param = &lpt1_rx_param;
 		break;
@@ -149,7 +138,10 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 	}
 
 	c->num_chipselect = 1;
-	c->max_clk_rate = 50000000;
+
+	ret = pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
+	if (ret)
+		return ret;
 
 	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
 	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -168,6 +160,7 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 	c->dma_filter = lpss_dma_filter;
 	c->dma_burst_size = 1;
+	c->enable_dma = 1;
 	return 0;
 }
 
@@ -175,41 +168,45 @@ static struct pxa_spi_info lpss_info_config = {
 	.setup = lpss_spi_setup,
 };
 
-static int ce4100_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int ce4100_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
-	c->type = PXA25x_SSP;
-	c->port_id = dev->devfn;
+	struct ssp_device *ssp = &c->ssp;
+
+	ssp->type = PXA25x_SSP;
+	ssp->port_id = dev->devfn;
 	c->num_chipselect = dev->devfn;
-	c->max_clk_rate = 3686400;
 
-	return 0;
+	return pxa2xx_spi_pci_clk_register(dev, ssp, 3686400);
 }
 
 static struct pxa_spi_info ce4100_info_config = {
 	.setup = ce4100_spi_setup,
 };
 
-static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int mrfld_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
+	struct ssp_device *ssp = &c->ssp;
 	struct dw_dma_slave *tx, *rx;
 	struct pci_dev *dma_dev;
 	int ret;
 
+	ssp->type = MRFLD_SSP;
+
 	switch (PCI_FUNC(dev->devfn)) {
 	case 0:
-		c->port_id = 3;
+		ssp->port_id = 3;
 		c->num_chipselect = 1;
 		c->tx_param = &mrfld3_tx_param;
 		c->rx_param = &mrfld3_rx_param;
 		break;
 	case 1:
-		c->port_id = 5;
+		ssp->port_id = 5;
 		c->num_chipselect = 4;
 		c->tx_param = &mrfld5_tx_param;
 		c->rx_param = &mrfld5_rx_param;
 		break;
 	case 2:
-		c->port_id = 6;
+		ssp->port_id = 6;
 		c->num_chipselect = 1;
 		c->tx_param = &mrfld6_tx_param;
 		c->rx_param = &mrfld6_rx_param;
@@ -218,8 +215,9 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 		return -ENODEV;
 	}
 
-	c->type = MRFLD_SSP;
-	c->max_clk_rate = 25000000;
+	ret = pxa2xx_spi_pci_clk_register(dev, ssp, 25000000);
+	if (ret)
+		return ret;
 
 	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
 	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -234,6 +232,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 	c->dma_filter = lpss_dma_filter;
 	c->dma_burst_size = 8;
+	c->enable_dma = 1;
 	return 0;
 }
 
@@ -241,14 +240,15 @@ static struct pxa_spi_info mrfld_info_config = {
 	.setup = mrfld_spi_setup,
 };
 
-static int qrk_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int qrk_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
 {
-	c->type = QUARK_X1000_SSP;
-	c->port_id = dev->devfn;
+	struct ssp_device *ssp = &c->ssp;
+
+	ssp->type = QUARK_X1000_SSP;
+	ssp->port_id = dev->devfn;
 	c->num_chipselect = 1;
-	c->max_clk_rate = 50000000;
 
-	return 0;
+	return pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
 }
 
 static struct pxa_spi_info qrk_info_config = {
@@ -262,8 +262,8 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	int ret;
 	struct platform_device *pdev;
 	struct pxa2xx_spi_controller spi_pdata;
+	struct pxa_spi_info *info;
 	struct ssp_device *ssp;
-	struct pxa_spi_info *c;
 
 	ret = pcim_enable_device(dev);
 	if (ret)
@@ -273,25 +273,17 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	c = (struct pxa_spi_info *)ent->driver_data;
-	ret = c->setup(dev, c);
-	if (ret)
-		return ret;
-
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
-	spi_pdata.num_chipselect = c->num_chipselect;
-	spi_pdata.dma_filter = c->dma_filter;
-	spi_pdata.tx_param = c->tx_param;
-	spi_pdata.rx_param = c->rx_param;
-	spi_pdata.enable_dma = c->rx_param && c->tx_param;
-	spi_pdata.dma_burst_size = c->dma_burst_size;
 
 	ssp = &spi_pdata.ssp;
 	ssp->dev = &dev->dev;
 	ssp->phys_base = pci_resource_start(dev, 0);
 	ssp->mmio_base = pcim_iomap_table(dev)[0];
-	ssp->type = c->type;
-	ssp->port_id = c->port_id;
+
+	info = (struct pxa_spi_info *)ent->driver_data;
+	ret = info->setup(dev, &spi_pdata);
+	if (ret)
+		return ret;
 
 	pci_set_master(dev);
 
@@ -300,10 +292,6 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 		return ret;
 	ssp->irq = pci_irq_vector(dev, 0);
 
-	ret = pxa2xx_spi_pci_clk_register(dev, ssp, c->max_clk_rate);
-	if (ret)
-		return ret;
-
 	memset(&pi, 0, sizeof(pi));
 	pi.fwnode = dev_fwnode(&dev->dev);
 	pi.parent = &dev->dev;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-02-25 17:24 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-25 17:23 [PATCH v1 01/11] spi: pxa2xx-pci: Refactor CE4100 to use ->setup() Andy Shevchenko
2022-02-25 17:23 ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 02/11] spi: pxa2xx-pci: Refactor Quark X1000 " Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 03/11] spi: pxa2xx-pci: Drop redundant NULL check in ->probe() Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 04/11] spi: pxa2xx-pci: Move port_id assignment to ->setup() Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 05/11] spi: pxa2xx-pci: Move dma_burst_size " Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 06/11] spi: pxa2xx-pci: Move max_clk_rate " Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 07/11] spi: pxa2xx-pci: Replace enum with direct use of PCI IDs Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 08/11] spi: pxa2xx-pci: Drop unneeded checks in lpss_spi_setup() Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 09/11] spi: pxa2xx-pci: Extract pxa2xx_spi_pci_clk_register() Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-25 17:23 ` Andy Shevchenko [this message]
2022-02-25 17:23   ` [PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members Andy Shevchenko
2022-02-25 17:23 ` [PATCH v1 11/11] spi: pxa2xx-pci: Constify struct pxa_spi_info variables Andy Shevchenko
2022-02-25 17:23   ` Andy Shevchenko
2022-02-28 22:00 ` [PATCH v1 01/11] spi: pxa2xx-pci: Refactor CE4100 to use ->setup() Mark Brown
2022-02-28 22:00   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220225172350.69797-10-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=daniel@zonque.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.