[PATCH v3 0/7] enable usb support on rk356x

From: Peter Geis <pgwipeout@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-rockchip@lists.infradead.org, heiko@sntech.de,
	michael.riesch@wolfvision.net, jbx6244@gmail.com,
	Peter Geis <pgwipeout@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Felipe Balbi <balbi@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH v3 0/7] enable usb support on rk356x
Date: Sun, 27 Feb 2022 10:30:09 -0500	[thread overview]
Message-ID: <20220227153016.950473-1-pgwipeout@gmail.com> (raw)

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed.

Patch 1 fixes the grf dt binding from the combophy merge.
Patch 2 adds the dt bindings for the grf changes necessary.
Patch 3 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 4 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patch 5 adds the dwc3 nodes to the rk356x device tree includes.
Patch 6 enables the dwc3 nodes on the Quartz64 Model A.
Patch 7 enables the dwc3 nodes on the rk3568-evb.

Note, there are functional changes from previous versions.

Please review and apply.

Very Respectfully,
Peter Geis

Changelog:
v3:
- Drop the dwc-of-simple method in favor of using dwc core.
- Drop all quirks except snps,dis_u2_susphy_quirk, which is necessary to
  prevent device detection failures in some states.
- Drop the reset-names.

v2:
- Add a dt-bindings fix for grf.yaml
- Unify the reset names.
- Constrain the force usb2 clock dwc3 patch to only supported variants of
the ip.
- Change dwc3-of-simple to support of-match-data.
- Drop the PCLK-PIPE clk.
- Rename the usb nodes to be more friendly.
- Add the rk3568-evb enable patch.

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Michael Riesch (1):
  arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (5):
  dt-bindings: soc: grf: fix rk3568 usb definitions
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  soc: rockchip: set dwc3 clock for rk3566
  arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
  arm64: dts: rockchip: enable dwc3 on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  5 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 11 +++++
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 46 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 35 +++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  5 ++
 drivers/usb/dwc3/core.h                       |  1 +
 9 files changed, 163 insertions(+), 3 deletions(-)

-- 
2.25.1