From: Jiasheng Jiang <jiasheng@iscas.ac.cn> To: ckeepax@opensource.cirrus.com Cc: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz, tiwai@suse.com, patches@opensource.cirrus.com, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Jiasheng Jiang <jiasheng@iscas.ac.cn> Subject: [PATCH v2] ASoC: wm8350: Handle error for wm8350_register_irq Date: Fri, 4 Mar 2022 10:38:21 +0800 [thread overview] Message-ID: <20220304023821.391936-1-jiasheng@iscas.ac.cn> (raw) As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, use 'free_' in order to avoid the same code. Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> --- Changelog: v1 -> v2 * Change 1. Change to non-caps labels and remove the revert to 'return ret;'. --- sound/soc/codecs/wm8350.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 15d42ce3b21d..41504ce2a682 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1537,18 +1537,38 @@ static int wm8350_component_probe(struct snd_soc_component *component) wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, WM8350_JDL_ENA | WM8350_JDR_ENA); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, wm8350_hpl_jack_handler, 0, "Left jack detect", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, + if (ret != 0) + goto err; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, wm8350_hpr_jack_handler, 0, "Right jack detect", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, + if (ret != 0) + goto free_jck_det_l; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, wm8350_mic_handler, 0, "Microphone short", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD, + if (ret != 0) + goto free_jck_det_r; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD, wm8350_mic_handler, 0, "Microphone detect", priv); + if (ret != 0) + goto free_micscd; return 0; + +free_micscd: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, priv); +free_jck_det_r: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, priv); +free_jck_det_l: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, priv); +err: + return ret; } static void wm8350_component_remove(struct snd_soc_component *component) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jiasheng Jiang <jiasheng@iscas.ac.cn> To: ckeepax@opensource.cirrus.com Cc: alsa-devel@alsa-project.org, patches@opensource.cirrus.com, Jiasheng Jiang <jiasheng@iscas.ac.cn>, tiwai@suse.com, lgirdwood@gmail.com, broonie@kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] ASoC: wm8350: Handle error for wm8350_register_irq Date: Fri, 4 Mar 2022 10:38:21 +0800 [thread overview] Message-ID: <20220304023821.391936-1-jiasheng@iscas.ac.cn> (raw) As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, use 'free_' in order to avoid the same code. Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> --- Changelog: v1 -> v2 * Change 1. Change to non-caps labels and remove the revert to 'return ret;'. --- sound/soc/codecs/wm8350.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 15d42ce3b21d..41504ce2a682 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -1537,18 +1537,38 @@ static int wm8350_component_probe(struct snd_soc_component *component) wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, WM8350_JDL_ENA | WM8350_JDR_ENA); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, wm8350_hpl_jack_handler, 0, "Left jack detect", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, + if (ret != 0) + goto err; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, wm8350_hpr_jack_handler, 0, "Right jack detect", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, + if (ret != 0) + goto free_jck_det_l; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, wm8350_mic_handler, 0, "Microphone short", priv); - wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD, + if (ret != 0) + goto free_jck_det_r; + + ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD, wm8350_mic_handler, 0, "Microphone detect", priv); + if (ret != 0) + goto free_micscd; return 0; + +free_micscd: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, priv); +free_jck_det_r: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, priv); +free_jck_det_l: + wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, priv); +err: + return ret; } static void wm8350_component_remove(struct snd_soc_component *component) -- 2.25.1
next reply other threads:[~2022-03-04 2:38 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-04 2:38 Jiasheng Jiang [this message] 2022-03-04 2:38 ` [PATCH v2] ASoC: wm8350: Handle error for wm8350_register_irq Jiasheng Jiang 2022-03-04 10:00 ` Charles Keepax 2022-03-04 10:00 ` Charles Keepax 2022-03-07 20:39 ` Mark Brown 2022-03-07 20:39 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220304023821.391936-1-jiasheng@iscas.ac.cn \ --to=jiasheng@iscas.ac.cn \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=ckeepax@opensource.cirrus.com \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=patches@opensource.cirrus.com \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.