From: Sergiu Moga <sergiu.moga@microchip.com> To: <a.zummo@towertech.it>, <alexandre.belloni@bootlin.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>, <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com> Cc: <linux-rtc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Sergiu Moga <sergiu.moga@microchip.com>, Tudor Ambarus <tudor.ambarus@microchip.com> Subject: [PATCH v4 2/4] ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs Date: Fri, 4 Mar 2022 18:11:57 +0200 [thread overview] Message-ID: <20220304161159.147784-3-sergiu.moga@microchip.com> (raw) In-Reply-To: <20220304161159.147784-1-sergiu.moga@microchip.com> As the DT specification recommends, the node names should be of a generic nature. Thus, the most appropriate generic node name for the at91 rtt IPs is the "rtc" node name. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- arch/arm/boot/dts/sam9x60.dtsi | 2 +- arch/arm/boot/dts/sama7g5.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 998629a3c34f..c328b67bea0c 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -684,7 +684,7 @@ shutdown_controller: shdwc@fffffe10 { status = "disabled"; }; - rtt: rtt@fffffe20 { + rtt: rtc@fffffe20 { compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index e6d0c90cf710..5d8841d0831a 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -170,7 +170,7 @@ shdwc: shdwc@e001d010 { status = "disabled"; }; - rtt: rtt@e001d020 { + rtt: rtc@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sergiu Moga <sergiu.moga@microchip.com> To: <a.zummo@towertech.it>, <alexandre.belloni@bootlin.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>, <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com> Cc: <linux-rtc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Sergiu Moga <sergiu.moga@microchip.com>, Tudor Ambarus <tudor.ambarus@microchip.com> Subject: [PATCH v4 2/4] ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs Date: Fri, 4 Mar 2022 18:11:57 +0200 [thread overview] Message-ID: <20220304161159.147784-3-sergiu.moga@microchip.com> (raw) In-Reply-To: <20220304161159.147784-1-sergiu.moga@microchip.com> As the DT specification recommends, the node names should be of a generic nature. Thus, the most appropriate generic node name for the at91 rtt IPs is the "rtc" node name. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- arch/arm/boot/dts/sam9x60.dtsi | 2 +- arch/arm/boot/dts/sama7g5.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 998629a3c34f..c328b67bea0c 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -684,7 +684,7 @@ shutdown_controller: shdwc@fffffe10 { status = "disabled"; }; - rtt: rtt@fffffe20 { + rtt: rtc@fffffe20 { compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index e6d0c90cf710..5d8841d0831a 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -170,7 +170,7 @@ shdwc: shdwc@e001d010 { status = "disabled"; }; - rtt: rtt@e001d020 { + rtt: rtc@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-04 16:12 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-04 16:11 [PATCH v4 0/4] dt-bindings: rtc: convert at91sam9 bindings to Sergiu Moga 2022-03-04 16:11 ` Sergiu Moga 2022-03-04 16:11 ` [PATCH v4 1/4] ARM: dts: at91: Add the required `atmel,rtt-rtc-time-reg` property Sergiu Moga 2022-03-04 16:11 ` [PATCH v4 1/4] ARM: dts: at91: Add the required `atmel, rtt-rtc-time-reg` property Sergiu Moga 2022-03-08 17:20 ` Tudor.Ambarus 2022-03-08 17:20 ` Tudor.Ambarus 2022-03-04 16:11 ` Sergiu Moga [this message] 2022-03-04 16:11 ` [PATCH v4 2/4] ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs Sergiu Moga 2022-03-04 16:11 ` [PATCH v4 3/4] dt-bindings: rtc: convert at91sam9 bindings to json-schema Sergiu Moga 2022-03-04 16:11 ` Sergiu Moga 2022-03-04 22:14 ` Rob Herring 2022-03-04 22:14 ` Rob Herring 2022-03-05 21:09 ` Krzysztof Kozlowski 2022-03-05 21:09 ` Krzysztof Kozlowski 2022-03-08 15:54 ` (subset) " Alexandre Belloni 2022-03-08 15:54 ` Alexandre Belloni 2022-03-04 16:11 ` [PATCH v4 4/4] dt-bindings: rtc: at91: Add SAMA7G5 compatible strings list Sergiu Moga 2022-03-04 16:11 ` Sergiu Moga 2022-03-08 8:22 ` Tudor.Ambarus 2022-03-08 8:22 ` Tudor.Ambarus 2022-03-08 15:54 ` (subset) " Alexandre Belloni 2022-03-08 15:54 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220304161159.147784-3-sergiu.moga@microchip.com \ --to=sergiu.moga@microchip.com \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ --cc=tudor.ambarus@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.