From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: devicetree@vger.kernel.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Jacopo Mondi <jacopo@jmondi.org>,
Eugen Hristev <eugen.hristev@microchip.com>,
Hugues Fruchet <hugues.fruchet@foss.st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v2 3/3] ARM: dts: Use new media bus type macros
Date: Sun, 6 Mar 2022 19:39:05 +0200 [thread overview]
Message-ID: <20220306173905.22990-4-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20220306173905.22990-1-laurent.pinchart@ideasonboard.com>
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 +++-
arch/arm/boot/dts/omap3-n900.dts | 5 +++--
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 11 +++++++----
.../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 4 +++-
.../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 4 +++-
arch/arm/boot/dts/stm32429i-eval.dts | 3 ++-
arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
7 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..89234bbd02f4 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
//
// Copyright (C) 2015 Freescale Semiconductor, Inc.
+#include <dt-bindings/media/video-interfaces.h>
+
/ {
chosen {
stdout-path = &uart1;
@@ -170,7 +172,7 @@ &csi {
port {
parallel_from_ov5640: endpoint {
remote-endpoint = <&ov5640_to_parallel>;
- bus-type = <5>; /* Parallel bus */
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d40c3d2c4914..9cad9d6a83e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,6 +9,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -194,7 +195,7 @@ port@1 {
csi_isp: endpoint {
remote-endpoint = <&csi_cam1>;
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
@@ -835,7 +836,7 @@ cam1: camera@3e {
port {
csi_cam1: endpoint {
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
strobe = <1>;
clock-inv = <0>;
crc = <1>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..1043603fc4a5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
*/
/dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
#include "r8a7742-iwg21d-q7.dts"
/ {
@@ -242,7 +245,7 @@ port {
vin0ep: endpoint {
remote-endpoint = <&cam0ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -273,7 +276,7 @@ port {
vin1ep: endpoint {
remote-endpoint = <&cam1ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -305,7 +308,7 @@ vin2ep: endpoint {
remote-endpoint = <&cam2ep>;
bus-width = <8>;
data-shift = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -335,7 +338,7 @@ port {
vin3ep: endpoint {
remote-endpoint = <&cam3ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 40cef0b1d1e6..c73160df619d 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -26,7 +28,7 @@ port {
CAM_EP: endpoint {
bus-width = <8>;
data-shift = <2>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
pclk-sample = <1>;
remote-endpoint = <&VIN_EP>;
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
index f5e77f024251..a7f5cfec64b8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -21,7 +23,7 @@ ov7725@21 {
port {
CAM_EP: endpoint {
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
remote-endpoint = <&VIN_EP>;
};
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..ecb10613d962 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov2640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e222d2d2cb44..24f59f3b15dc 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,6 +8,7 @@
#include "stm32mp157c-ed1.dts"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -90,7 +91,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: devicetree@vger.kernel.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: Jacopo Mondi <jacopo@jmondi.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Hugues Fruchet <hugues.fruchet@foss.st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Shawn Guo <shawnguo@kernel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Rob Herring <robh+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Eugen Hristev <eugen.hristev@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] ARM: dts: Use new media bus type macros
Date: Sun, 6 Mar 2022 19:39:05 +0200 [thread overview]
Message-ID: <20220306173905.22990-4-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20220306173905.22990-1-laurent.pinchart@ideasonboard.com>
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 +++-
arch/arm/boot/dts/omap3-n900.dts | 5 +++--
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 11 +++++++----
.../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 4 +++-
.../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 4 +++-
arch/arm/boot/dts/stm32429i-eval.dts | 3 ++-
arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
7 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..89234bbd02f4 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
//
// Copyright (C) 2015 Freescale Semiconductor, Inc.
+#include <dt-bindings/media/video-interfaces.h>
+
/ {
chosen {
stdout-path = &uart1;
@@ -170,7 +172,7 @@ &csi {
port {
parallel_from_ov5640: endpoint {
remote-endpoint = <&ov5640_to_parallel>;
- bus-type = <5>; /* Parallel bus */
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d40c3d2c4914..9cad9d6a83e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,6 +9,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -194,7 +195,7 @@ port@1 {
csi_isp: endpoint {
remote-endpoint = <&csi_cam1>;
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
@@ -835,7 +836,7 @@ cam1: camera@3e {
port {
csi_cam1: endpoint {
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
strobe = <1>;
clock-inv = <0>;
crc = <1>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..1043603fc4a5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
*/
/dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
#include "r8a7742-iwg21d-q7.dts"
/ {
@@ -242,7 +245,7 @@ port {
vin0ep: endpoint {
remote-endpoint = <&cam0ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -273,7 +276,7 @@ port {
vin1ep: endpoint {
remote-endpoint = <&cam1ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -305,7 +308,7 @@ vin2ep: endpoint {
remote-endpoint = <&cam2ep>;
bus-width = <8>;
data-shift = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -335,7 +338,7 @@ port {
vin3ep: endpoint {
remote-endpoint = <&cam3ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 40cef0b1d1e6..c73160df619d 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -26,7 +28,7 @@ port {
CAM_EP: endpoint {
bus-width = <8>;
data-shift = <2>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
pclk-sample = <1>;
remote-endpoint = <&VIN_EP>;
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
index f5e77f024251..a7f5cfec64b8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -21,7 +23,7 @@ ov7725@21 {
port {
CAM_EP: endpoint {
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
remote-endpoint = <&VIN_EP>;
};
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..ecb10613d962 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov2640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e222d2d2cb44..24f59f3b15dc 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,6 +8,7 @@
#include "stm32mp157c-ed1.dts"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -90,7 +91,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: devicetree@vger.kernel.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Jacopo Mondi <jacopo@jmondi.org>,
Eugen Hristev <eugen.hristev@microchip.com>,
Hugues Fruchet <hugues.fruchet@foss.st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v2 3/3] ARM: dts: Use new media bus type macros
Date: Sun, 6 Mar 2022 19:39:05 +0200 [thread overview]
Message-ID: <20220306173905.22990-4-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20220306173905.22990-1-laurent.pinchart@ideasonboard.com>
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 +++-
arch/arm/boot/dts/omap3-n900.dts | 5 +++--
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 11 +++++++----
.../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 4 +++-
.../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 4 +++-
arch/arm/boot/dts/stm32429i-eval.dts | 3 ++-
arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
7 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..89234bbd02f4 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
//
// Copyright (C) 2015 Freescale Semiconductor, Inc.
+#include <dt-bindings/media/video-interfaces.h>
+
/ {
chosen {
stdout-path = &uart1;
@@ -170,7 +172,7 @@ &csi {
port {
parallel_from_ov5640: endpoint {
remote-endpoint = <&ov5640_to_parallel>;
- bus-type = <5>; /* Parallel bus */
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d40c3d2c4914..9cad9d6a83e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,6 +9,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -194,7 +195,7 @@ port@1 {
csi_isp: endpoint {
remote-endpoint = <&csi_cam1>;
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
@@ -835,7 +836,7 @@ cam1: camera@3e {
port {
csi_cam1: endpoint {
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
strobe = <1>;
clock-inv = <0>;
crc = <1>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..1043603fc4a5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
*/
/dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
#include "r8a7742-iwg21d-q7.dts"
/ {
@@ -242,7 +245,7 @@ port {
vin0ep: endpoint {
remote-endpoint = <&cam0ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -273,7 +276,7 @@ port {
vin1ep: endpoint {
remote-endpoint = <&cam1ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -305,7 +308,7 @@ vin2ep: endpoint {
remote-endpoint = <&cam2ep>;
bus-width = <8>;
data-shift = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
@@ -335,7 +338,7 @@ port {
vin3ep: endpoint {
remote-endpoint = <&cam3ep>;
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
};
};
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 40cef0b1d1e6..c73160df619d 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -26,7 +28,7 @@ port {
CAM_EP: endpoint {
bus-width = <8>;
data-shift = <2>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
pclk-sample = <1>;
remote-endpoint = <&VIN_EP>;
};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
index f5e77f024251..a7f5cfec64b8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -7,6 +7,8 @@
* Copyright (C) 2020 Renesas Electronics Corp.
*/
+#include <dt-bindings/media/video-interfaces.h>
+
#define CAM_ENABLED 1
&CAM_PARENT_I2C {
@@ -21,7 +23,7 @@ ov7725@21 {
port {
CAM_EP: endpoint {
bus-width = <8>;
- bus-type = <6>;
+ bus-type = <MEDIA_BUS_TYPE_BT656>;
remote-endpoint = <&VIN_EP>;
};
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..ecb10613d962 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov2640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e222d2d2cb44..24f59f3b15dc 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,6 +8,7 @@
#include "stm32mp157c-ed1.dts"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -90,7 +91,7 @@ &dcmi {
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_BT601>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
--
Regards,
Laurent Pinchart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-06 17:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-06 17:39 [PATCH v2 0/3] dt-bindings: Add macros for video interface bus types Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 17:39 ` [PATCH v2 1/3] dt-bindings: media: " Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 18:04 ` Laurent Pinchart
2022-03-06 18:04 ` Laurent Pinchart
2022-03-06 18:04 ` Laurent Pinchart
2022-03-08 23:18 ` Rob Herring
2022-03-08 23:18 ` Rob Herring
2022-03-08 23:18 ` Rob Herring
2022-03-06 17:39 ` [PATCH v2 2/3] dt-bindings: Use new video interface bus type macros in examples Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart [this message]
2022-03-06 17:39 ` [PATCH v2 3/3] ARM: dts: Use new media bus type macros Laurent Pinchart
2022-03-06 17:39 ` Laurent Pinchart
2022-04-07 12:41 ` Alexandre TORGUE
2022-04-07 12:41 ` Alexandre TORGUE
2022-04-07 12:41 ` Alexandre TORGUE
2022-04-07 13:31 ` Laurent Pinchart
2022-04-07 13:31 ` Laurent Pinchart
2022-04-07 13:31 ` Laurent Pinchart
2022-04-07 13:50 ` Alexandre TORGUE
2022-04-07 13:50 ` Alexandre TORGUE
2022-04-07 13:50 ` Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220306173905.22990-4-laurent.pinchart@ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eugen.hristev@microchip.com \
--cc=festevam@gmail.com \
--cc=hugues.fruchet@foss.st.com \
--cc=jacopo@jmondi.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.