[PATCH v2] arm64: dts: renesas: falcon-cpu: Use INTC_EX for SN65DSI86

[Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>]

The INTC block is a better choice for handling the interrupts on the V3U
as the INTC will always be powered, while the GPIO block may be
de-clocked if not in use. Further more, it may be likely to have a lower
power consumption as it does not need to drive the pins.

Switch the interrupt parent and interrupts definition from gpio1 to
irq0 on intc_ex, and configure the PFC accordingly.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

---
v2:

 - Define irq0_pins, and ensure pinctrl is set in the bridge node.
---
 arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 6af3f4f4f268..53c4a26198e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -192,14 +192,17 @@ &i2c1 {
 	clock-frequency = <400000>;
 
 	bridge@2c {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
 		compatible = "ti,sn65dsi86";
 		reg = <0x2c>;
 
 		clocks = <&sn65dsi86_refclk>;
 		clock-names = "refclk";
 
-		interrupt-parent = <&gpio1>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 
 		vccio-supply = <&reg_1p8v>;
 		vpll-supply = <&reg_1p8v>;
@@ -271,6 +274,11 @@ i2c6_pins: i2c6 {
 		function = "i2c6";
 	};
 
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
 	keys_pins: keys {
 		pins = "GP_6_18", "GP_6_19", "GP_6_20";
 		bias-pull-up;
-- 
2.32.0