From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Guillaume Nault <gnault@redhat.com>,
"David S . Miller" <davem@davemloft.net>,
Martin Varghese <martin.varghese@nokia.com>,
Hangbin Liu <liuhangbin@gmail.com>,
Jianlin Shi <jishi@redhat.com>
Subject: [PATCH net] bareudp: use ipv6_mod_enabled to check if IPv6 enabled
Date: Tue, 15 Mar 2022 14:26:18 +0800 [thread overview]
Message-ID: <20220315062618.156230-1-liuhangbin@gmail.com> (raw)
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled.
But if user start kernel with ipv6.disable=1, the bareudp sock will
created failed, which cause the interface open failed even with ethertype
ip. e.g.
# ip link add bareudp1 type bareudp dstport 2 ethertype ip
# ip link set bareudp1 up
RTNETLINK answers: Address family not supported by protocol
Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is
no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will
return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
drivers/net/bareudp.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index ba587e5fc24f..683203f87ae2 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -148,14 +148,14 @@ static int bareudp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
skb_reset_network_header(skb);
skb_reset_mac_header(skb);
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
err = IP_ECN_decapsulate(oiph, skb);
else
err = IP6_ECN_decapsulate(oiph, skb);
if (unlikely(err)) {
if (log_ecn_error) {
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
net_info_ratelimited("non-ECT from %pI4 "
"with TOS=%#x\n",
&((struct iphdr *)oiph)->saddr,
@@ -221,11 +221,12 @@ static struct socket *bareudp_create_sock(struct net *net, __be16 port)
int err;
memset(&udp_conf, 0, sizeof(udp_conf));
-#if IS_ENABLED(CONFIG_IPV6)
- udp_conf.family = AF_INET6;
-#else
- udp_conf.family = AF_INET;
-#endif
+
+ if (ipv6_mod_enabled())
+ udp_conf.family = AF_INET6;
+ else
+ udp_conf.family = AF_INET;
+
udp_conf.local_udp_port = port;
/* Open UDP socket */
err = udp_sock_create(net, &udp_conf, &sock);
@@ -448,7 +449,7 @@ static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
}
rcu_read_lock();
- if (IS_ENABLED(CONFIG_IPV6) && info->mode & IP_TUNNEL_INFO_IPV6)
+ if (ipv6_mod_enabled() && info->mode & IP_TUNNEL_INFO_IPV6)
err = bareudp6_xmit_skb(skb, dev, bareudp, info);
else
err = bareudp_xmit_skb(skb, dev, bareudp, info);
@@ -478,7 +479,7 @@ static int bareudp_fill_metadata_dst(struct net_device *dev,
use_cache = ip_tunnel_dst_cache_usable(skb, info);
- if (!IS_ENABLED(CONFIG_IPV6) || ip_tunnel_info_af(info) == AF_INET) {
+ if (!ipv6_mod_enabled() || ip_tunnel_info_af(info) == AF_INET) {
struct rtable *rt;
__be32 saddr;
--
2.35.1
next reply other threads:[~2022-03-15 6:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-15 6:26 Hangbin Liu [this message]
2022-03-17 2:30 ` [PATCH net] bareudp: use ipv6_mod_enabled to check if IPv6 enabled patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220315062618.156230-1-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=davem@davemloft.net \
--cc=gnault@redhat.com \
--cc=jishi@redhat.com \
--cc=martin.varghese@nokia.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.