[PATCH net-next] net: mscc: ocelot: fix build error due to missing IEEE_8021QAZ_MAX_TCS

From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	UNGLinuxDriver@microchip.com
Subject: [PATCH net-next] net: mscc: ocelot: fix build error due to missing IEEE_8021QAZ_MAX_TCS
Date: Tue, 15 Mar 2022 15:12:15 +0200	[thread overview]
Message-ID: <20220315131215.273450-1-vladimir.oltean@nxp.com> (raw)

IEEE_8021QAZ_MAX_TCS is defined in include/uapi/linux/dcbnl.h, which is
included by net/dcbnl.h. Then, linux/netdevice.h conditionally includes
net/dcbnl.h if CONFIG_DCB is enabled.

Therefore, when CONFIG_DCB is disabled, this indirect dependency is
broken.

There isn't a good reason to include net/dcbnl.h headers into the ocelot
switch library which exports low-level hardware API, so replace
IEEE_8021QAZ_MAX_TCS with OCELOT_NUM_TC which has the same value.

Fixes: 978777d0fb06 ("net: dsa: felix: configure default-prio and dscp priorities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/mscc/ocelot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 41dbb1e326c4..a26d613088ef 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2917,7 +2917,7 @@ EXPORT_SYMBOL_GPL(ocelot_port_get_default_prio);
 
 int ocelot_port_set_default_prio(struct ocelot *ocelot, int port, u8 prio)
 {
-	if (prio >= IEEE_8021QAZ_MAX_TCS)
+	if (prio >= OCELOT_NUM_TC)
 		return -ERANGE;
 
 	ocelot_rmw_gix(ocelot,
@@ -2959,7 +2959,7 @@ int ocelot_port_add_dscp_prio(struct ocelot *ocelot, int port, u8 dscp, u8 prio)
 {
 	int mask, val;
 
-	if (prio >= IEEE_8021QAZ_MAX_TCS)
+	if (prio >= OCELOT_NUM_TC)
 		return -ERANGE;
 
 	/* There is at least one app table priority (this one), so we need to
-- 
2.25.1

