[PATCH v4] pinctrl: ingenic: Fix regmap on X series SoCs

[Aidan MacDonald <aidanmacdonald.0x0@gmail.com>]

The X series Ingenic SoCs have a shadow GPIO group which is at a higher
offset than the other groups, and is used for all GPIO configuration.
The regmap did not take this offset into account and set max_register
too low, so the regmap API blocked writes to the shadow group, which
made the pinctrl driver unable to configure any pins.

Fix this by adding regmap access tables to the chip info. The way that
max_register was computed was also off by one, since max_register is an
inclusive bound, not an exclusive bound; this has been fixed.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
v1 -> v2: use regmap_access_table
v2 -> v3: compute max_register instead of putting it in chip_info
v3 -> v4: explain the fix to the max_register calculation

 drivers/pinctrl/pinctrl-ingenic.c | 46 ++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 2712f51eb238..fa6becca1788 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -119,6 +119,8 @@ struct ingenic_chip_info {
 	unsigned int num_functions;
 
 	const u32 *pull_ups, *pull_downs;
+
+	const struct regmap_access_table *access_table;
 };
 
 struct ingenic_pinctrl {
@@ -2179,6 +2181,17 @@ static const struct function_desc x1000_functions[] = {
 	{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
 };
 
+static const struct regmap_range x1000_access_ranges[] = {
+	regmap_reg_range(0x000, 0x400 - 4),
+	regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X1500 */
+static const struct regmap_access_table x1000_access_table = {
+	.yes_ranges = x1000_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
+};
+
 static const struct ingenic_chip_info x1000_chip_info = {
 	.num_chips = 4,
 	.reg_offset = 0x100,
@@ -2189,6 +2202,7 @@ static const struct ingenic_chip_info x1000_chip_info = {
 	.num_functions = ARRAY_SIZE(x1000_functions),
 	.pull_ups = x1000_pull_ups,
 	.pull_downs = x1000_pull_downs,
+	.access_table = &x1000_access_table,
 };
 
 static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
@@ -2300,6 +2314,7 @@ static const struct ingenic_chip_info x1500_chip_info = {
 	.num_functions = ARRAY_SIZE(x1500_functions),
 	.pull_ups = x1000_pull_ups,
 	.pull_downs = x1000_pull_downs,
+	.access_table = &x1000_access_table,
 };
 
 static const u32 x1830_pull_ups[4] = {
@@ -2506,6 +2521,16 @@ static const struct function_desc x1830_functions[] = {
 	{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
 };
 
+static const struct regmap_range x1830_access_ranges[] = {
+	regmap_reg_range(0x0000, 0x4000 - 4),
+	regmap_reg_range(0x7000, 0x8000 - 4),
+};
+
+static const struct regmap_access_table x1830_access_table = {
+	.yes_ranges = x1830_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
+};
+
 static const struct ingenic_chip_info x1830_chip_info = {
 	.num_chips = 4,
 	.reg_offset = 0x1000,
@@ -2516,6 +2541,7 @@ static const struct ingenic_chip_info x1830_chip_info = {
 	.num_functions = ARRAY_SIZE(x1830_functions),
 	.pull_ups = x1830_pull_ups,
 	.pull_downs = x1830_pull_downs,
+	.access_table = &x1830_access_table,
 };
 
 static const u32 x2000_pull_ups[5] = {
@@ -2969,6 +2995,17 @@ static const struct function_desc x2000_functions[] = {
 	{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
 };
 
+static const struct regmap_range x2000_access_ranges[] = {
+	regmap_reg_range(0x000, 0x500 - 4),
+	regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X2100 */
+static const struct regmap_access_table x2000_access_table = {
+	.yes_ranges = x2000_access_ranges,
+	.n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
+};
+
 static const struct ingenic_chip_info x2000_chip_info = {
 	.num_chips = 5,
 	.reg_offset = 0x100,
@@ -2979,6 +3016,7 @@ static const struct ingenic_chip_info x2000_chip_info = {
 	.num_functions = ARRAY_SIZE(x2000_functions),
 	.pull_ups = x2000_pull_ups,
 	.pull_downs = x2000_pull_downs,
+	.access_table = &x2000_access_table,
 };
 
 static const u32 x2100_pull_ups[5] = {
@@ -3189,6 +3227,7 @@ static const struct ingenic_chip_info x2100_chip_info = {
 	.num_functions = ARRAY_SIZE(x2100_functions),
 	.pull_ups = x2100_pull_ups,
 	.pull_downs = x2100_pull_downs,
+	.access_table = &x2000_access_table,
 };
 
 static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
@@ -4168,7 +4207,12 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 
 	regmap_config = ingenic_pinctrl_regmap_config;
-	regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
+	if (chip_info->access_table) {
+		regmap_config.rd_table = chip_info->access_table;
+		regmap_config.wr_table = chip_info->access_table;
+	} else {
+		regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset - 4;
+	}
 
 	jzpc->map = devm_regmap_init_mmio(dev, base, &regmap_config);
 	if (IS_ERR(jzpc->map)) {
-- 
2.34.1