All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Amir Goldstein <amir73il@gmail.com>
Cc: Trond Myklebust <trondmy@hammerspace.com>,
	Jan Kara <jack@suse.cz>,
	"bfields@fieldses.org" <bfields@fieldses.org>,
	"khazhy@google.com" <khazhy@google.com>,
	"chuck.lever@oracle.com" <chuck.lever@oracle.com>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	"linux-nfs@vger.kernel.org" <linux-nfs@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Jeff Layton <jlayton@kernel.org>
Subject: Re: [PATCH RFC] nfsd: avoid recursive locking through fsnotify
Date: Mon, 21 Mar 2022 12:23:10 +0100	[thread overview]
Message-ID: <20220321112310.vpr7oxro2xkz5llh@quack3.lan> (raw)
In-Reply-To: <CAOQ4uxgTJdcO-xZbtTSUkjD2g0vSHr=PLFc6-T6RgO0u5DS=0g@mail.gmail.com>

On Sat 19-03-22 11:36:13, Amir Goldstein wrote:
> On Sat, Mar 19, 2022 at 9:02 AM Trond Myklebust <trondmy@hammerspace.com> wrote:
> >
> > On Fri, 2022-03-18 at 17:16 -0700, Khazhismel Kumykov wrote:
> > > fsnotify_add_inode_mark may allocate with GFP_KERNEL, which may
> > > result
> > > in recursing back into nfsd, resulting in deadlock. See below stack.
> > >
> > > nfsd            D    0 1591536      2 0x80004080
> > > Call Trace:
> > >  __schedule+0x497/0x630
> > >  schedule+0x67/0x90
> > >  schedule_preempt_disabled+0xe/0x10
> > >  __mutex_lock+0x347/0x4b0
> > >  fsnotify_destroy_mark+0x22/0xa0
> > >  nfsd_file_free+0x79/0xd0 [nfsd]
> > >  nfsd_file_put_noref+0x7c/0x90 [nfsd]
> > >  nfsd_file_lru_dispose+0x6d/0xa0 [nfsd]
> > >  nfsd_file_lru_scan+0x57/0x80 [nfsd]
> > >  do_shrink_slab+0x1f2/0x330
> > >  shrink_slab+0x244/0x2f0
> > >  shrink_node+0xd7/0x490
> > >  do_try_to_free_pages+0x12f/0x3b0
> > >  try_to_free_pages+0x43f/0x540
> > >  __alloc_pages_slowpath+0x6ab/0x11c0
> > >  __alloc_pages_nodemask+0x274/0x2c0
> > >  alloc_slab_page+0x32/0x2e0
> > >  new_slab+0xa6/0x8b0
> > >  ___slab_alloc+0x34b/0x520
> > >  kmem_cache_alloc+0x1c4/0x250
> > >  fsnotify_add_mark_locked+0x18d/0x4c0
> > >  fsnotify_add_mark+0x48/0x70
> > >  nfsd_file_acquire+0x570/0x6f0 [nfsd]
> > >  nfsd_read+0xa7/0x1c0 [nfsd]
> > >  nfsd3_proc_read+0xc1/0x110 [nfsd]
> > >  nfsd_dispatch+0xf7/0x240 [nfsd]
> > >  svc_process_common+0x2f4/0x610 [sunrpc]
> > >  svc_process+0xf9/0x110 [sunrpc]
> > >  nfsd+0x10e/0x180 [nfsd]
> > >  kthread+0x130/0x140
> > >  ret_from_fork+0x35/0x40
> > >
> > > Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
> > > ---
> > >  fs/nfsd/filecache.c | 4 ++++
> > >  1 file changed, 4 insertions(+)
> > >
> > > Marking this RFC since I haven't actually had a chance to test this,
> > > we
> > > we're seeing this deadlock for some customers.
> > >
> > > diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
> > > index fdf89fcf1a0c..a14760f9b486 100644
> > > --- a/fs/nfsd/filecache.c
> > > +++ b/fs/nfsd/filecache.c
> > > @@ -121,6 +121,7 @@ nfsd_file_mark_find_or_create(struct nfsd_file
> > > *nf)
> > >         struct fsnotify_mark    *mark;
> > >         struct nfsd_file_mark   *nfm = NULL, *new;
> > >         struct inode *inode = nf->nf_inode;
> > > +       unsigned int pflags;
> > >
> > >         do {
> > >                 mutex_lock(&nfsd_file_fsnotify_group->mark_mutex);
> > > @@ -149,7 +150,10 @@ nfsd_file_mark_find_or_create(struct nfsd_file
> > > *nf)
> > >                 new->nfm_mark.mask = FS_ATTRIB|FS_DELETE_SELF;
> > >                 refcount_set(&new->nfm_ref, 1);
> > >
> > > +               /* fsnotify allocates, avoid recursion back into nfsd
> > > */
> > > +               pflags = memalloc_nofs_save();
> > >                 err = fsnotify_add_inode_mark(&new->nfm_mark, inode,
> > > 0);
> > > +               memalloc_nofs_restore(pflags);
> > >
> > >                 /*
> > >                  * If the add was successful, then return the object.
> >
> > Isn't that stack trace showing a slab direct reclaim, and not a
> > filesystem writeback situation?
> >
> > Does memalloc_nofs_save()/restore() really fix this problem? It seems
> > to me that it cannot, particularly since knfsd is not a filesystem, and
> > so does not ever handle writeback of dirty pages.
> >
> 
> Maybe NOFS throttles direct reclaims to the point that the problem is
> harder to hit?
> 
> This report came in at good timing for me.
> 
> It demonstrates an issue I did not predict for "volatile"' fanotify marks [1].
> As far as I can tell, nfsd filecache is currently the only fsnotify backend that
> frees fsnotify marks in memory shrinker. "volatile" fanotify marks would also
> be evictable in that way, so they would expose fanotify to this deadlock.
> 
> For the short term, maybe nfsd filecache can avoid the problem by checking
> mutex_is_locked(&nfsd_file_fsnotify_group->mark_mutex) and abort the
> shrinker. I wonder if there is a place for a helper mutex_is_locked_by_me()?
> 
> Jan,
> 
> A relatively simple fix would be to allocate fsnotify_mark_connector in
> fsnotify_add_mark() and free it, if a connector already exists for the object.
> I don't think there is a good reason to optimize away this allocation
> for the case of a non-first group to set a mark on an object?

Indeed, nasty. Volatile marks will add group->mark_mutex into a set of
locks grabbed during inode slab reclaim. So any allocation under
group->mark_mutex has to be GFP_NOFS now. This is not just about connector
allocations but also mark allocations for fanotify. Moving allocations from
under mark_mutex is also possible solution but passing preallocated memory
around is kind of ugly as well. So the cleanest solution I currently see is
to come up with helpers like "fsnotify_lock_group() &
fsnotify_unlock_group()" which will lock/unlock mark_mutex and also do
memalloc_nofs_save / restore magic. 

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

  reply	other threads:[~2022-03-21 11:23 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-19  0:16 [PATCH RFC] nfsd: avoid recursive locking through fsnotify Khazhismel Kumykov
2022-03-19  0:36 ` Trond Myklebust
2022-03-19  1:45   ` Khazhy Kumykov
2022-03-19  9:36   ` Amir Goldstein
2022-03-21 11:23     ` Jan Kara [this message]
2022-03-21 11:56       ` Amir Goldstein
2022-03-21 14:51         ` Jan Kara
2022-03-22 22:41           ` Amir Goldstein
2022-03-23 10:41             ` Jan Kara
2022-03-23 11:40               ` Amir Goldstein
2022-03-23 13:48                 ` Jan Kara
2022-03-23 14:00                   ` Amir Goldstein
2022-03-23 14:28                     ` Jan Kara
2022-03-23 15:46                       ` Amir Goldstein
2022-03-23 19:31                         ` Amir Goldstein
2022-03-24 19:17                         ` Amir Goldstein
2022-03-25  9:29                           ` Jan Kara
2022-03-27 18:14                             ` Amir Goldstein
2022-03-21 22:50       ` Trond Myklebust
2022-03-21 23:36         ` Khazhy Kumykov
2022-03-21 23:50           ` Trond Myklebust
2022-03-22 10:37         ` Jan Kara
2022-03-21 17:06     ` Khazhy Kumykov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220321112310.vpr7oxro2xkz5llh@quack3.lan \
    --to=jack@suse.cz \
    --cc=amir73il@gmail.com \
    --cc=bfields@fieldses.org \
    --cc=chuck.lever@oracle.com \
    --cc=jlayton@kernel.org \
    --cc=khazhy@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nfs@vger.kernel.org \
    --cc=trondmy@hammerspace.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.