All of lore.kernel.org
 help / color / mirror / Atom feed
From: cgel.zte@gmail.com
To: kvalo@kernel.org
Cc: davem@davemloft.net, kuba@kernel.org,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Minghao Chi <chi.minghao@zte.com.cn>,
	Zeal Robot <zealci@zte.com.cn>
Subject: [PATCH] wlcore: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
Date: Fri,  8 Apr 2022 08:12:05 +0000	[thread overview]
Message-ID: <20220408081205.2494512-1-chi.minghao@zte.com.cn> (raw)

From: Minghao Chi <chi.minghao@zte.com.cn>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
---
 drivers/net/wireless/ti/wlcore/debugfs.c | 52 ++++++++----------------
 1 file changed, 17 insertions(+), 35 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index cce8d75d8b81..eb3d3f0e0b4d 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -52,11 +52,9 @@ void wl1271_debugfs_update_stats(struct wl1271 *wl)
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	if (!wl->plt &&
 	    time_after(jiffies, wl->stats.fw_stats_update +
@@ -108,12 +106,9 @@ static void chip_op_handler(struct wl1271 *wl, unsigned long value,
 		return;
 	}
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
-
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		return;
-	}
 
 	chip_op = arg;
 	chip_op(wl);
@@ -279,11 +274,9 @@ static ssize_t dynamic_ps_timeout_write(struct file *file,
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	/* In case we're already in PSM, trigger it again to set new timeout
 	 * immediately without waiting for re-association
@@ -349,11 +342,9 @@ static ssize_t forced_ps_write(struct file *file,
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	/* In case we're already in PSM, trigger it again to switch mode
 	 * immediately without waiting for re-association
@@ -831,11 +822,9 @@ static ssize_t rx_streaming_interval_write(struct file *file,
 
 	wl->conf.rx_streaming.interval = value;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	wl12xx_for_each_wlvif_sta(wl, wlvif) {
 		wl1271_recalc_rx_streaming(wl, wlvif);
@@ -889,11 +878,9 @@ static ssize_t rx_streaming_always_write(struct file *file,
 
 	wl->conf.rx_streaming.always = value;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	wl12xx_for_each_wlvif_sta(wl, wlvif) {
 		wl1271_recalc_rx_streaming(wl, wlvif);
@@ -939,11 +926,9 @@ static ssize_t beacon_filtering_write(struct file *file,
 
 	mutex_lock(&wl->mutex);
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	wl12xx_for_each_wlvif(wl, wlvif) {
 		ret = wl1271_acx_beacon_filter_opt(wl, wlvif, !!value);
@@ -1021,11 +1006,9 @@ static ssize_t sleep_auth_write(struct file *file,
 		goto out;
 	}
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	ret = wl1271_acx_sleep_auth(wl, value);
 	if (ret < 0)
@@ -1254,9 +1237,8 @@ static ssize_t fw_logger_write(struct file *file,
 	}
 
 	mutex_lock(&wl->mutex);
-	ret = pm_runtime_get_sync(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
 		count = ret;
 		goto out;
 	}
-- 
2.25.1


             reply	other threads:[~2022-04-08  8:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-08  8:12 cgel.zte [this message]
2022-04-12  9:34 ` [PATCH] wlcore: using pm_runtime_resume_and_get instead of pm_runtime_get_sync Kalle Valo
2022-04-12 13:53 ` wlcore: debugfs: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Kalle Valo
2022-04-12  9:17 [PATCH] wlcore: using pm_runtime_resume_and_get instead of pm_runtime_get_sync cgel.zte
2022-04-12  9:33 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220408081205.2494512-1-chi.minghao@zte.com.cn \
    --to=cgel.zte@gmail.com \
    --cc=chi.minghao@zte.com.cn \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=zealci@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.