All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heming Zhao via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
To: ocfs2-devel@oss.oracle.com, joseph.qi@linux.alibaba.com
Subject: [Ocfs2-devel] [PATCH v2 5/5] ocfs2: rewrite error handling of ocfs2_fill_super
Date: Wed, 13 Apr 2022 16:29:57 +0800	[thread overview]
Message-ID: <20220413082957.28774-6-heming.zhao@suse.com> (raw)
In-Reply-To: <20220413082957.28774-1-heming.zhao@suse.com>

Current ocfs2_fill_super() uses one goto label "read_super_error" to
handle all error cases. And with previous serial patches, the error
handling should fork more branches to handle different error cases.
This patch rewrite the error handling of ocfs2_fill_super.

Signed-off-by: Heming Zhao <heming.zhao@suse.com>
---
 fs/ocfs2/super.c | 67 +++++++++++++++++++++++-------------------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 5e860d7162d7..72673d40d29c 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -989,28 +989,27 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 
 	if (!ocfs2_parse_options(sb, data, &parsed_options, 0)) {
 		status = -EINVAL;
-		goto read_super_error;
+		goto out;
 	}
 
 	/* probe for superblock */
 	status = ocfs2_sb_probe(sb, &bh, &sector_size, &stats);
 	if (status < 0) {
 		mlog(ML_ERROR, "superblock probe failed!\n");
-		goto read_super_error;
+		goto out;
 	}
 
 	status = ocfs2_initialize_super(sb, bh, sector_size, &stats);
-	osb = OCFS2_SB(sb);
-	if (status < 0) {
-		mlog_errno(status);
-		goto read_super_error;
-	}
 	brelse(bh);
 	bh = NULL;
+	if (status < 0)
+		goto out;
+
+	osb = OCFS2_SB(sb);
 
 	if (!ocfs2_check_set_options(sb, &parsed_options)) {
 		status = -EINVAL;
-		goto read_super_error;
+		goto out_super;
 	}
 	osb->s_mount_opt = parsed_options.mount_opt;
 	osb->s_atime_quantum = parsed_options.atime_quantum;
@@ -1027,7 +1026,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 
 	status = ocfs2_verify_userspace_stack(osb, &parsed_options);
 	if (status)
-		goto read_super_error;
+		goto out_super;
 
 	sb->s_magic = OCFS2_SUPER_MAGIC;
 
@@ -1041,7 +1040,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 			status = -EACCES;
 			mlog(ML_ERROR, "Readonly device detected but readonly "
 			     "mount was not specified.\n");
-			goto read_super_error;
+			goto out_super;
 		}
 
 		/* You should not be able to start a local heartbeat
@@ -1050,7 +1049,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 			status = -EROFS;
 			mlog(ML_ERROR, "Local heartbeat specified on readonly "
 			     "device.\n");
-			goto read_super_error;
+			goto out_super;
 		}
 
 		status = ocfs2_check_journals_nolocks(osb);
@@ -1059,9 +1058,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 				mlog(ML_ERROR, "Recovery required on readonly "
 				     "file system, but write access is "
 				     "unavailable.\n");
-			else
-				mlog_errno(status);
-			goto read_super_error;
+			goto out_super;
 		}
 
 		ocfs2_set_ro_flag(osb, 1);
@@ -1077,10 +1074,8 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	status = ocfs2_verify_heartbeat(osb);
-	if (status < 0) {
-		mlog_errno(status);
-		goto read_super_error;
-	}
+	if (status < 0)
+		goto out_super;
 
 	osb->osb_debug_root = debugfs_create_dir(osb->uuid_str,
 						 ocfs2_debugfs_root);
@@ -1094,15 +1089,14 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 
 	status = ocfs2_mount_volume(sb);
 	if (status < 0)
-		goto read_super_error;
+		goto out_debugfs;
 
 	if (osb->root_inode)
 		inode = igrab(osb->root_inode);
 
 	if (!inode) {
 		status = -EIO;
-		mlog_errno(status);
-		goto read_super_error;
+		goto out_dismount;
 	}
 
 	osb->osb_dev_kset = kset_create_and_add(sb->s_id, NULL,
@@ -1110,7 +1104,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	if (!osb->osb_dev_kset) {
 		status = -ENOMEM;
 		mlog(ML_ERROR, "Unable to create device kset %s.\n", sb->s_id);
-		goto read_super_error;
+		goto out_dismount;
 	}
 
 	/* Create filecheck sysfs related directories/files at
@@ -1119,14 +1113,13 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 		status = -ENOMEM;
 		mlog(ML_ERROR, "Unable to create filecheck sysfs directory at "
 			"/sys/fs/ocfs2/%s/filecheck.\n", sb->s_id);
-		goto read_super_error;
+		goto out_dismount;
 	}
 
 	root = d_make_root(inode);
 	if (!root) {
 		status = -ENOMEM;
-		mlog_errno(status);
-		goto read_super_error;
+		goto out_dismount;
 	}
 
 	sb->s_root = root;
@@ -1178,17 +1171,21 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 
 	return status;
 
-read_super_error:
-	brelse(bh);
-
-	if (status)
-		mlog_errno(status);
+out_dismount:
+	atomic_set(&osb->vol_state, VOLUME_DISABLED);
+	wake_up(&osb->osb_mount_event);
+	ocfs2_dismount_volume(sb, 1);
+	goto out;
 
-	if (osb) {
-		atomic_set(&osb->vol_state, VOLUME_DISABLED);
-		wake_up(&osb->osb_mount_event);
-		ocfs2_dismount_volume(sb, 1);
-	}
+out_debugfs:
+	debugfs_remove_recursive(osb->osb_debug_root);
+out_super:
+	ocfs2_release_system_inodes(osb);
+	kfree(osb->recovery_map);
+	ocfs2_delete_osb(osb);
+	kfree(osb);
+out:
+	mlog_errno(status);
 
 	return status;
 }
-- 
2.35.1


_______________________________________________
Ocfs2-devel mailing list
Ocfs2-devel@oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-devel

  parent reply	other threads:[~2022-04-13 13:47 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13  8:29 [Ocfs2-devel] [PATCH v2 0/5] rewrite error handling during mounting stage Heming Zhao via Ocfs2-devel
2022-04-13  8:29 ` [Ocfs2-devel] [PATCH v2 1/5] ocfs2: fix mounting crash if journal is not alloced Heming Zhao via Ocfs2-devel
2022-04-13 10:54   ` Joseph Qi via Ocfs2-devel
2022-04-13 13:18     ` heming.zhao--- via Ocfs2-devel
2022-04-13  8:29 ` [Ocfs2-devel] [PATCH v2 2/5] ocfs2: change return type of ocfs2_resmap_init Heming Zhao via Ocfs2-devel
2022-04-13 10:56   ` Joseph Qi via Ocfs2-devel
2022-04-13  8:29 ` [Ocfs2-devel] [PATCH v2 3/5] ocfs2: ocfs2_initialize_super does cleanup job before return error Heming Zhao via Ocfs2-devel
2022-04-13 11:02   ` Joseph Qi via Ocfs2-devel
2022-04-13  8:29 ` [Ocfs2-devel] [PATCH v2 4/5] ocfs2: ocfs2_mount_volume " Heming Zhao via Ocfs2-devel
2022-04-13 11:25   ` Joseph Qi via Ocfs2-devel
2022-04-14  9:14     ` heming.zhao--- via Ocfs2-devel
2022-04-13  8:29 ` Heming Zhao via Ocfs2-devel [this message]
2022-04-13 11:37   ` [Ocfs2-devel] [PATCH v2 5/5] ocfs2: rewrite error handling of ocfs2_fill_super Joseph Qi via Ocfs2-devel
2022-04-13 13:11     ` Heming Zhao via Ocfs2-devel
2022-04-14  1:47       ` Joseph Qi via Ocfs2-devel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413082957.28774-6-heming.zhao@suse.com \
    --to=ocfs2-devel@oss.oracle.com \
    --cc=heming.zhao@suse.com \
    --cc=joseph.qi@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.