[PATCH 2/2] spi: cadence-quadspi: allow operations with cmd/addr buswidth >1

[Matthias Schiffer <matthias.schiffer@ew.tq-group.com>]

With the improved cqspi_set_protocol(), ops with cmd/addr
buswidth >1 are now working correctly.

Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash using 1-4-4
operations.

DTR operations are currently untested, so we leave them disabled for now
(except for the previosly allowed 8-8-8 ops).

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
 drivers/spi/spi-cadence-quadspi.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 96d14f3847b5..08f39f52e32a 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1370,13 +1370,7 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem,
 			return false;
 		if (op->data.nbytes && op->data.buswidth != 8)
 			return false;
-	} else if (all_false) {
-		/* Only 1-1-X ops are supported without DTR */
-		if (op->cmd.nbytes && op->cmd.buswidth > 1)
-			return false;
-		if (op->addr.nbytes && op->addr.buswidth > 1)
-			return false;
-	} else {
+	} else if (!all_false) {
 		/* Mixed DTR modes are not supported. */
 		return false;
 	}
-- 
2.25.1