From: Alexandre Torgue <alexandre.torgue@foss.st.com> To: <arnd@arndb.de>, <robh+dt@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, <soc@kernel.org>, Stephen Boyd <sboyd@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, Alexandre Torgue <alexandre.torgue@foss.st.com>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-kernel@vger.kernel.org>, Marek Vasut <marex@denx.de>, Ahmad Fatoum <a.fatoum@pengutronix.de>, <etienne.carriere@st.com> Subject: [PATCH 4/8] dt-bindings: reset: stm32mp15: rename RST_SCMI define Date: Fri, 22 Apr 2022 17:09:48 +0200 [thread overview] Message-ID: <20220422150952.20587-5-alexandre.torgue@foss.st.com> (raw) In-Reply-To: <20220422150952.20587-1-alexandre.torgue@foss.st.com> As we only have one SCMI instance, it's not necessary to add an index to the name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h index f3a0ed317835..4ffa7c3612e6 100644 --- a/include/dt-bindings/reset/stm32mp1-resets.h +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -107,17 +107,17 @@ #define GPIOK_R 19786 /* SCMI reset domain identifiers */ -#define RST_SCMI0_SPI6 0 -#define RST_SCMI0_I2C4 1 -#define RST_SCMI0_I2C6 2 -#define RST_SCMI0_USART1 3 -#define RST_SCMI0_STGEN 4 -#define RST_SCMI0_GPIOZ 5 -#define RST_SCMI0_CRYP1 6 -#define RST_SCMI0_HASH1 7 -#define RST_SCMI0_RNG1 8 -#define RST_SCMI0_MDMA 9 -#define RST_SCMI0_MCU 10 -#define RST_SCMI0_MCU_HOLD_BOOT 11 +#define RST_SCMI_SPI6 0 +#define RST_SCMI_I2C4 1 +#define RST_SCMI_I2C6 2 +#define RST_SCMI_USART1 3 +#define RST_SCMI_STGEN 4 +#define RST_SCMI_GPIOZ 5 +#define RST_SCMI_CRYP1 6 +#define RST_SCMI_HASH1 7 +#define RST_SCMI_RNG1 8 +#define RST_SCMI_MDMA 9 +#define RST_SCMI_MCU 10 +#define RST_SCMI_MCU_HOLD_BOOT 11 #endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */ -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Torgue <alexandre.torgue@foss.st.com> To: <arnd@arndb.de>, <robh+dt@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, <soc@kernel.org>, Stephen Boyd <sboyd@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, Alexandre Torgue <alexandre.torgue@foss.st.com>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-kernel@vger.kernel.org>, Marek Vasut <marex@denx.de>, Ahmad Fatoum <a.fatoum@pengutronix.de>, <etienne.carriere@st.com> Subject: [PATCH 4/8] dt-bindings: reset: stm32mp15: rename RST_SCMI define Date: Fri, 22 Apr 2022 17:09:48 +0200 [thread overview] Message-ID: <20220422150952.20587-5-alexandre.torgue@foss.st.com> (raw) In-Reply-To: <20220422150952.20587-1-alexandre.torgue@foss.st.com> As we only have one SCMI instance, it's not necessary to add an index to the name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h index f3a0ed317835..4ffa7c3612e6 100644 --- a/include/dt-bindings/reset/stm32mp1-resets.h +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -107,17 +107,17 @@ #define GPIOK_R 19786 /* SCMI reset domain identifiers */ -#define RST_SCMI0_SPI6 0 -#define RST_SCMI0_I2C4 1 -#define RST_SCMI0_I2C6 2 -#define RST_SCMI0_USART1 3 -#define RST_SCMI0_STGEN 4 -#define RST_SCMI0_GPIOZ 5 -#define RST_SCMI0_CRYP1 6 -#define RST_SCMI0_HASH1 7 -#define RST_SCMI0_RNG1 8 -#define RST_SCMI0_MDMA 9 -#define RST_SCMI0_MCU 10 -#define RST_SCMI0_MCU_HOLD_BOOT 11 +#define RST_SCMI_SPI6 0 +#define RST_SCMI_I2C4 1 +#define RST_SCMI_I2C6 2 +#define RST_SCMI_USART1 3 +#define RST_SCMI_STGEN 4 +#define RST_SCMI_GPIOZ 5 +#define RST_SCMI_CRYP1 6 +#define RST_SCMI_HASH1 7 +#define RST_SCMI_RNG1 8 +#define RST_SCMI_MDMA 9 +#define RST_SCMI_MCU 10 +#define RST_SCMI_MCU_HOLD_BOOT 11 #endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */ -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-04-22 15:10 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-22 15:09 [PATCH 0/8] Add SCMI version of ST boards Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-04-22 15:09 ` [PATCH 1/8] dt-bindings: rcc: Add optional external ethernet RX clock properties Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-04-22 16:28 ` Marek Vasut 2022-04-22 16:28 ` Marek Vasut 2022-04-25 17:21 ` Alexandre TORGUE 2022-04-25 17:21 ` Alexandre TORGUE 2022-04-22 15:09 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Alexandre Torgue 2022-04-22 15:09 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st, stm32mp1-rcc-secure" Alexandre Torgue 2022-04-22 16:31 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Marek Vasut 2022-04-22 16:31 ` Marek Vasut 2022-04-25 19:11 ` Rob Herring 2022-04-25 19:11 ` Rob Herring 2022-04-25 19:35 ` Marek Vasut 2022-04-25 19:35 ` Marek Vasut 2022-04-26 18:44 ` Rob Herring 2022-04-26 18:44 ` Rob Herring 2022-05-02 21:13 ` Rob Herring 2022-05-02 21:13 ` Rob Herring 2022-05-05 14:11 ` Rob Herring 2022-05-05 14:11 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st, stm32mp1-rcc-secure" Rob Herring 2022-05-06 10:02 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Alexandre TORGUE 2022-05-06 10:02 ` Alexandre TORGUE 2022-05-06 16:21 ` Rob Herring 2022-05-06 16:21 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st, stm32mp1-rcc-secure" Rob Herring 2022-05-09 12:36 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Rob Herring 2022-05-09 12:36 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st, stm32mp1-rcc-secure" Rob Herring 2022-05-09 12:55 ` [PATCH 2/8] dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" Alexandre TORGUE 2022-05-09 12:55 ` Alexandre TORGUE 2022-04-22 15:09 ` [PATCH 3/8] dt-bindings: clock: stm32mp15: rename CK_SCMI define Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-05-02 21:26 ` Rob Herring 2022-05-02 21:26 ` Rob Herring 2022-04-22 15:09 ` Alexandre Torgue [this message] 2022-04-22 15:09 ` [PATCH 4/8] dt-bindings: reset: stm32mp15: rename RST_SCMI define Alexandre Torgue 2022-05-02 21:27 ` Rob Herring 2022-05-02 21:27 ` Rob Herring 2022-04-22 15:09 ` [PATCH 5/8] ARM: stm32: select OPTEE on MPU family Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-04-22 15:37 ` Ahmad Fatoum 2022-04-22 15:37 ` Ahmad Fatoum 2022-04-22 16:23 ` Alexandre TORGUE 2022-04-22 16:23 ` Alexandre TORGUE 2022-04-22 15:09 ` [PATCH 6/8] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-04-22 16:32 ` Marek Vasut 2022-04-22 16:32 ` Marek Vasut 2022-04-25 10:19 ` Etienne CARRIERE 2022-04-25 10:19 ` Etienne CARRIERE 2022-04-25 10:25 ` Marek Vasut 2022-04-25 10:25 ` Marek Vasut 2022-04-25 10:30 ` Rouven Czerwinski 2022-04-25 10:30 ` Rouven Czerwinski 2022-04-22 15:09 ` [PATCH 7/8] dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-05-02 21:28 ` Rob Herring 2022-05-02 21:28 ` Rob Herring 2022-04-22 15:09 ` [PATCH 8/8] ARM: dts: " Alexandre Torgue 2022-04-22 15:09 ` Alexandre Torgue 2022-05-03 14:51 ` [PATCH 0/8] Add SCMI version of ST boards Alexandre TORGUE 2022-05-03 14:51 ` Alexandre TORGUE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220422150952.20587-5-alexandre.torgue@foss.st.com \ --to=alexandre.torgue@foss.st.com \ --cc=a.fatoum@pengutronix.de \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=etienne.carriere@st.com \ --cc=krzk+dt@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=marex@denx.de \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.