From: Marcel Ziswiler <marcel@ziswiler.com> To: linux-arm-kernel@lists.infradead.org Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Alexander Stein <alexander.stein@ew.tq-group.com>, Arnd Bergmann <arnd@arndb.de>, Denys Drozdov <denys.drozdov@toradex.com>, Fabio Estevam <festevam@gmail.com>, Frank Rowand <frowand.list@gmail.com>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Li Yang <leoyang.li@nxp.com>, Lucas Stach <l.stach@pengutronix.de>, Marek Vasut <marex@denx.de>, Matthias Schiffer <matthias.schiffer@tq-group.com>, Max Krummenacher <max.krummenacher@toradex.com>, NXP Linux Team <linux-imx@nxp.com>, Olof Johansson <olof@lixom.net>, Pengutronix Kernel Team <kernel@pengutronix.de>, Rob Herring <robh+dt@kernel.org>, Russell King <linux@armlinux.org.uk>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, Tim Harvey <tharvey@gateworks.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, soc@kernel.org Subject: [PATCH v2 00/14] ARM: dts: imx6ull-colibri: device tree improvements Date: Mon, 25 Apr 2022 18:23:42 +0200 [thread overview] Message-ID: <20220425162356.176665-1-marcel@ziswiler.com> (raw) From: Marcel Ziswiler <marcel.ziswiler@toradex.com> This is a general update of the Colibri iMX6ULL device tree files. The Toradex Colibri family is composed of a SoM that can be plugged on various carrier boards, with carrier boards allowing multiple optional accessories (e.g. display, camera, ...). The device tree sources are structured into a SoM dtsi and a carrier dts which then includes the SoM dtsi. The SoM dtsi defines and enables the functionality self-contained on the SoM and prepares for the functionality provided by the carrier HW or accessories so that the carrier dts then can enable or amend nodes provided. Accessories are enabled in overlays depending on HW configuration. Please find the following colibri-imx6ull device trees improvements: - MMC/SD The original Colibri specification only defined 3.3 volt TTL signaling and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. The latest carrier boards like Iris V2 on the other hand are now UHS-I compliant by leaving such external on-carrier pull-ups away relying on module- or even SoC-level ones which pull up to resp. signaling voltage. In such cases, the carrier board-level device tree may explicitly delete the no-1-8-v property to enable full UHS-I support. Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. - FEC Provide a proper phy-supply for the FEC, actually switched by the 50 Mhz RMII interface clock using a regulator-fixed-clock that is now properly stated. The reference commit for such regulator can be found at commit 8959e5324485 ("regulator: fixed: add possibility to enable by clock"). - I2C Switched on 22 kOhm pull-ups and lower the I2C frequency to 40 kHz to get more reliable communication. - Atmel Touchscreen The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT peripherals available on the I2C bus for touchscreen events. Add atmel_mxt_ts node to the module-level device tree. Also, provide pinmux configuration for the INT/RST inputs from SODIMM pins 106/107 for most carrier boards or an external touchscreen adapter inputs configured to SODIMM pins 28/30. Changes in v2: - Fixed pinctrl node names as suggested by Shawn. - Fixed long line as pointed out by Rob's bot. - Added V3 to Colibri Evaluation Board as done elsewhere. - Fix alphabetical node order as suggested by Shawn. - Dropped [PATCH v1 02/14] ARM: dts: imx6ull-colibri: fix vqmmc regulator which already got applied by Shawn. Thanks! - New commit with pinctrl node name improvements as suggested by Shawn. Denys Drozdov (5): ARM: dts: imx6ull-colibri: add touchscreen device nodes ARM: dts: imx6ull-colibri: update device trees to support overlays dt-bindings: arm: fsl: add toradex,colibri-imx6ull ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards Marcel Ziswiler (4): ARM: dts: imx6ull-colibri: fix nand bch geometry ARM: dts: imx6ull-colibri: add/update some comments ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi ARM: dts: imx6ull-colibri: improve pinctrl node names Max Krummenacher (1): ARM: dts: imx6ull-colibri: change touch i2c parameters Oleksandr Suvorov (1): ARM: dts: imx6ull-colibri: add gpio-line-names Philippe Schenker (3): ARM: dts: imx6ull-colibri: use pull-down for adc pins ARM: dts: imx6ull-colibri: add phy-supply to fec ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling .../devicetree/bindings/arm/fsl.yaml | 25 +- arch/arm/boot/dts/Makefile | 9 + arch/arm/boot/dts/imx6ull-colibri-aster.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-aster.dtsi | 145 +++++++++ .../boot/dts/imx6ull-colibri-emmc-aster.dts | 17 ++ .../boot/dts/imx6ull-colibri-emmc-iris-v2.dts | 17 ++ .../boot/dts/imx6ull-colibri-emmc-iris.dts | 17 ++ .../dts/imx6ull-colibri-emmc-nonwifi.dtsi | 8 +- arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts | 6 +- .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 63 +--- arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts | 28 ++ .../arm/boot/dts/imx6ull-colibri-iris-v2.dtsi | 27 ++ arch/arm/boot/dts/imx6ull-colibri-iris.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-iris.dtsi | 132 ++++++++ .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 145 ++++++++- .../boot/dts/imx6ull-colibri-wifi-aster.dts | 20 ++ .../boot/dts/imx6ull-colibri-wifi-eval-v3.dts | 4 +- .../boot/dts/imx6ull-colibri-wifi-iris-v2.dts | 28 ++ .../boot/dts/imx6ull-colibri-wifi-iris.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 144 ++++++++- arch/arm/boot/dts/imx6ull-colibri.dtsi | 285 ++++++++++++------ 21 files changed, 1008 insertions(+), 172 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ull-colibri-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-aster.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Marcel Ziswiler <marcel@ziswiler.com> To: linux-arm-kernel@lists.infradead.org Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Alexander Stein <alexander.stein@ew.tq-group.com>, Arnd Bergmann <arnd@arndb.de>, Denys Drozdov <denys.drozdov@toradex.com>, Fabio Estevam <festevam@gmail.com>, Frank Rowand <frowand.list@gmail.com>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Li Yang <leoyang.li@nxp.com>, Lucas Stach <l.stach@pengutronix.de>, Marek Vasut <marex@denx.de>, Matthias Schiffer <matthias.schiffer@tq-group.com>, Max Krummenacher <max.krummenacher@toradex.com>, NXP Linux Team <linux-imx@nxp.com>, Olof Johansson <olof@lixom.net>, Pengutronix Kernel Team <kernel@pengutronix.de>, Rob Herring <robh+dt@kernel.org>, Russell King <linux@armlinux.org.uk>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, Tim Harvey <tharvey@gateworks.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, soc@kernel.org Subject: [PATCH v2 00/14] ARM: dts: imx6ull-colibri: device tree improvements Date: Mon, 25 Apr 2022 18:23:42 +0200 [thread overview] Message-ID: <20220425162356.176665-1-marcel@ziswiler.com> (raw) From: Marcel Ziswiler <marcel.ziswiler@toradex.com> This is a general update of the Colibri iMX6ULL device tree files. The Toradex Colibri family is composed of a SoM that can be plugged on various carrier boards, with carrier boards allowing multiple optional accessories (e.g. display, camera, ...). The device tree sources are structured into a SoM dtsi and a carrier dts which then includes the SoM dtsi. The SoM dtsi defines and enables the functionality self-contained on the SoM and prepares for the functionality provided by the carrier HW or accessories so that the carrier dts then can enable or amend nodes provided. Accessories are enabled in overlays depending on HW configuration. Please find the following colibri-imx6ull device trees improvements: - MMC/SD The original Colibri specification only defined 3.3 volt TTL signaling and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. The latest carrier boards like Iris V2 on the other hand are now UHS-I compliant by leaving such external on-carrier pull-ups away relying on module- or even SoC-level ones which pull up to resp. signaling voltage. In such cases, the carrier board-level device tree may explicitly delete the no-1-8-v property to enable full UHS-I support. Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. - FEC Provide a proper phy-supply for the FEC, actually switched by the 50 Mhz RMII interface clock using a regulator-fixed-clock that is now properly stated. The reference commit for such regulator can be found at commit 8959e5324485 ("regulator: fixed: add possibility to enable by clock"). - I2C Switched on 22 kOhm pull-ups and lower the I2C frequency to 40 kHz to get more reliable communication. - Atmel Touchscreen The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT peripherals available on the I2C bus for touchscreen events. Add atmel_mxt_ts node to the module-level device tree. Also, provide pinmux configuration for the INT/RST inputs from SODIMM pins 106/107 for most carrier boards or an external touchscreen adapter inputs configured to SODIMM pins 28/30. Changes in v2: - Fixed pinctrl node names as suggested by Shawn. - Fixed long line as pointed out by Rob's bot. - Added V3 to Colibri Evaluation Board as done elsewhere. - Fix alphabetical node order as suggested by Shawn. - Dropped [PATCH v1 02/14] ARM: dts: imx6ull-colibri: fix vqmmc regulator which already got applied by Shawn. Thanks! - New commit with pinctrl node name improvements as suggested by Shawn. Denys Drozdov (5): ARM: dts: imx6ull-colibri: add touchscreen device nodes ARM: dts: imx6ull-colibri: update device trees to support overlays dt-bindings: arm: fsl: add toradex,colibri-imx6ull ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards Marcel Ziswiler (4): ARM: dts: imx6ull-colibri: fix nand bch geometry ARM: dts: imx6ull-colibri: add/update some comments ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi ARM: dts: imx6ull-colibri: improve pinctrl node names Max Krummenacher (1): ARM: dts: imx6ull-colibri: change touch i2c parameters Oleksandr Suvorov (1): ARM: dts: imx6ull-colibri: add gpio-line-names Philippe Schenker (3): ARM: dts: imx6ull-colibri: use pull-down for adc pins ARM: dts: imx6ull-colibri: add phy-supply to fec ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling .../devicetree/bindings/arm/fsl.yaml | 25 +- arch/arm/boot/dts/Makefile | 9 + arch/arm/boot/dts/imx6ull-colibri-aster.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-aster.dtsi | 145 +++++++++ .../boot/dts/imx6ull-colibri-emmc-aster.dts | 17 ++ .../boot/dts/imx6ull-colibri-emmc-iris-v2.dts | 17 ++ .../boot/dts/imx6ull-colibri-emmc-iris.dts | 17 ++ .../dts/imx6ull-colibri-emmc-nonwifi.dtsi | 8 +- arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts | 6 +- .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 63 +--- arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts | 28 ++ .../arm/boot/dts/imx6ull-colibri-iris-v2.dtsi | 27 ++ arch/arm/boot/dts/imx6ull-colibri-iris.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-iris.dtsi | 132 ++++++++ .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 145 ++++++++- .../boot/dts/imx6ull-colibri-wifi-aster.dts | 20 ++ .../boot/dts/imx6ull-colibri-wifi-eval-v3.dts | 4 +- .../boot/dts/imx6ull-colibri-wifi-iris-v2.dts | 28 ++ .../boot/dts/imx6ull-colibri-wifi-iris.dts | 20 ++ arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 144 ++++++++- arch/arm/boot/dts/imx6ull-colibri.dtsi | 285 ++++++++++++------ 21 files changed, 1008 insertions(+), 172 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ull-colibri-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-aster.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-iris.dtsi create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts -- 2.35.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-04-25 16:25 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-25 16:23 Marcel Ziswiler [this message] 2022-04-25 16:23 ` [PATCH v2 00/14] ARM: dts: imx6ull-colibri: device tree improvements Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 01/14] ARM: dts: imx6ull-colibri: use pull-down for adc pins Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 02/14] ARM: dts: imx6ull-colibri: change touch i2c parameters Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 03/14] ARM: dts: imx6ull-colibri: add phy-supply to fec Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 04/14] ARM: dts: imx6ull-colibri: add touchscreen device nodes Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 05/14] ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 06/14] ARM: dts: imx6ull-colibri: update device trees to support overlays Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 07/14] ARM: dts: imx6ull-colibri: add gpio-line-names Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 08/14] dt-bindings: arm: fsl: add toradex,colibri-imx6ull Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-05-02 23:59 ` Rob Herring 2022-05-02 23:59 ` Rob Herring 2022-05-05 2:42 ` Shawn Guo 2022-05-05 2:42 ` Shawn Guo 2022-04-25 16:23 ` [PATCH v2 09/14] ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 10/14] ARM: dts: imx6ull-colibri: add support for toradex aster " Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 11/14] ARM: dts: imx6ull-colibri: fix nand bch geometry Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 12/14] ARM: dts: imx6ull-colibri: add/update some comments Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 13/14] ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-04-25 16:23 ` [PATCH v2 14/14] ARM: dts: imx6ull-colibri: improve pinctrl node names Marcel Ziswiler 2022-04-25 16:23 ` Marcel Ziswiler 2022-05-05 2:47 ` [PATCH v2 00/14] ARM: dts: imx6ull-colibri: device tree improvements Shawn Guo 2022-05-05 2:47 ` Shawn Guo 2022-05-05 8:56 ` Marcel Ziswiler 2022-05-05 8:56 ` Marcel Ziswiler 2022-05-06 13:44 ` Marcel Ziswiler 2022-05-06 13:44 ` Marcel Ziswiler
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220425162356.176665-1-marcel@ziswiler.com \ --to=marcel@ziswiler.com \ --cc=alexander.stein@ew.tq-group.com \ --cc=arnd@arndb.de \ --cc=denys.drozdov@toradex.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=frowand.list@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzk+dt@kernel.org \ --cc=l.stach@pengutronix.de \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=marcel.ziswiler@toradex.com \ --cc=marex@denx.de \ --cc=matthias.schiffer@tq-group.com \ --cc=max.krummenacher@toradex.com \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ --cc=tharvey@gateworks.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.