All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marty E. Plummer" <hanetzer@startmail.com>
To: arnd@arndb.de, cai.huoqing@linux.dev, christian.koenig@amd.com,
	devicetree@vger.kernel.org, gengdongjiu@huawei.com,
	hanetzer@startmail.com, krzysztof.kozlowski+dt@linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
	linux@armlinux.org.uk, michael@walle.cc,
	miquel.raynal@bootlin.com, mturquette@baylibre.com,
	novikov@ispras.ru, olof@lixom.net, p.yadav@ti.com,
	rdunlap@infradead.org, richard@nod.at, robh+dt@kernel.org,
	sboyd@kernel.org, soc@kernel.org, sumit.semwal@linaro.org,
	tudor.ambarus@microchip.com, vigneshr@ti.com,
	xuwei5@hisilicon.com
Subject: [RFC v2 1/2] clk: hisilicon: add CRG driver Hi3521a SoC
Date: Sun,  1 May 2022 12:34:22 -0500	[thread overview]
Message-ID: <20220501173423.2473093-2-hanetzer@startmail.com> (raw)
In-Reply-To: <20220501173423.2473093-1-hanetzer@startmail.com>

Add CRG driver for Hi3521A SoC. CRG (Clock and Reset Generator) module
generates clock and reset signals used by other module blocks on SoC.

Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
---
 drivers/clk/hisilicon/Kconfig             |   8 ++
 drivers/clk/hisilicon/Makefile            |   1 +
 drivers/clk/hisilicon/crg-hi3521a.c       | 141 ++++++++++++++++++++++
 include/dt-bindings/clock/hi3521a-clock.h |  34 ++++++
 4 files changed, 184 insertions(+)
 create mode 100644 drivers/clk/hisilicon/crg-hi3521a.c
 create mode 100644 include/dt-bindings/clock/hi3521a-clock.h

diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
index c1ec75aa4ccd..72435c06bf4d 100644
--- a/drivers/clk/hisilicon/Kconfig
+++ b/drivers/clk/hisilicon/Kconfig
@@ -15,6 +15,14 @@ config COMMON_CLK_HI3519
 	help
 	  Build the clock driver for hi3519.
 
+config COMMON_CLK_HI3521A
+	tristate "Hi3521a Clock Driver"
+	depends on ARCH_HISI || COMPILE_TEST
+	select RESET_HISI
+	default ARCH_HISI
+	help
+	  Build the clock driver for hi3521a.
+
 config COMMON_CLK_HI3559A
 	bool "Hi3559A Clock Driver"
 	depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
index 2978e56cb876..dc27acc5b885 100644
--- a/drivers/clk/hisilicon/Makefile
+++ b/drivers/clk/hisilicon/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_HIP04)	+= clk-hip04.o
 obj-$(CONFIG_ARCH_HIX5HD2)	+= clk-hix5hd2.o
 obj-$(CONFIG_COMMON_CLK_HI3516CV300)	+= crg-hi3516cv300.o
 obj-$(CONFIG_COMMON_CLK_HI3519)	+= clk-hi3519.o
+obj-$(CONFIG_COMMON_CLK_HI3521A)	+= crg-hi3521a.o
 obj-$(CONFIG_COMMON_CLK_HI3559A)	+= clk-hi3559a.o
 obj-$(CONFIG_COMMON_CLK_HI3660) += clk-hi3660.o
 obj-$(CONFIG_COMMON_CLK_HI3670) += clk-hi3670.o
diff --git a/drivers/clk/hisilicon/crg-hi3521a.c b/drivers/clk/hisilicon/crg-hi3521a.c
new file mode 100644
index 000000000000..42d8ff440f07
--- /dev/null
+++ b/drivers/clk/hisilicon/crg-hi3521a.c
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier:	GPL-2.0-or-later */
+/*
+ * Copyright (C) 2017-2022 Marty E. Plummer <hanetzer@startmail.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/hi3521a-clock.h>
+
+#include "clk.h"
+#include "crg.h"
+#include "reset.h"
+
+#define HI3521A_INNER_CLK_OFFSET	64
+#define HI3521A_FIXED_2M			65
+#define HI3521A_FIXED_24M			66
+#define HI3521A_FIXED_50M			67
+#define HI3521A_FIXED_83M			68
+#define HI3521A_FIXED_100M			69
+#define HI3521A_FIXED_150M			70
+#define HI3521A_FIXED_202P5M		71
+#define HI3521A_FIXED_250M			72
+#define HI3521A_SYSAXI_MUX			73
+#define HI3521A_FMC_MUX				74
+#define HI3521A_UART_MUX			75
+#define HI3521A_SP804_CLK			76
+
+#define HI3521A_NR_CLKS				128
+
+static const struct hisi_fixed_rate_clock hi3521a_fixed_rate_clks[] = {
+	{ HI3521A_FIXED_2M,         "2m", NULL, 0,   2000000, },
+	{ HI3521A_FIXED_3M,         "3m", NULL, 0,   3000000, },
+	{ HI3521A_FIXED_24M,       "24m", NULL, 0,  24000000, },
+	{ HI3521A_FIXED_50M,       "50m", NULL, 0,  50000000, },
+	{ HI3521A_FIXED_83M,       "83m", NULL, 0,  83000000, },
+	{ HI3521A_FIXED_100M,     "100m", NULL, 0, 100000000, },
+	{ HI3521A_FIXED_150M,     "150m", NULL, 0, 150000000, },
+	{ HI3521A_FIXED_202P5M, "202p5m", NULL, 0, 202500000, },
+	{ HI3521A_FIXED_250M,     "250m", NULL, 0, 250000000, },
+};
+
+static const char *const sysaxi_mux_p[] = { "24m", "250m", "202p5m", };
+static const char *const uart_mux_p[] = { "apb", "2m", "24m", };
+static const char *const fmc_mux_p[] = { "24m", "83m", "150m", };
+static const char *const timer_mux_p[] = { "3m", "clk_sp804", };
+
+static const u32 sysaxi_mux_table[] = {0, 1, 2};
+static const u32 uart_mux_table[] = {0, 1, 2};
+static const u32 fmc_mux_table[] = {0, 1, 2};
+static const u32 timer_mux_table[] = {0, 1};
+
+static const struct hisi_mux_clock hi3521a_mux_clks[] = {
+	{ HI3521A_APB_CLK, "apb", sysaxi_mux_p, ARRAY_SIZE(sysaxi_mux_p),
+		CLK_SET_RATE_PARENT, 0x34, 12, 2, 0, sysaxi_mux_table, },
+	{ HI3521A_UART_MUX, "uart_mux", uart_mux_p, ARRAY_SIZE(uart_mux_p),
+		CLK_SET_RATE_PARENT, 0x84, 18, 2, 0, uart_mux_table, },
+	{ HI3521A_FMC_MUX, "fmc_mux", fmc_mux_p, ARRAY_SIZE(fmc_mux_p),
+		CLK_SET_RATE_PARENT, 0x74, 2, 2, 0, fmc_mux_table, },
+};
+
+static const struct hisi_gate_clock hi3521a_gate_clks[] = {
+	{ HI3521A_FMC_CLK, "clk_fmc", "fmc_mux", CLK_SET_RATE_PARENT,
+		0x74, 1, 0, },
+	{ HI3521A_ETH_CLK, "clk_eth", NULL, 0, 0x78, 1, 0, },
+	{ HI3521A_ETH_MACIF_CLK, "clk_eth_macif", NULL, 0x78, 3, 0, },
+	{ HI3521A_DMAC_CLK, "clk_dmac", NULL, 0, 0x80, 5, 0, },
+	{ HI3521A_UART0_CLK, "clk_uart0", "uart_mux", CLK_SET_RATE_PARENT,
+		0x84, 15, 0, },
+	{ HI3521A_UART1_CLK, "clk_uart1", "uart_mux", CLK_SET_RATE_PARENT,
+		0x84, 16, 0, },
+	{ HI3521A_UART2_CLK, "clk_uart2", "uart_mux", CLK_SET_RATE_PARENT,
+		0x84, 17, 0, },
+	{ HI3521A_SPI0_CLK, "clk_spi0", "50m", CLK_SET_RATE_PARENT,
+		0x84, 13, 0, },
+};
+
+static const struct hisi_fixed_factor_clock hi3521a_fixed_factor_clks[] = {
+	{ HI3521A_SP804_CLK, "clk_sp804", "apb", 1, 4, CLK_SET_RATE_PARENT },
+};
+
+static void __init hi3521a_crg_init(struct device_node *np)
+{
+	struct hisi_clock_data *clk_data;
+
+	clk_data = hisi_clk_init(np, HI3521A_NR_CLKS);
+	if (!clk_data)
+		return;
+
+	hisi_clk_register_fixed_rate(hi3521a_fixed_rate_clks,
+				ARRAY_SIZE(hi3521a_fixed_rate_clks),
+				clk_data);
+	hisi_clk_register_mux(hi3521a_mux_clks,
+				ARRAY_SIZE(hi3521a_mux_clks),
+				clk_data);
+	hisi_clk_register_gate(hi3521a_gate_clks,
+				ARRAY_SIZE(hi3521a_gate_clks),
+				clk_data);
+	hisi_clk_register_fixed_factor(hi3521a_fixed_factor_clks,
+				ARRAY_SIZE(hi3521a_fixed_factor_clks),
+				clk_data);
+}
+CLK_OF_DECLARE(hi3521a_clk, "hisilicon,hi3521a-crg", hi3521a_crg_init);
+
+#define HI3521A_SYSCTRL_NR_CLKS 16
+
+static const struct hisi_mux_clock hi3521a_sysctrl_mux_clks[] = {
+	{ HI3521A_TIMER0_CLK, "clk_timer0", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 16, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER1_CLK, "clk_timer1", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 18, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER2_CLK, "clk_timer2", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 20, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER3_CLK, "clk_timer3", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 22, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER4_CLK, "clk_timer4", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 25, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER5_CLK, "clk_timer5", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 27, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER6_CLK, "clk_timer6", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 29, 1, 0, timer_mux_table, },
+	{ HI3521A_TIMER7_CLK, "clk_timer7", timer_mux_p, ARRAY_SIZE(timer_mux_p),
+		CLK_SET_RATE_PARENT, 0, 31, 1, 0, timer_mux_table, },
+};
+
+static void __init hi3521a_sysctrl_init(struct device_node *np)
+{
+	struct hisi_clock_data *clk_data;
+
+	clk_data = hisi_clk_init(np, HI3521A_SYSCTRL_NR_CLKS);
+	if (!clk_data)
+		return;
+
+	hisi_clk_register_mux(hi3521a_sysctrl_mux_clks,
+				ARRAY_SIZE(hi3521a_sysctrl_mux_clks),
+				clk_data);
+}
+CLK_OF_DECLARE(hi3521a_sysctrl, "hisilicon,hi3521a-sysctrl", hi3521a_sysctrl_init);
diff --git a/include/dt-bindings/clock/hi3521a-clock.h b/include/dt-bindings/clock/hi3521a-clock.h
new file mode 100644
index 000000000000..416a08079002
--- /dev/null
+++ b/include/dt-bindings/clock/hi3521a-clock.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier:	GPL-2.0-or-later */
+/*
+ * Copyright (C) 2017-2022 Marty E. Plummer <hanetzer@startmail.com>
+ */
+
+#ifndef __DTS_HI3521A_CLOCK_H
+#define __DTS_HI3521A_CLOCK_H
+
+/* clocks provided by the crg */
+#define HI3521A_FIXED_3M		1
+#define HI3521A_FMC_CLK			2
+#define HI3521A_SPI0_CLK		3
+#define HI3521A_UART0_CLK		4
+#define HI3521A_UART1_CLK		5
+#define HI3521A_UART2_CLK		6
+#define HI3521A_DMAC_CLK		7
+#define HI3521A_IR_CLK			8
+#define HI3521A_ETH_CLK			9
+#define HI3521A_ETH_MACIF_CLK	10
+#define HI3521A_USB2_BUS_CLK	11
+#define HI3521A_USB2_PORT_CLK	12
+#define HI3521A_APB_CLK			13
+
+/* clocks provided by the sysctrl */
+#define HI3521A_TIMER0_CLK		1
+#define HI3521A_TIMER1_CLK		2
+#define HI3521A_TIMER2_CLK		3
+#define HI3521A_TIMER3_CLK		4
+#define HI3521A_TIMER4_CLK		5
+#define HI3521A_TIMER5_CLK		6
+#define HI3521A_TIMER6_CLK		7
+#define HI3521A_TIMER7_CLK		8
+
+#endif /* __DTS_HI3521A_CLK_H */
-- 
2.35.1


  reply	other threads:[~2022-05-01 17:34 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-01  5:44 [PATCH 0/2] Hi3521a support Marty E. Plummer
2022-05-01  5:44 ` Marty E. Plummer
2022-05-01 17:34 ` [RFC v2 " Marty E. Plummer
2022-05-01 17:34   ` Marty E. Plummer [this message]
2022-05-03 11:37     ` [RFC v2 1/2] clk: hisilicon: add CRG driver Hi3521a SoC Krzysztof Kozlowski
2022-05-03 11:37       ` Krzysztof Kozlowski
2022-05-03 11:37       ` Krzysztof Kozlowski
2022-06-01 10:58       ` Marty E. Plummer
2022-06-01 10:58         ` Marty E. Plummer
2022-06-01 10:58         ` Marty E. Plummer
2022-06-01 11:00         ` Krzysztof Kozlowski
2022-06-01 11:00           ` Krzysztof Kozlowski
2022-06-01 11:00           ` Krzysztof Kozlowski
2022-06-01 11:06           ` Marty E. Plummer
2022-06-01 11:06             ` Marty E. Plummer
2022-06-01 11:06             ` Marty E. Plummer
2022-06-01 11:09             ` Krzysztof Kozlowski
2022-06-01 11:09               ` Krzysztof Kozlowski
2022-06-01 11:09               ` Krzysztof Kozlowski
2022-06-01 18:24               ` Marty E. Plummer
2022-06-01 18:24                 ` Marty E. Plummer
2022-06-01 18:24                 ` Marty E. Plummer
2022-06-02  6:37                 ` Krzysztof Kozlowski
2022-06-02  6:37                   ` Krzysztof Kozlowski
2022-06-02  6:37                   ` Krzysztof Kozlowski
2022-06-03 11:22                   ` Marty E. Plummer
2022-06-03 11:22                     ` Marty E. Plummer
2022-06-03 11:22                     ` Marty E. Plummer
2022-06-05 14:54                     ` Krzysztof Kozlowski
2022-06-05 14:54                       ` Krzysztof Kozlowski
2022-06-05 14:54                       ` Krzysztof Kozlowski
2022-06-06  7:29                       ` Krzysztof Kozlowski
2022-06-06  7:29                         ` Krzysztof Kozlowski
2022-06-06  7:29                         ` Krzysztof Kozlowski
2022-06-06 11:34                         ` Marty E. Plummer
2022-06-06 11:34                           ` Marty E. Plummer
2022-06-06 11:34                           ` Marty E. Plummer
2022-05-01 17:34   ` [RFC v2 2/2] arm: hisi: enable Hi3521a soc Marty E. Plummer
2022-05-03 11:47     ` Krzysztof Kozlowski
2022-05-03 11:47       ` Krzysztof Kozlowski
2022-05-03 11:47       ` Krzysztof Kozlowski
2022-05-03 13:44       ` Marty E. Plummer
2022-05-03 13:44         ` Marty E. Plummer
2022-05-03 13:44         ` Marty E. Plummer
2022-05-03 14:55         ` Krzysztof Kozlowski
2022-05-03 14:55           ` Krzysztof Kozlowski
2022-05-03 14:55           ` Krzysztof Kozlowski
2022-05-03 15:51           ` Marty E. Plummer
2022-05-03 15:51             ` Marty E. Plummer
2022-05-03 15:51             ` Marty E. Plummer
2022-05-03 15:57             ` Krzysztof Kozlowski
2022-05-03 15:57               ` Krzysztof Kozlowski
2022-05-03 15:57               ` Krzysztof Kozlowski
2022-05-03 11:37   ` [RFC v2 0/2] Hi3521a support Krzysztof Kozlowski
2022-05-03 11:37     ` Krzysztof Kozlowski
2022-05-03 11:37     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220501173423.2473093-2-hanetzer@startmail.com \
    --to=hanetzer@startmail.com \
    --cc=arnd@arndb.de \
    --cc=cai.huoqing@linux.dev \
    --cc=christian.koenig@amd.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gengdongjiu@huawei.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=novikov@ispras.ru \
    --cc=olof@lixom.net \
    --cc=p.yadav@ti.com \
    --cc=rdunlap@infradead.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.