From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kbuild@vger.kernel.org
Cc: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
Nicolas Schier <nicolas@fjasle.eu>,
Masahiro Yamada <masahiroy@kernel.org>
Subject: [PATCH v2] kbuild: factor out the common installation code into scripts/install.sh
Date: Tue, 3 May 2022 11:47:16 +0900 [thread overview]
Message-ID: <20220503024716.76666-1-masahiroy@kernel.org> (raw)
Many architectures have similar install.sh scripts.
The first half is really generic; verifies that the kernel image and
System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific. It just copies the kernel image
and System.map to the destination, but the code is slightly different.
This patch factors out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Changes in v2:
- Move the installkernel parameters to scripts/install.sh
Makefile | 3 ++-
arch/arm/Makefile | 4 ++--
arch/arm/boot/install.sh | 21 ------------------
arch/arm64/Makefile | 6 ++----
arch/arm64/boot/install.sh | 21 ------------------
arch/ia64/Makefile | 3 ++-
arch/ia64/install.sh | 10 ---------
arch/m68k/Makefile | 3 ++-
arch/m68k/install.sh | 22 -------------------
arch/nios2/Makefile | 3 +--
arch/nios2/boot/install.sh | 22 -------------------
arch/parisc/Makefile | 11 +++++-----
arch/parisc/install.sh | 28 ------------------------
arch/powerpc/Makefile | 3 +--
arch/powerpc/boot/install.sh | 23 --------------------
arch/riscv/Makefile | 7 +++---
arch/riscv/boot/install.sh | 21 ------------------
arch/s390/Makefile | 3 +--
arch/s390/boot/install.sh | 6 ------
arch/sparc/Makefile | 3 +--
arch/sparc/boot/install.sh | 22 -------------------
arch/x86/Makefile | 3 +--
arch/x86/boot/install.sh | 22 -------------------
scripts/install.sh | 41 ++++++++++++++++++++++++++++++++++++
24 files changed, 64 insertions(+), 247 deletions(-)
mode change 100644 => 100755 arch/arm/boot/install.sh
mode change 100644 => 100755 arch/arm64/boot/install.sh
mode change 100644 => 100755 arch/ia64/install.sh
mode change 100644 => 100755 arch/m68k/install.sh
mode change 100644 => 100755 arch/nios2/boot/install.sh
mode change 100644 => 100755 arch/parisc/install.sh
mode change 100644 => 100755 arch/powerpc/boot/install.sh
mode change 100644 => 100755 arch/riscv/boot/install.sh
mode change 100644 => 100755 arch/s390/boot/install.sh
mode change 100644 => 100755 arch/sparc/boot/install.sh
mode change 100644 => 100755 arch/x86/boot/install.sh
create mode 100755 scripts/install.sh
diff --git a/Makefile b/Makefile
index 9a60f732bb3c..154c32af8805 100644
--- a/Makefile
+++ b/Makefile
@@ -1298,7 +1298,8 @@ scripts_unifdef: scripts_basic
# to this Makefile to build and install external modules.
# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
-install: sub_make_done :=
+quiet_cmd_install = INSTALL $(INSTALL_PATH)
+ cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
# ---------------------------------------------------------------------------
# Tools
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2391b8de5a5..187f4b2c5c73 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -318,9 +318,9 @@ $(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
@$(kecho) ' Kernel: $(boot)/$@ is ready'
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
$(INSTALL_TARGETS):
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
- $(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
old mode 100644
new mode 100755
index 2a45092a40e3..9ec11fac7d8d
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/arm/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "zImage" ]; then
# Compressed install
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 2f1de88651e6..6d9d4a58b898 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -162,11 +162,9 @@ Image: vmlinux
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-install: install-image := Image
-zinstall: install-image := Image.gz
+install: KBUILD_IMAGE := $(boot)/Image
install zinstall:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
old mode 100644
new mode 100755
index d91e1f022573..7399d706967a
--- a/arch/arm64/boot/install.sh
+++ b/arch/arm64/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/arm64/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "Image.gz" ]; then
# Compressed install
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 6c4bfa54b703..e55c2f138656 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -72,8 +72,9 @@ archheaders:
CLEAN_FILES += vmlinux.gz
+install: KBUILD_IMAGE := vmlinux.gz
install:
- sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
define archhelp
echo '* compressed - Build compressed kernel image'
diff --git a/arch/ia64/install.sh b/arch/ia64/install.sh
old mode 100644
new mode 100755
index 0e932f5dcd1a..2d4b66a9f362
--- a/arch/ia64/install.sh
+++ b/arch/ia64/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/ia64/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -17,14 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 740fc97b9c0f..e358605b70ba 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -138,5 +138,6 @@ CLEAN_FILES += vmlinux.gz vmlinux.bz2
archheaders:
$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
+install: KBUILD_IMAGE := vmlinux.gz
install:
- sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
diff --git a/arch/m68k/install.sh b/arch/m68k/install.sh
old mode 100644
new mode 100755
index 57d640d4382c..af65e16e5147
--- a/arch/m68k/install.sh
+++ b/arch/m68k/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index 02d678559066..d6a7499b814c 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -56,8 +56,7 @@ $(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
install:
- sh $(srctree)/$(nios2-boot)/install.sh $(KERNELRELEASE) \
- $(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
define archhelp
echo '* vmImage - Kernel-only image for U-Boot ($(KBUILD_IMAGE))'
diff --git a/arch/nios2/boot/install.sh b/arch/nios2/boot/install.sh
old mode 100644
new mode 100755
index 3cb3f468bc51..34a2feec42c8
--- a/arch/nios2/boot/install.sh
+++ b/arch/nios2/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 7583fc39ab2d..aca1710fd658 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -184,12 +184,11 @@ vdso_install:
$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
$(if $(CONFIG_COMPAT_VDSO), \
$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
-install:
- $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
- $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
-zinstall:
- $(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
- $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
+
+install: KBUILD_IMAGE := vmlinux
+zinstall: KBUILD_IMAGE := vmlinuz
+install zinstall:
+ $(call cmd,install)
CLEAN_FILES += lifimage
MRPROPER_FILES += palo.conf
diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
old mode 100644
new mode 100755
index 70d3cffb0251..933d031c249a
--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/parisc/install.sh, derived from arch/i386/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -17,32 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -n "${INSTALLKERNEL}" ]; then
- if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
- if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
- if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
-fi
-
-# Default install
if [ "$(basename $2)" = "vmlinuz" ]; then
# Compressed install
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index eb541e730d3c..45a9caa37b4e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -408,8 +408,7 @@ endef
PHONY += install
install:
- sh -x $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" vmlinux \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
old mode 100644
new mode 100755
index 14473150ddb4..461902c8a46d
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -15,32 +15,9 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-# Bail with error code if anything goes wrong
set -e
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install
-
# this should work for both the pSeries zImage and the iSeries vmlinux.sm
image_name=`basename $2`
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 7d81102cffd4..2b93ca9f4fc3 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -139,11 +139,10 @@ $(BOOT_TARGETS): vmlinux
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-install: install-image = Image
-zinstall: install-image = Image.gz
+install: KBUILD_IMAGE := $(boot)/Image
+zinstall: KBUILD_IMAGE := $(boot)/Image.gz
install zinstall:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(boot)/$(install-image) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += rv32_randconfig
rv32_randconfig:
diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
old mode 100644
new mode 100755
index 18c39159c0ff..4c63f3f0643d
--- a/arch/riscv/boot/install.sh
+++ b/arch/riscv/boot/install.sh
@@ -1,7 +1,5 @@
#!/bin/sh
#
-# arch/riscv/boot/install.sh
-#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
@@ -18,25 +16,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "Image.gz" ]; then
# Compressed install
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 7a65bca1e5af..cc2425539ef0 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -128,8 +128,7 @@ all: bzImage
KBUILD_IMAGE := $(boot)/bzImage
install:
- sh -x $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
diff --git a/arch/s390/boot/install.sh b/arch/s390/boot/install.sh
old mode 100644
new mode 100755
index 515b27a996b3..616ba1660f08
--- a/arch/s390/boot/install.sh
+++ b/arch/s390/boot/install.sh
@@ -14,12 +14,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
echo "Warning: '${INSTALLKERNEL}' command not available - additional " \
"bootloader config required" >&2
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index c7008bbebc4c..fe58a410b4ce 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -72,8 +72,7 @@ image zImage uImage tftpboot.img vmlinux.aout: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
install:
- sh $(srctree)/$(boot)/install.sh $(KERNELRELEASE) $(KBUILD_IMAGE) \
- System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
archheaders:
$(Q)$(MAKE) $(build)=arch/sparc/kernel/syscalls all
diff --git a/arch/sparc/boot/install.sh b/arch/sparc/boot/install.sh
old mode 100644
new mode 100755
index b32851eae693..4f130f3f30d6
--- a/arch/sparc/boot/install.sh
+++ b/arch/sparc/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 63d50f65b828..5e1f21aae12b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -271,8 +271,7 @@ $(BOOT_TARGETS): vmlinux
PHONY += install
install:
- $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
- $(KBUILD_IMAGE) System.map "$(INSTALL_PATH)"
+ $(call cmd,install)
PHONY += vdso_install
vdso_install:
diff --git a/arch/x86/boot/install.sh b/arch/x86/boot/install.sh
old mode 100644
new mode 100755
index d13ec1c38640..0849f4b42745
--- a/arch/x86/boot/install.sh
+++ b/arch/x86/boot/install.sh
@@ -15,28 +15,6 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-#
-
-verify () {
- if [ ! -f "$1" ]; then
- echo "" 1>&2
- echo " *** Missing file: $1" 1>&2
- echo ' *** You need to run "make" before "make install".' 1>&2
- echo "" 1>&2
- exit 1
- fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-# Default install - same as make zlilo
if [ -f $4/vmlinuz ]; then
mv $4/vmlinuz $4/vmlinuz.old
diff --git a/scripts/install.sh b/scripts/install.sh
new file mode 100755
index 000000000000..88c56250f669
--- /dev/null
+++ b/scripts/install.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Common code factored out by Masahiro Yamada
+
+set -e
+
+# Make sure the files actually exist
+for file in "${KBUILD_IMAGE}" System.map
+do
+ if [ ! -f "${file}" ]; then
+ echo >&2
+ echo >&2 " *** Missing file: ${file}"
+ echo >&2 ' *** You need to run "make" before "make install".'
+ echo >&2
+ exit 1
+ fi
+done
+
+# installkernel(8) says the parameters are like follows:
+#
+# installkernel version zImage System.map [directory]
+
+set -- "${KERNELRELEASE}" "${KBUILD_IMAGE}" System.map "${INSTALL_PATH}"
+
+# User/arch may have a custom install script
+for file in "${HOME}/bin/${INSTALLKERNEL}" \
+ "/sbin/${INSTALLKERNEL}" \
+ "${srctree}/arch/${SRCARCH}/install.sh" \
+ "${srctree}/arch/${SRCARCH}/boot/install.sh"
+do
+ if [ -x "${file}" ]; then
+ exec "${file}" "$@"
+ fi
+done
+
+echo "No install script found" >&2
+exit 1
--
2.32.0
next reply other threads:[~2022-05-03 2:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 2:47 Masahiro Yamada [this message]
2022-05-10 10:04 ` [PATCH v2] kbuild: factor out the common installation code into scripts/install.sh Nicolas Schier
2022-05-10 12:56 ` Masahiro Yamada
2022-05-10 13:21 ` Nicolas Schier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220503024716.76666-1-masahiroy@kernel.org \
--to=masahiroy@kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas@fjasle.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.