From: Florian Fainelli <f.fainelli@gmail.com> To: soc@kernel.org Cc: "SHIMAMOTO Takayoshi" <takayoshi.shimamoto.360@gmail.com>, "Florian Fainelli" <f.fainelli@gmail.com>, "William Zhang" <william.zhang@broadcom.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>, "Phil Elwell" <phil@raspberrypi.com>, "Stefan Wahren" <stefan.wahren@i2se.com>, "Arınç ÜNAL" <arinc.unal@arinc9.com>, "Rafał Miłecki" <rafal@milecki.pl>, "Kuldeep Singh" <singh.kuldeep87k@gmail.com>, "Oleksij Rempel" <linux@rempel-privat.de>, "Oleksij Rempel" <o.rempel@pengutronix.de>, linux-arm-kernel@lists.infradead.org, arnd@arndb.de, olof@lixom.net, khilman@kernel.org, bcm-kernel-feedback-list@broadcom.com Subject: [GIT PULL 2/6] Broadcom devicetree changes for 5.19 Date: Wed, 4 May 2022 14:09:38 -0700 [thread overview] Message-ID: <20220504210942.1838248-2-f.fainelli@gmail.com> (raw) In-Reply-To: <20220504210942.1838248-1-f.fainelli@gmail.com> The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17: Linux 5.18-rc1 (2022-04-03 14:08:21 -0700) are available in the Git repository at: https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.19/devicetree for you to fetch changes up to 417aea4436bb658d8c5c4dcd0e3c255931d0ee96: ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2 (2022-05-03 15:02:11 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.19, please pull the following: - Oleksij fixes the ethernet node name for the USB Ethernet adapter on BCM283x (Raspberry Pi 1/2/3) platforms - Kuldeep fixes the PL022 SPI controller clock names to conform to the binding - Rafal updates the various BCM5301X (Northstar) Device Tree include files to be dtsschema conforming for pinctrl, NAND - Arinc adds the Asus RT-AC88U binding, removes some unnecessary properties of the Ethernet switch DT node, populates the correct PHY interface for port 5 of the switch, adds support for fetching the MAC address from the NVMEM provider and finally disables gmac0 on that device which is unused - Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio line names conforming to the printed circuit board layout - Krzysztof updates various Broadcom DTS files to have a conforming SPI nor Device Tree node - Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2 wireless routers based on the BCM4708 SoC - William adds support for the BCM47622 ARMv7 Broadband SoC and provides a basic DTS to boot upstream Linux on such a system ---------------------------------------------------------------- Arınç ÜNAL (9): ARM: dts: BCM5301X: Fix DTC warning for NAND node ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings dt-bindings: arm: bcm: create new description for BCM53016 ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC dt-bindings: arm: bcm: add bindings for Asus RT-AC88U ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U Krzysztof Kozlowski (1): ARM: dts: broadcom: align SPI NOR node name with dtschema Kuldeep Singh (1): ARM: dts: bcm-cygnus: Update spi clock properties Oleksij Rempel (1): ARM: dts: bcm283x: fix ethernet node name Phil Elwell (4): ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED ARM: dts: bcm283x: Align ETH_CLK GPIO line name Rafał Miłecki (1): ARM: dts: BCM5301X: Update pin controller node name SHIMAMOTO Takayoshi (1): ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2 Stefan Wahren (2): ARM: dts: bcm2835-rpi-b: Fix GPIO line names ARM: dts: bcm283x: Remove gpio line name NC William Zhang (2): dt-bindings: arm: add bcmbca device tree binding document ARM: dts: add dts files for bcmbca soc 47622 .../devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 10 +- .../devicetree/bindings/arm/bcm/brcm,bcmbca.yaml | 33 ++++ arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/bcm-cygnus.dtsi | 12 +- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 21 ++- arch/arm/boot/dts/bcm2835-rpi-a.dts | 35 ++-- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 19 +- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 35 ++-- arch/arm/boot/dts/bcm2835-rpi-b.dts | 48 +++--- arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 1 - arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 25 +-- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 29 ++-- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 3 +- arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 - arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 5 +- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 3 +- arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 5 +- arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 12 +- arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- .../dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 192 +++++++++++++++++++++ arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts | 26 +++ arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts | 26 +++ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 19 +- arch/arm/boot/dts/bcm47622.dtsi | 126 ++++++++++++++ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 2 +- arch/arm/boot/dts/bcm947622.dts | 30 ++++ arch/arm/boot/dts/bcm953012er.dts | 2 +- arch/arm/boot/dts/bcm953012hr.dts | 2 +- arch/arm/boot/dts/bcm953012k.dts | 2 +- arch/arm/boot/dts/bcm958522er.dts | 2 +- arch/arm/boot/dts/bcm958525er.dts | 2 +- arch/arm/boot/dts/bcm958525xmc.dts | 2 +- arch/arm/boot/dts/bcm958622hr.dts | 2 +- arch/arm/boot/dts/bcm958623hr.dts | 2 +- arch/arm/boot/dts/bcm958625hr.dts | 2 +- arch/arm/boot/dts/bcm958625k.dts | 2 +- arch/arm/boot/dts/bcm988312hr.dts | 2 +- 41 files changed, 596 insertions(+), 158 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts create mode 100644 arch/arm/boot/dts/bcm47622.dtsi create mode 100644 arch/arm/boot/dts/bcm947622.dts
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com> To: soc@kernel.org Cc: "SHIMAMOTO Takayoshi" <takayoshi.shimamoto.360@gmail.com>, "Florian Fainelli" <f.fainelli@gmail.com>, "William Zhang" <william.zhang@broadcom.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>, "Phil Elwell" <phil@raspberrypi.com>, "Stefan Wahren" <stefan.wahren@i2se.com>, "Arınç ÜNAL" <arinc.unal@arinc9.com>, "Rafał Miłecki" <rafal@milecki.pl>, "Kuldeep Singh" <singh.kuldeep87k@gmail.com>, "Oleksij Rempel" <linux@rempel-privat.de>, "Oleksij Rempel" <o.rempel@pengutronix.de>, linux-arm-kernel@lists.infradead.org, arnd@arndb.de, olof@lixom.net, khilman@kernel.org, bcm-kernel-feedback-list@broadcom.com Subject: [GIT PULL 2/6] Broadcom devicetree changes for 5.19 Date: Wed, 4 May 2022 14:09:38 -0700 [thread overview] Message-ID: <20220504210942.1838248-2-f.fainelli@gmail.com> (raw) In-Reply-To: <20220504210942.1838248-1-f.fainelli@gmail.com> The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17: Linux 5.18-rc1 (2022-04-03 14:08:21 -0700) are available in the Git repository at: https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.19/devicetree for you to fetch changes up to 417aea4436bb658d8c5c4dcd0e3c255931d0ee96: ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2 (2022-05-03 15:02:11 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.19, please pull the following: - Oleksij fixes the ethernet node name for the USB Ethernet adapter on BCM283x (Raspberry Pi 1/2/3) platforms - Kuldeep fixes the PL022 SPI controller clock names to conform to the binding - Rafal updates the various BCM5301X (Northstar) Device Tree include files to be dtsschema conforming for pinctrl, NAND - Arinc adds the Asus RT-AC88U binding, removes some unnecessary properties of the Ethernet switch DT node, populates the correct PHY interface for port 5 of the switch, adds support for fetching the MAC address from the NVMEM provider and finally disables gmac0 on that device which is unused - Phil updates the Raspberry Pi 1/2/3 DTS files to have the latest gpio line names conforming to the printed circuit board layout - Krzysztof updates various Broadcom DTS files to have a conforming SPI nor Device Tree node - Takayoshi adds support for the Buffalo WZR-1166DHP/WZR-1166DHP2 wireless routers based on the BCM4708 SoC - William adds support for the BCM47622 ARMv7 Broadband SoC and provides a basic DTS to boot upstream Linux on such a system ---------------------------------------------------------------- Arınç ÜNAL (9): ARM: dts: BCM5301X: Fix DTC warning for NAND node ARM: dts: BCM5301X: Remove cell properties from srab ports on Asus RT-AC88U ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on Asus RT-AC88U ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on Asus RT-AC88U dt-bindings: arm: bcm: fix BCM53012 and BCM53016 SoC strings dt-bindings: arm: bcm: create new description for BCM53016 ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and BCM53016 SoC dt-bindings: arm: bcm: add bindings for Asus RT-AC88U ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus RT-AC88U Krzysztof Kozlowski (1): ARM: dts: broadcom: align SPI NOR node name with dtschema Kuldeep Singh (1): ARM: dts: bcm-cygnus: Update spi clock properties Oleksij Rempel (1): ARM: dts: bcm283x: fix ethernet node name Phil Elwell (4): ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED ARM: dts: bcm283x: Align ETH_CLK GPIO line name Rafał Miłecki (1): ARM: dts: BCM5301X: Update pin controller node name SHIMAMOTO Takayoshi (1): ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2 Stefan Wahren (2): ARM: dts: bcm2835-rpi-b: Fix GPIO line names ARM: dts: bcm283x: Remove gpio line name NC William Zhang (2): dt-bindings: arm: add bcmbca device tree binding document ARM: dts: add dts files for bcmbca soc 47622 .../devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 10 +- .../devicetree/bindings/arm/bcm/brcm,bcmbca.yaml | 33 ++++ arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/bcm-cygnus.dtsi | 12 +- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 21 ++- arch/arm/boot/dts/bcm2835-rpi-a.dts | 35 ++-- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 19 +- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 35 ++-- arch/arm/boot/dts/bcm2835-rpi-b.dts | 48 +++--- arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 1 - arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 25 +-- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 29 ++-- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 3 +- arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 1 - arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 5 +- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 3 +- arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 5 +- arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 12 +- arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- .../dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 192 +++++++++++++++++++++ arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts | 26 +++ arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts | 26 +++ arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 19 +- arch/arm/boot/dts/bcm47622.dtsi | 126 ++++++++++++++ arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 - arch/arm/boot/dts/bcm5301x.dtsi | 2 +- arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 2 +- arch/arm/boot/dts/bcm947622.dts | 30 ++++ arch/arm/boot/dts/bcm953012er.dts | 2 +- arch/arm/boot/dts/bcm953012hr.dts | 2 +- arch/arm/boot/dts/bcm953012k.dts | 2 +- arch/arm/boot/dts/bcm958522er.dts | 2 +- arch/arm/boot/dts/bcm958525er.dts | 2 +- arch/arm/boot/dts/bcm958525xmc.dts | 2 +- arch/arm/boot/dts/bcm958622hr.dts | 2 +- arch/arm/boot/dts/bcm958623hr.dts | 2 +- arch/arm/boot/dts/bcm958625hr.dts | 2 +- arch/arm/boot/dts/bcm958625k.dts | 2 +- arch/arm/boot/dts/bcm988312hr.dts | 2 +- 41 files changed, 596 insertions(+), 158 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts create mode 100644 arch/arm/boot/dts/bcm47622.dtsi create mode 100644 arch/arm/boot/dts/bcm947622.dts _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-04 21:09 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-04 21:09 [GIT PULL 1/6] Broadcom defconfig changes for 5.19 Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli [this message] 2022-05-04 21:09 ` [GIT PULL 2/6] Broadcom devicetree " Florian Fainelli 2022-05-04 21:09 ` [GIT PULL 3/6] Broadcom devicetree-arm64 " Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli 2022-05-04 21:09 ` [GIT PULL 4/6] Broadcom drivers " Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli 2022-05-04 21:09 ` [GIT PULL 5/6] Broadcom maintainers " Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli 2022-05-04 21:09 ` [GIT PULL 6/6] Broadcom soc " Florian Fainelli 2022-05-04 21:09 ` Florian Fainelli 2022-05-05 19:31 ` [GIT PULL 1/6] Broadcom defconfig " patchwork-bot+linux-soc 2022-05-06 21:10 ` patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220504210942.1838248-2-f.fainelli@gmail.com \ --to=f.fainelli@gmail.com \ --cc=arinc.unal@arinc9.com \ --cc=arnd@arndb.de \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=khilman@kernel.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux@rempel-privat.de \ --cc=o.rempel@pengutronix.de \ --cc=olof@lixom.net \ --cc=phil@raspberrypi.com \ --cc=rafal@milecki.pl \ --cc=singh.kuldeep87k@gmail.com \ --cc=soc@kernel.org \ --cc=stefan.wahren@i2se.com \ --cc=takayoshi.shimamoto.360@gmail.com \ --cc=william.zhang@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.