[PATCH v5] fpga: dfl: Allow Port to be linked to FME's DFL

[Tianfei Zhang <tianfei.zhang@intel.com>]

From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

Currently we use PORTn_OFFSET to locate PORT DFLs, and PORT DFLs are not
connected FME DFL. But for some cases (e.g. Intel Open FPGA Stack device),
PORT DFLs are connected to FME DFL directly, so we don't need to search
PORT DFLs via PORTn_OFFSET again. If BAR value of PORTn_OFFSET is 0x7
(FME_PORT_OFST_BAR_SKIP) then driver will skip searching the DFL for that
port. If BAR value is invalid, return -EINVAL.

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
---
v5: use "break" instead of "goto".
    add Acked-by Tag.
v4: move the location of FME_PORT_OFST_BAR_SKIP definition.
v3: remove dev_dbg and use goto instead of break.
v2: return -EINVAL if bar number invalid.
---
 drivers/fpga/dfl-pci.c | 9 +++++++++
 drivers/fpga/dfl.h     | 1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index 86ed9e4223d3..1df525a933f2 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -263,6 +263,15 @@ static int find_dfls_by_default(struct pci_dev *pcidev,
 			 */
 			bar = FIELD_GET(FME_PORT_OFST_BAR_ID, v);
 			offset = FIELD_GET(FME_PORT_OFST_DFH_OFST, v);
+			if (bar == FME_PORT_OFST_BAR_SKIP) {
+				continue;
+			} else if (bar >= PCI_STD_NUM_BARS) {
+				dev_err(&pcidev->dev, "bad BAR %d for port %d\n",
+					bar, i);
+				ret = -EINVAL;
+				break;
+			}
+
 			start = pci_resource_start(pcidev, bar) + offset;
 			len = pci_resource_len(pcidev, bar) - offset;
 
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 53572c7aced0..06cfcd5e84bb 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -89,6 +89,7 @@
 #define FME_HDR_NEXT_AFU	NEXT_AFU
 #define FME_HDR_CAP		0x30
 #define FME_HDR_PORT_OFST(n)	(0x38 + ((n) * 0x8))
+#define FME_PORT_OFST_BAR_SKIP	7
 #define FME_HDR_BITSTREAM_ID	0x60
 #define FME_HDR_BITSTREAM_MD	0x68
 
-- 
2.26.2