All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: x86@kernel.org
Cc: linux-kernel@vger.kernel.org, peterz@infradead.org,
	jpoimboe@redhat.com, brgerst@gmail.com, jiangshanlai@gmail.com,
	Andrew.Cooper3@citrix.com, mark.rutland@arm.com,
	Borislav Petkov <bp@suse.de>
Subject: [PATCH 3/6] x86/entry: Use PUSH_AND_CLEAR_REGS for compat
Date: Fri, 06 May 2022 14:14:34 +0200	[thread overview]
Message-ID: <20220506121631.293889636@infradead.org> (raw)
In-Reply-To: 20220506121431.563656641@infradead.org

Since the upper regs don't exist for ia32 code, preserving them
doesn't hurt and it simplifies the code.

This doesn't add any attack surface that would not already be
available through INT80.

Notably:

 - 32bit SYSENTER: didn't clear si, dx, cx.

 - 32bit SYSCALL, INT80: *do* clear si since the C functions don't
   take a second argument.

 - 64bit: didn't clear si since the C functions take a second
   argument; except the error_entry path might have only one argument,
   so clearing si was missing here.

32b SYSENTER should be clearing all those 3 registers, nothing uses them
and selftests pass.

Unconditionally clear rsi since it simplifies code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/entry/calling.h         |    1 
 arch/x86/entry/entry_64_compat.S |   87 +--------------------------------------
 2 files changed, 4 insertions(+), 84 deletions(-)

--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -99,6 +99,7 @@ For 32-bit we have the following convent
 	 * well before they could be put to use in a speculative execution
 	 * gadget.
 	 */
+	xorl	%esi,  %esi	/* nospec si  */
 	xorl	%edx,  %edx	/* nospec dx  */
 	xorl	%ecx,  %ecx	/* nospec cx  */
 	xorl	%r8d,  %r8d	/* nospec r8  */
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -83,32 +83,7 @@ SYM_INNER_LABEL(entry_SYSENTER_compat_af
 	movl	%eax, %eax
 
 	pushq	%rax			/* pt_regs->orig_ax */
-	pushq	%rdi			/* pt_regs->di */
-	pushq	%rsi			/* pt_regs->si */
-	pushq	%rdx			/* pt_regs->dx */
-	pushq	%rcx			/* pt_regs->cx */
-	pushq	$-ENOSYS		/* pt_regs->ax */
-	pushq   $0			/* pt_regs->r8  = 0 */
-	xorl	%r8d, %r8d		/* nospec   r8 */
-	pushq   $0			/* pt_regs->r9  = 0 */
-	xorl	%r9d, %r9d		/* nospec   r9 */
-	pushq   $0			/* pt_regs->r10 = 0 */
-	xorl	%r10d, %r10d		/* nospec   r10 */
-	pushq   $0			/* pt_regs->r11 = 0 */
-	xorl	%r11d, %r11d		/* nospec   r11 */
-	pushq   %rbx                    /* pt_regs->rbx */
-	xorl	%ebx, %ebx		/* nospec   rbx */
-	pushq   %rbp                    /* pt_regs->rbp (will be overwritten) */
-	xorl	%ebp, %ebp		/* nospec   rbp */
-	pushq   $0			/* pt_regs->r12 = 0 */
-	xorl	%r12d, %r12d		/* nospec   r12 */
-	pushq   $0			/* pt_regs->r13 = 0 */
-	xorl	%r13d, %r13d		/* nospec   r13 */
-	pushq   $0			/* pt_regs->r14 = 0 */
-	xorl	%r14d, %r14d		/* nospec   r14 */
-	pushq   $0			/* pt_regs->r15 = 0 */
-	xorl	%r15d, %r15d		/* nospec   r15 */
-
+	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
 	UNWIND_HINT_REGS
 
 	cld
@@ -225,35 +200,7 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_saf
 SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
-	pushq	%rdi			/* pt_regs->di */
-	pushq	%rsi			/* pt_regs->si */
-	xorl	%esi, %esi		/* nospec   si */
-	pushq	%rdx			/* pt_regs->dx */
-	xorl	%edx, %edx		/* nospec   dx */
-	pushq	%rbp			/* pt_regs->cx (stashed in bp) */
-	xorl	%ecx, %ecx		/* nospec   cx */
-	pushq	$-ENOSYS		/* pt_regs->ax */
-	pushq   $0			/* pt_regs->r8  = 0 */
-	xorl	%r8d, %r8d		/* nospec   r8 */
-	pushq   $0			/* pt_regs->r9  = 0 */
-	xorl	%r9d, %r9d		/* nospec   r9 */
-	pushq   $0			/* pt_regs->r10 = 0 */
-	xorl	%r10d, %r10d		/* nospec   r10 */
-	pushq   $0			/* pt_regs->r11 = 0 */
-	xorl	%r11d, %r11d		/* nospec   r11 */
-	pushq   %rbx                    /* pt_regs->rbx */
-	xorl	%ebx, %ebx		/* nospec   rbx */
-	pushq   %rbp                    /* pt_regs->rbp (will be overwritten) */
-	xorl	%ebp, %ebp		/* nospec   rbp */
-	pushq   $0			/* pt_regs->r12 = 0 */
-	xorl	%r12d, %r12d		/* nospec   r12 */
-	pushq   $0			/* pt_regs->r13 = 0 */
-	xorl	%r13d, %r13d		/* nospec   r13 */
-	pushq   $0			/* pt_regs->r14 = 0 */
-	xorl	%r14d, %r14d		/* nospec   r14 */
-	pushq   $0			/* pt_regs->r15 = 0 */
-	xorl	%r15d, %r15d		/* nospec   r15 */
-
+	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
 	UNWIND_HINT_REGS
 
 	movq	%rsp, %rdi
@@ -380,35 +327,7 @@ SYM_CODE_START(entry_INT80_compat)
 	pushq	0*8(%rax)		/* regs->orig_ax */
 .Lint80_keep_stack:
 
-	pushq	%rdi			/* pt_regs->di */
-	pushq	%rsi			/* pt_regs->si */
-	xorl	%esi, %esi		/* nospec   si */
-	pushq	%rdx			/* pt_regs->dx */
-	xorl	%edx, %edx		/* nospec   dx */
-	pushq	%rcx			/* pt_regs->cx */
-	xorl	%ecx, %ecx		/* nospec   cx */
-	pushq	$-ENOSYS		/* pt_regs->ax */
-	pushq   %r8			/* pt_regs->r8 */
-	xorl	%r8d, %r8d		/* nospec   r8 */
-	pushq   %r9			/* pt_regs->r9 */
-	xorl	%r9d, %r9d		/* nospec   r9 */
-	pushq   %r10			/* pt_regs->r10*/
-	xorl	%r10d, %r10d		/* nospec   r10 */
-	pushq   %r11			/* pt_regs->r11 */
-	xorl	%r11d, %r11d		/* nospec   r11 */
-	pushq   %rbx                    /* pt_regs->rbx */
-	xorl	%ebx, %ebx		/* nospec   rbx */
-	pushq   %rbp                    /* pt_regs->rbp */
-	xorl	%ebp, %ebp		/* nospec   rbp */
-	pushq   %r12                    /* pt_regs->r12 */
-	xorl	%r12d, %r12d		/* nospec   r12 */
-	pushq   %r13                    /* pt_regs->r13 */
-	xorl	%r13d, %r13d		/* nospec   r13 */
-	pushq   %r14                    /* pt_regs->r14 */
-	xorl	%r14d, %r14d		/* nospec   r14 */
-	pushq   %r15                    /* pt_regs->r15 */
-	xorl	%r15d, %r15d		/* nospec   r15 */
-
+	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
 	UNWIND_HINT_REGS
 
 	cld



  parent reply	other threads:[~2022-05-06 12:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-06 12:14 [PATCH 0/6] x86: Various cleanups and fixes Peter Zijlstra
2022-05-06 12:14 ` [PATCH 1/6] x86/mm: Simplify RESERVE_BRK() Peter Zijlstra
2022-05-06 15:09   ` [tip: x86/asm] " tip-bot2 for Josh Poimboeuf
2022-05-06 12:14 ` [PATCH 2/6] x86/entry: Simplify entry_INT80_compat() Peter Zijlstra
2022-05-06 15:09   ` [tip: x86/asm] " tip-bot2 for Linus Torvalds
2022-05-06 12:14 ` Peter Zijlstra [this message]
2022-05-06 15:09   ` [tip: x86/asm] x86/entry: Use PUSH_AND_CLEAR_REGS for compat tip-bot2 for Peter Zijlstra
2022-05-07  2:54   ` [PATCH 3/6] " Lai Jiangshan
2022-05-19 16:24   ` Guenter Roeck
2022-05-19 17:00     ` Peter Zijlstra
2022-05-19 17:11       ` Josh Poimboeuf
2022-05-19 17:35         ` Josh Poimboeuf
2022-05-20  1:11           ` Lai Jiangshan
2022-05-20  2:46             ` Guenter Roeck
2022-05-20 15:55             ` Josh Poimboeuf
2022-05-06 12:14 ` [PATCH 4/6] x86/entry: Remove skip_r11rcx Peter Zijlstra
2022-05-06 15:09   ` [tip: x86/asm] " tip-bot2 for Peter Zijlstra
2022-05-07  2:52   ` [PATCH 4/6] " Lai Jiangshan
2022-05-06 12:14 ` [PATCH 5/6] linkage: Fix issue with missing symbol size Peter Zijlstra
2022-05-06 15:08   ` [tip: x86/asm] " tip-bot2 for Peter Zijlstra
2022-05-06 12:14 ` [PATCH 6/6] objtool: Fix STACK_FRAME_NON_STANDARD reloc type Peter Zijlstra
2022-05-06 15:08   ` [tip: x86/asm] " tip-bot2 for Peter Zijlstra
2022-05-06 16:05   ` [PATCH 6/6] " Josh Poimboeuf
2022-05-06 20:26   ` [tip: x86/asm] " tip-bot2 for Peter Zijlstra
2022-05-19 18:31 [PATCH 3/6] x86/entry: Use PUSH_AND_CLEAR_REGS for compat Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220506121631.293889636@infradead.org \
    --to=peterz@infradead.org \
    --cc=Andrew.Cooper3@citrix.com \
    --cc=bp@suse.de \
    --cc=brgerst@gmail.com \
    --cc=jiangshanlai@gmail.com \
    --cc=jpoimboe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.