All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Macpaul Lin <macpaul.lin@mediatek.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>
Subject: [PATCH next v3 1/2] arm64: dts: mediatek: mt8195: add efuse node and cells
Date: Tue, 10 May 2022 20:10:26 +0800	[thread overview]
Message-ID: <20220510121027.19041-1-chunfeng.yun@mediatek.com> (raw)

Add efuse node and cells used by t-phy to fix the bit shift issue

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3:
  add reviewed-by and tested-by;
  fix duplicated unit-address warning;

NOTE:
  based on v5.18-next/dts64 of matthias.bgg's branch;

v2: no changes, just based on new mt8195.dtsi

---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 55 ++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index b57e620c2c72..d5bc4cf5f4ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -691,6 +691,53 @@
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184,1 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184,2 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186,1 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186,2 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188,1 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188,2 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189,1 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189,2 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;
@@ -873,6 +920,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
@@ -897,6 +948,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	 <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Macpaul Lin <macpaul.lin@mediatek.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>
Subject: [PATCH next v3 1/2] arm64: dts: mediatek: mt8195: add efuse node and cells
Date: Tue, 10 May 2022 20:10:26 +0800	[thread overview]
Message-ID: <20220510121027.19041-1-chunfeng.yun@mediatek.com> (raw)

Add efuse node and cells used by t-phy to fix the bit shift issue

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3:
  add reviewed-by and tested-by;
  fix duplicated unit-address warning;

NOTE:
  based on v5.18-next/dts64 of matthias.bgg's branch;

v2: no changes, just based on new mt8195.dtsi

---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 55 ++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index b57e620c2c72..d5bc4cf5f4ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -691,6 +691,53 @@
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184,1 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184,2 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186,1 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186,2 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188,1 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188,2 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189,1 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189,2 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;
@@ -873,6 +920,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
@@ -897,6 +948,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	 <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Macpaul Lin <macpaul.lin@mediatek.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>
Subject: [PATCH next v3 1/2] arm64: dts: mediatek: mt8195: add efuse node and cells
Date: Tue, 10 May 2022 20:10:26 +0800	[thread overview]
Message-ID: <20220510121027.19041-1-chunfeng.yun@mediatek.com> (raw)

Add efuse node and cells used by t-phy to fix the bit shift issue

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3:
  add reviewed-by and tested-by;
  fix duplicated unit-address warning;

NOTE:
  based on v5.18-next/dts64 of matthias.bgg's branch;

v2: no changes, just based on new mt8195.dtsi

---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 55 ++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index b57e620c2c72..d5bc4cf5f4ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -691,6 +691,53 @@
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184,1 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184,2 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186,1 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186,2 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188,1 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188,2 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189,1 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189,2 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;
@@ -873,6 +920,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
@@ -897,6 +948,10 @@
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-05-10 12:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-10 12:10 Chunfeng Yun [this message]
2022-05-10 12:10 ` [PATCH next v3 1/2] arm64: dts: mediatek: mt8195: add efuse node and cells Chunfeng Yun
2022-05-10 12:10 ` Chunfeng Yun
2022-05-10 12:10 ` [PATCH next v3 2/2] arm64: dts: mediatek: mt8195: enable usb remote wakeup Chunfeng Yun
2022-05-10 12:10   ` Chunfeng Yun
2022-05-10 12:10   ` Chunfeng Yun
2022-05-11  2:31   ` Macpaul Lin
2022-05-11  2:31     ` Macpaul Lin
2022-05-11  2:31     ` Macpaul Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220510121027.19041-1-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=macpaul.lin@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.