[PATCH 2/9] remoteproc: qcom: q6v5-mss: Add modem support on MSM8953

[Sireesh Kodali <sireeshkodali1@gmail.com>]

The modem on the MSM8953 platform is similar to the modem on the MSM8996
platform in terms of set up. It differs primarily in the way it needs SCM
to bless the MPSS firmware region.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
 1 file changed, 58 insertions(+), 6 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index af217de75e4d..a73fdcddeda4 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -234,6 +234,7 @@ struct q6v5 {
 
 enum {
 	MSS_MSM8916,
+	MSS_MSM8953,
 	MSS_MSM8974,
 	MSS_MSM8996,
 	MSS_MSM8998,
@@ -687,12 +688,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		}
 		goto pbl_wait;
 	} else if (qproc->version == MSS_MSM8996 ||
-		   qproc->version == MSS_MSM8998) {
+		   qproc->version == MSS_MSM8998 ||
+		   qproc->version == MSS_MSM8953) {
 		int mem_pwr_ctl;
 
 		/* Override the ACC value if required */
-		writel(QDSP6SS_ACC_OVERRIDE_VAL,
-		       qproc->reg_base + QDSP6SS_STRAP_ACC);
+		if (qproc->version != MSS_MSM8953)
+			writel(QDSP6SS_ACC_OVERRIDE_VAL,
+					qproc->reg_base + QDSP6SS_STRAP_ACC);
 
 		/* Assert resets, stop core */
 		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -734,7 +737,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 
 		/* Turn on L1, L2, ETB and JU memories 1 at a time */
-		if (qproc->version == MSS_MSM8996) {
+		if (qproc->version == MSS_MSM8996 ||
+			qproc->version == MSS_MSM8953) {
 			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 			i = 19;
 		} else {
@@ -1314,7 +1318,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
 	}
 
-	/*
+	if (qproc->version == MSS_MSM8953) {
+		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
+		if (ret) {
+			dev_err(qproc->dev,
+					"setting up mpss memory failed: %d\n", ret);
+			goto release_firmware;
+		}
+	}
+
+	/**
 	 * In case of a modem subsystem restart on secure devices, the modem
 	 * memory can be reclaimed only after MBA is loaded.
 	 */
@@ -1413,7 +1426,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
 		}
 		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-
 		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
 		if (ret < 0) {
 			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
@@ -1422,6 +1434,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 		}
 	}
 
+
 	/* Transfer ownership of modem ddr region to q6 */
 	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
 				      qproc->mpss_phys, qproc->mpss_size);
@@ -2198,6 +2211,44 @@ static const struct rproc_hexagon_res msm8996_mss = {
 	.version = MSS_MSM8996,
 };
 
+static const struct rproc_hexagon_res msm8953_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_pd_names = (char*[]) {
+			"cx",
+			"mx",
+			NULL
+	},
+	.active_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mss",
+			.uV = 1050000,
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_clk_names = (char*[]){
+			"xo",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"mem",
+			NULL
+	},
+	.need_mem_protection = false,
+	.has_alt_reset = false,
+	.has_spare_reg = false,
+	.version = MSS_MSM8953,
+};
+
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -2301,6 +2352,7 @@ static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
+	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
 	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
-- 
2.36.0