All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Bailon <abailon@baylibre.com>
To: robh+dt@kernel.org, krzk+dt@kernel.org, matthias.bgg@gmail.com,
	p.zabel@pengutronix.de
Cc: rafael@kernel.org, daniel.lezcano@linaro.org, amitk@kernel.org,
	rui.zhang@intel.com, michael.kao@mediatek.com,
	ben.tseng@mediatek.com, ethan.chang@mediatek.com,
	frank-w@public-files.de, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, khilman@baylibre.com,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	Alexandre Bailon <abailon@baylibre.com>
Subject: [PATCH v6 7/7] arm64: dts: mt8195: Add thermal zone
Date: Thu, 12 May 2022 14:24:33 +0200	[thread overview]
Message-ID: <20220512122433.1399802-8-abailon@baylibre.com> (raw)
In-Reply-To: <20220512122433.1399802-1-abailon@baylibre.com>

From: Tinghan Shen <tinghan.shen@mediatek.com>

This adds the thermal zone for the mt8195.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 103 +++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 12887fb4d0d1..d6e5b595a89f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -823,6 +823,21 @@ spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100b000 {
+			compatible = "mediatek,mt8195-lvts";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>,
+				<0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "lvts_clk";
+			resets = <&infracfg_rst 1>,
+					<&infracfg_rst 2>;
+			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
+			nvmem-cell-names = "e_data1","e_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1627,4 +1642,92 @@ vencsys_core1: clock-controller@1b000000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_big1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 0>;
+		};
+		cpu_big2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 1>;
+		};
+		cpu_big3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 2>;
+		};
+		cpu_big4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 3>;
+		};
+		cpu_little1{
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 4>;
+		};
+		cpu_little2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 5>;
+		};
+		cpu_little3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 6>;
+		};
+		cpu_little4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 7>;
+		};
+		vpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 8>;
+		};
+		vpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 9>;
+		};
+		gpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 10>;
+		};
+		gpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 11>;
+		};
+		vdec {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 12>;
+		};
+		img {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 13>;
+		};
+		infra {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 14>;
+		};
+		cam1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 15>;
+		};
+		cam2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 16>;
+		};
+	};
 };
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Bailon <abailon@baylibre.com>
To: robh+dt@kernel.org, krzk+dt@kernel.org, matthias.bgg@gmail.com,
	p.zabel@pengutronix.de
Cc: devicetree@vger.kernel.org, daniel.lezcano@linaro.org,
	rafael@kernel.org, khilman@baylibre.com,
	linux-pm@vger.kernel.org, amitk@kernel.org,
	linux-kernel@vger.kernel.org, michael.kao@mediatek.com,
	ethan.chang@mediatek.com, linux-mediatek@lists.infradead.org,
	Alexandre Bailon <abailon@baylibre.com>,
	rui.zhang@intel.com, ben.tseng@mediatek.com,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 7/7] arm64: dts: mt8195: Add thermal zone
Date: Thu, 12 May 2022 14:24:33 +0200	[thread overview]
Message-ID: <20220512122433.1399802-8-abailon@baylibre.com> (raw)
In-Reply-To: <20220512122433.1399802-1-abailon@baylibre.com>

From: Tinghan Shen <tinghan.shen@mediatek.com>

This adds the thermal zone for the mt8195.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 103 +++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 12887fb4d0d1..d6e5b595a89f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -823,6 +823,21 @@ spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100b000 {
+			compatible = "mediatek,mt8195-lvts";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>,
+				<0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "lvts_clk";
+			resets = <&infracfg_rst 1>,
+					<&infracfg_rst 2>;
+			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
+			nvmem-cell-names = "e_data1","e_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1627,4 +1642,92 @@ vencsys_core1: clock-controller@1b000000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_big1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 0>;
+		};
+		cpu_big2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 1>;
+		};
+		cpu_big3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 2>;
+		};
+		cpu_big4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 3>;
+		};
+		cpu_little1{
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 4>;
+		};
+		cpu_little2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 5>;
+		};
+		cpu_little3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 6>;
+		};
+		cpu_little4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 7>;
+		};
+		vpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 8>;
+		};
+		vpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 9>;
+		};
+		gpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 10>;
+		};
+		gpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 11>;
+		};
+		vdec {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 12>;
+		};
+		img {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 13>;
+		};
+		infra {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 14>;
+		};
+		cam1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 15>;
+		};
+		cam2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 16>;
+		};
+	};
 };
-- 
2.35.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Bailon <abailon@baylibre.com>
To: robh+dt@kernel.org, krzk+dt@kernel.org, matthias.bgg@gmail.com,
	p.zabel@pengutronix.de
Cc: rafael@kernel.org, daniel.lezcano@linaro.org, amitk@kernel.org,
	rui.zhang@intel.com, michael.kao@mediatek.com,
	ben.tseng@mediatek.com, ethan.chang@mediatek.com,
	frank-w@public-files.de, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, khilman@baylibre.com,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	Alexandre Bailon <abailon@baylibre.com>
Subject: [PATCH v6 7/7] arm64: dts: mt8195: Add thermal zone
Date: Thu, 12 May 2022 14:24:33 +0200	[thread overview]
Message-ID: <20220512122433.1399802-8-abailon@baylibre.com> (raw)
In-Reply-To: <20220512122433.1399802-1-abailon@baylibre.com>

From: Tinghan Shen <tinghan.shen@mediatek.com>

This adds the thermal zone for the mt8195.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 103 +++++++++++++++++++++++
 1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 12887fb4d0d1..d6e5b595a89f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -823,6 +823,21 @@ spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100b000 {
+			compatible = "mediatek,mt8195-lvts";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>,
+				<0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "lvts_clk";
+			resets = <&infracfg_rst 1>,
+					<&infracfg_rst 2>;
+			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
+			nvmem-cell-names = "e_data1","e_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1627,4 +1642,92 @@ vencsys_core1: clock-controller@1b000000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_big1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 0>;
+		};
+		cpu_big2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 1>;
+		};
+		cpu_big3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 2>;
+		};
+		cpu_big4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 3>;
+		};
+		cpu_little1{
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 4>;
+		};
+		cpu_little2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 5>;
+		};
+		cpu_little3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 6>;
+		};
+		cpu_little4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 7>;
+		};
+		vpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 8>;
+		};
+		vpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 9>;
+		};
+		gpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 10>;
+		};
+		gpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 11>;
+		};
+		vdec {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 12>;
+		};
+		img {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 13>;
+		};
+		infra {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 14>;
+		};
+		cam1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 15>;
+		};
+		cam2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 16>;
+		};
+	};
 };
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-12 12:25 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-12 12:24 [PATCH v6 0/7] Add LVTS architecture thermal Alexandre Bailon
2022-05-12 12:24 ` Alexandre Bailon
2022-05-12 12:24 ` Alexandre Bailon
2022-05-12 12:24 ` [PATCH v6 1/7] thermal: mediatek: Relocate driver to mediatek folder Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-17 11:54   ` Rex-BC Chen
2022-05-17 11:54     ` Rex-BC Chen
2022-05-17 11:54     ` Rex-BC Chen
2022-05-12 12:24 ` [PATCH v6 2/7] dt-bindings: thermal: Add binding document for mt6873 thermal controller Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 14:25   ` Krzysztof Kozlowski
2022-05-12 14:25     ` Krzysztof Kozlowski
2022-05-12 14:25     ` Krzysztof Kozlowski
2022-05-17 17:59     ` Rob Herring
2022-05-17 17:59       ` Rob Herring
2022-05-17 17:59       ` Rob Herring
2022-05-12 12:24 ` [PATCH v6 3/7] thermal: mediatek: Add LVTS drivers for SoC theraml zones Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 14:29   ` Krzysztof Kozlowski
2022-05-12 14:29     ` Krzysztof Kozlowski
2022-05-12 14:29     ` Krzysztof Kozlowski
2022-05-17 12:13   ` Rex-BC Chen
2022-05-17 12:13     ` Rex-BC Chen
2022-05-17 12:13     ` Rex-BC Chen
2022-05-12 12:24 ` [PATCH v6 4/7] dt-bindings: thermal: Add binding document for mt8195 thermal controller Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 14:30   ` Krzysztof Kozlowski
2022-05-12 14:30     ` Krzysztof Kozlowski
2022-05-12 14:30     ` Krzysztof Kozlowski
2022-05-12 12:24 ` [PATCH v6 5/7] thermal: mediatek: Add thermal zone settings for mt8195 Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24 ` [PATCH v6 6/7] arm64: dts: mt8195: Add efuse node to mt8195 Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 12:24 ` Alexandre Bailon [this message]
2022-05-12 12:24   ` [PATCH v6 7/7] arm64: dts: mt8195: Add thermal zone Alexandre Bailon
2022-05-12 12:24   ` Alexandre Bailon
2022-05-12 14:32   ` Krzysztof Kozlowski
2022-05-12 14:32     ` Krzysztof Kozlowski
2022-05-12 14:32     ` Krzysztof Kozlowski
2022-05-12 12:33 ` [PATCH v6 0/7] Add LVTS architecture thermal Lothar Waßmann
2022-05-12 12:33   ` Lothar Waßmann
2022-05-12 12:33   ` Lothar Waßmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220512122433.1399802-8-abailon@baylibre.com \
    --to=abailon@baylibre.com \
    --cc=amitk@kernel.org \
    --cc=ben.tseng@mediatek.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ethan.chang@mediatek.com \
    --cc=frank-w@public-files.de \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=michael.kao@mediatek.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=tinghan.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.