From: Alberto Faria <afaria@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, "Alberto Faria" <afaria@redhat.com>,
"Kevin Wolf" <kwolf@redhat.com>,
"Hanna Reitz" <hreitz@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>
Subject: [PATCH v2 04/10] crypto: Make block callbacks return 0 on success
Date: Fri, 13 May 2022 16:57:43 +0100 [thread overview]
Message-ID: <20220513155749.2488070-2-afaria@redhat.com> (raw)
In-Reply-To: <20220513155418.2486450-1-afaria@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
---
block/crypto.c | 52 +++++++++++++++++-----------------
block/qcow2.c | 22 +++++++-------
crypto/block-luks.c | 8 +++---
crypto/block.c | 6 ++--
include/crypto/block.h | 32 ++++++++++-----------
tests/unit/test-crypto-block.c | 38 ++++++++++++-------------
6 files changed, 79 insertions(+), 79 deletions(-)
diff --git a/block/crypto.c b/block/crypto.c
index e7f5c4e31a..11c3ddbc73 100644
--- a/block/crypto.c
+++ b/block/crypto.c
@@ -55,12 +55,12 @@ static int block_crypto_probe_generic(QCryptoBlockFormat format,
}
-static ssize_t block_crypto_read_func(QCryptoBlock *block,
- size_t offset,
- uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp)
+static int block_crypto_read_func(QCryptoBlock *block,
+ size_t offset,
+ uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp)
{
BlockDriverState *bs = opaque;
ssize_t ret;
@@ -70,15 +70,15 @@ static ssize_t block_crypto_read_func(QCryptoBlock *block,
error_setg_errno(errp, -ret, "Could not read encryption header");
return ret;
}
- return buflen;
+ return 0;
}
-static ssize_t block_crypto_write_func(QCryptoBlock *block,
- size_t offset,
- const uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp)
+static int block_crypto_write_func(QCryptoBlock *block,
+ size_t offset,
+ const uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp)
{
BlockDriverState *bs = opaque;
ssize_t ret;
@@ -88,7 +88,7 @@ static ssize_t block_crypto_write_func(QCryptoBlock *block,
error_setg_errno(errp, -ret, "Could not write encryption header");
return ret;
}
- return buflen;
+ return 0;
}
@@ -99,12 +99,12 @@ struct BlockCryptoCreateData {
};
-static ssize_t block_crypto_create_write_func(QCryptoBlock *block,
- size_t offset,
- const uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp)
+static int block_crypto_create_write_func(QCryptoBlock *block,
+ size_t offset,
+ const uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp)
{
struct BlockCryptoCreateData *data = opaque;
ssize_t ret;
@@ -114,13 +114,13 @@ static ssize_t block_crypto_create_write_func(QCryptoBlock *block,
error_setg_errno(errp, -ret, "Could not write encryption header");
return ret;
}
- return ret;
+ return 0;
}
-static ssize_t block_crypto_create_init_func(QCryptoBlock *block,
- size_t headerlen,
- void *opaque,
- Error **errp)
+static int block_crypto_create_init_func(QCryptoBlock *block,
+ size_t headerlen,
+ void *opaque,
+ Error **errp)
{
struct BlockCryptoCreateData *data = opaque;
Error *local_error = NULL;
@@ -139,7 +139,7 @@ static ssize_t block_crypto_create_init_func(QCryptoBlock *block,
data->prealloc, 0, &local_error);
if (ret >= 0) {
- return ret;
+ return 0;
}
error:
diff --git a/block/qcow2.c b/block/qcow2.c
index d5a1e8bc43..c43238a006 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -94,9 +94,9 @@ static int qcow2_probe(const uint8_t *buf, int buf_size, const char *filename)
}
-static ssize_t qcow2_crypto_hdr_read_func(QCryptoBlock *block, size_t offset,
- uint8_t *buf, size_t buflen,
- void *opaque, Error **errp)
+static int qcow2_crypto_hdr_read_func(QCryptoBlock *block, size_t offset,
+ uint8_t *buf, size_t buflen,
+ void *opaque, Error **errp)
{
BlockDriverState *bs = opaque;
BDRVQcow2State *s = bs->opaque;
@@ -113,12 +113,12 @@ static ssize_t qcow2_crypto_hdr_read_func(QCryptoBlock *block, size_t offset,
error_setg_errno(errp, -ret, "Could not read encryption header");
return -1;
}
- return buflen;
+ return 0;
}
-static ssize_t qcow2_crypto_hdr_init_func(QCryptoBlock *block, size_t headerlen,
- void *opaque, Error **errp)
+static int qcow2_crypto_hdr_init_func(QCryptoBlock *block, size_t headerlen,
+ void *opaque, Error **errp)
{
BlockDriverState *bs = opaque;
BDRVQcow2State *s = bs->opaque;
@@ -151,13 +151,13 @@ static ssize_t qcow2_crypto_hdr_init_func(QCryptoBlock *block, size_t headerlen,
return -1;
}
- return ret;
+ return 0;
}
-static ssize_t qcow2_crypto_hdr_write_func(QCryptoBlock *block, size_t offset,
- const uint8_t *buf, size_t buflen,
- void *opaque, Error **errp)
+static int qcow2_crypto_hdr_write_func(QCryptoBlock *block, size_t offset,
+ const uint8_t *buf, size_t buflen,
+ void *opaque, Error **errp)
{
BlockDriverState *bs = opaque;
BDRVQcow2State *s = bs->opaque;
@@ -174,7 +174,7 @@ static ssize_t qcow2_crypto_hdr_write_func(QCryptoBlock *block, size_t offset,
error_setg_errno(errp, -ret, "Could not read encryption header");
return -1;
}
- return buflen;
+ return 0;
}
static QDict*
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index fe8f04ffb2..f62be6836b 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -495,7 +495,7 @@ qcrypto_block_luks_load_header(QCryptoBlock *block,
void *opaque,
Error **errp)
{
- ssize_t rv;
+ int rv;
size_t i;
QCryptoBlockLUKS *luks = block->opaque;
@@ -856,7 +856,7 @@ qcrypto_block_luks_store_key(QCryptoBlock *block,
QCRYPTO_BLOCK_LUKS_SECTOR_SIZE,
splitkey, splitkeylen,
opaque,
- errp) != splitkeylen) {
+ errp) < 0) {
goto cleanup;
}
@@ -903,7 +903,7 @@ qcrypto_block_luks_load_key(QCryptoBlock *block,
g_autofree uint8_t *splitkey = NULL;
size_t splitkeylen;
g_autofree uint8_t *possiblekey = NULL;
- ssize_t rv;
+ int rv;
g_autoptr(QCryptoCipher) cipher = NULL;
uint8_t keydigest[QCRYPTO_BLOCK_LUKS_DIGEST_LEN];
g_autoptr(QCryptoIVGen) ivgen = NULL;
@@ -1193,7 +1193,7 @@ qcrypto_block_luks_erase_key(QCryptoBlock *block,
garbagesplitkey,
splitkeylen,
opaque,
- &local_err) != splitkeylen) {
+ &local_err) < 0) {
error_propagate(errp, local_err);
return -1;
}
diff --git a/crypto/block.c b/crypto/block.c
index eb057948b5..7bb4b74a37 100644
--- a/crypto/block.c
+++ b/crypto/block.c
@@ -115,7 +115,7 @@ QCryptoBlock *qcrypto_block_create(QCryptoBlockCreateOptions *options,
}
-static ssize_t qcrypto_block_headerlen_hdr_init_func(QCryptoBlock *block,
+static int qcrypto_block_headerlen_hdr_init_func(QCryptoBlock *block,
size_t headerlen, void *opaque, Error **errp)
{
size_t *headerlenp = opaque;
@@ -126,12 +126,12 @@ static ssize_t qcrypto_block_headerlen_hdr_init_func(QCryptoBlock *block,
}
-static ssize_t qcrypto_block_headerlen_hdr_write_func(QCryptoBlock *block,
+static int qcrypto_block_headerlen_hdr_write_func(QCryptoBlock *block,
size_t offset, const uint8_t *buf, size_t buflen,
void *opaque, Error **errp)
{
/* Discard the bytes, we're not actually writing to an image */
- return buflen;
+ return 0;
}
diff --git a/include/crypto/block.h b/include/crypto/block.h
index 7a65e8e402..4f63a37872 100644
--- a/include/crypto/block.h
+++ b/include/crypto/block.h
@@ -29,24 +29,24 @@ typedef struct QCryptoBlock QCryptoBlock;
/* See also QCryptoBlockFormat, QCryptoBlockCreateOptions
* and QCryptoBlockOpenOptions in qapi/crypto.json */
-typedef ssize_t (*QCryptoBlockReadFunc)(QCryptoBlock *block,
- size_t offset,
- uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp);
+typedef int (*QCryptoBlockReadFunc)(QCryptoBlock *block,
+ size_t offset,
+ uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp);
-typedef ssize_t (*QCryptoBlockInitFunc)(QCryptoBlock *block,
- size_t headerlen,
- void *opaque,
- Error **errp);
+typedef int (*QCryptoBlockInitFunc)(QCryptoBlock *block,
+ size_t headerlen,
+ void *opaque,
+ Error **errp);
-typedef ssize_t (*QCryptoBlockWriteFunc)(QCryptoBlock *block,
- size_t offset,
- const uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp);
+typedef int (*QCryptoBlockWriteFunc)(QCryptoBlock *block,
+ size_t offset,
+ const uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp);
/**
* qcrypto_block_has_format:
diff --git a/tests/unit/test-crypto-block.c b/tests/unit/test-crypto-block.c
index 3b1f0d509f..3417b67be5 100644
--- a/tests/unit/test-crypto-block.c
+++ b/tests/unit/test-crypto-block.c
@@ -188,12 +188,12 @@ static struct QCryptoBlockTestData {
};
-static ssize_t test_block_read_func(QCryptoBlock *block,
- size_t offset,
- uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp)
+static int test_block_read_func(QCryptoBlock *block,
+ size_t offset,
+ uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp)
{
Buffer *header = opaque;
@@ -201,14 +201,14 @@ static ssize_t test_block_read_func(QCryptoBlock *block,
memcpy(buf, header->buffer + offset, buflen);
- return buflen;
+ return 0;
}
-static ssize_t test_block_init_func(QCryptoBlock *block,
- size_t headerlen,
- void *opaque,
- Error **errp)
+static int test_block_init_func(QCryptoBlock *block,
+ size_t headerlen,
+ void *opaque,
+ Error **errp)
{
Buffer *header = opaque;
@@ -216,16 +216,16 @@ static ssize_t test_block_init_func(QCryptoBlock *block,
buffer_reserve(header, headerlen);
- return headerlen;
+ return 0;
}
-static ssize_t test_block_write_func(QCryptoBlock *block,
- size_t offset,
- const uint8_t *buf,
- size_t buflen,
- void *opaque,
- Error **errp)
+static int test_block_write_func(QCryptoBlock *block,
+ size_t offset,
+ const uint8_t *buf,
+ size_t buflen,
+ void *opaque,
+ Error **errp)
{
Buffer *header = opaque;
@@ -234,7 +234,7 @@ static ssize_t test_block_write_func(QCryptoBlock *block,
memcpy(header->buffer + offset, buf, buflen);
header->offset = offset + buflen;
- return buflen;
+ return 0;
}
--
2.35.3
next prev parent reply other threads:[~2022-05-13 16:20 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 15:54 [PATCH v2 00/10] Implement bdrv_{pread, pwrite, pwrite_sync, pwrite_zeroes}() using generated_co_wrapper Alberto Faria
2022-05-13 15:54 ` [PATCH v2 01/10] block: Add a 'flags' param to bdrv_{pread, pwrite, pwrite_sync}() Alberto Faria
2022-05-13 15:54 ` [PATCH v2 02/10] block: Change bdrv_{pread, pwrite, pwrite_sync}() param order Alberto Faria
2022-05-13 15:57 ` [PATCH v2 03/10] block: Make bdrv_{pread, pwrite}() return 0 on success Alberto Faria
2022-05-13 15:57 ` Alberto Faria [this message]
2022-05-17 14:26 ` [PATCH v2 04/10] crypto: Make block callbacks " Eric Blake
2022-05-13 15:57 ` [PATCH v2 05/10] block: Make bdrv_co_pwrite() take a const buffer Alberto Faria
2022-05-13 15:57 ` [PATCH v2 06/10] block: Make 'bytes' param of bdrv_co_{pread, pwrite, preadv, pwritev}() an int64_t Alberto Faria
2022-05-17 14:32 ` Eric Blake
2022-05-17 14:48 ` Alberto Faria
2022-05-18 12:48 ` Eric Blake
2022-05-13 15:57 ` [PATCH v2 07/10] block: Implement bdrv_{pread, pwrite, pwrite_zeroes}() using generated_co_wrapper Alberto Faria
2022-05-13 15:57 ` [PATCH v2 08/10] block: Add bdrv_co_pwrite_sync() Alberto Faria
2022-05-17 14:35 ` Eric Blake
2022-05-13 15:57 ` [PATCH v2 09/10] block: Use bdrv_co_pwrite_sync() when caller is coroutine_fn Alberto Faria
2022-05-17 9:29 ` Vladimir Sementsov-Ogievskiy
2022-05-13 15:57 ` [PATCH v2 10/10] block/qcow2: Use bdrv_pwrite_sync() in qcow2_mark_dirty() Alberto Faria
2022-05-17 14:36 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513155749.2488070-2-afaria@redhat.com \
--to=afaria@redhat.com \
--cc=berrange@redhat.com \
--cc=hreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.